SIST EN ISO 7622-1:1997
(Main)Steel cord conveyor belts - Longitudinal traction test - Part 1: Measurement of elongation (ISO 7622-1:1984)
Steel cord conveyor belts - Longitudinal traction test - Part 1: Measurement of elongation (ISO 7622-1:1984)
This part specifies a method for the determination of the elongation of steel cords constituting the carcase of conveyor belts, when subjected to a force corresponding to 10 % and to 60 % of the specified tensile strength. Applies exclusively to conveyor belts with a steel carcase.
Stahlseilfördergurte - Zugversuch in Längsrichtung - Teil 1: Dehnungs-Messung in Längsrichtung (ISO 7622-1:1984)
Dieser Teil von ISO 7622 beschreibt ein Verfahren, um die Dehnung der Stahlseilein der Karkasse eines Fördergurtes zu bestimmen, wobei sie einer Kraft unterworfen werden, die 10% und 60% der spezifizierten Seilbruchkraft entspricht. Es wird ausschließlich bei Stahlseilfördergurten angewendet. Anmerkung - Ein Verfahren zur Bestimmung der Zugfestigkeit ist in ISO 7622/2 beschrieben.
Courroies transporteuses a câbles d'acier - Essai de traction dans le sens longitudinal - Partie 1: Mesurage de l'allongement (ISO 7622-1:1984)
La présente partie de l'ISO 7622 spécifie une méthode de détermination de l'allongement des câbles d'acier constituant la carcasse des courroies, soumis à un effort correspondant à 10 % et à 60 % de la résistance à la rupture spécifiée. Elle s'applique exclusivement aux courroies transporteuses à câbles d'acier.
NOTE -- Une méthode de détermination de la résistance est spécifiée dans l'ISO 7622/2.
Trakovi tračnih transporterjev z vložkom iz jeklenih vrvi - Vzdolžni natezni preskus - 1. del: Merjenje raztezkov (ISO 7622-1:1984)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 7622-1:1997
01-marec-1997
7UDNRYLWUDþQLKWUDQVSRUWHUMHY]YORåNRPL]MHNOHQLKYUYL9]GROåQLQDWH]QLSUHVNXV
GHO 0HUMHQMHUD]WH]NRY ,62
Steel cord conveyor belts - Longitudinal traction test - Part 1: Measurement of elongation
(ISO 7622-1:1984)
Stahlseilfördergurte - Zugversuch in Längsrichtung - Teil 1: Dehnungs-Messung in
Längsrichtung (ISO 7622-1:1984)
Courroies transporteuses a câbles d'acier - Essai de traction dans le sens longitudinal -
Partie 1: Mesurage de l'allongement (ISO 7622-1:1984)
Ta slovenski standard je istoveten z: EN ISO 7622-1:1995
ICS:
53.040.20 Deli za transporterje Components for conveyors
SIST EN ISO 7622-1:1997 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 7622-1:1997
---------------------- Page: 2 ----------------------
SIST EN ISO 7622-1:1997
---------------------- Page: 3 ----------------------
SIST EN ISO 7622-1:1997
---------------------- Page: 4 ----------------------
SIST EN ISO 7622-1:1997
International Standard 76221 I
INTERNATIONAL ORGANIZATION FOR STANDARDIZATlON*ME)I(~YHAPO~HAR OPfAHM3ALWlR fl0 CTAH~APTUl3A~lrlM.ORGANlSATlON INTERNATIONALE DE NORMALISATION
Steel cord conveyor belts - Longitudinal traction test -
Part 1: Measurement of elongation
Partie 7 : Mesurage de l’allongemen t
Essai de traction dans le sens longitudinal -
Courroies transporteuses ;i &b/es d’acier -
First edition - 1984-12-15
Ref. No. IS0 7622/l-1984 (E)
.
UDC 621.867.21 : 620.172222
conveyor belts, tests, tension tests, determination, elongation.
Descriptors :
0
Price based on 2 pages
v,
---------------------- Page: 5 ----------------------
SIST EN ISO 7622-1:1997
Foreword
IS0 (the International Organization for Standardization) is a worldwide federation of
national standards bodies (IS0 member bodies). The work of preparing International
Standards is normally carried out through IS0 technical committees. Each member
- body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the work.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the IS0 Council. They are approved in accordance with IS0 procedures requiring at
least 75 % approval by the member bodies voting.
International Standard IS0 7622/l was prepared by Technical Committee lSO/TC 41,
Pulleys and belts (including veebelts).
International Organization for Standardization, 1984
0
Printed in Switzerland
---------------------- Page: 6 ----------------------
SIST EN ISO 7622-1:1997
IS0 7622/l-1984 (El
INTERNATIONAL STANDARD
Steel cord conveyor belts - Longitudinal traction test -
Part 1: Measurement of elongation
0 Introduction 4 Apparatus
The test method described in this part of IS0 7622 is intended
4. I Dynamometric tensile testing machine, complying
to verify, by destructive testing, the elongation properties of
with the following requirements :
steel cords constituting the carcass of conveyor belts. As it is a
a) the force exerted by the machine shall be adaptable to
destructive test, it should be used only in the event of litigation
the strength of the test specimen;
or where no certificate of compliance is issued by the cord
manufacturer.
b) the rate of separation of the jaws shall be capable of
being set at 25 + 5 mm/min and shall be capable of being
NOTE - Notice should be taken that differences in elongation can oc-
maintained constant;
cur between raw steel cords and rubber-coated steel cords. For this
c) the separation between the jaws shall be capable of
reason the values determined in accordance with this method and the
v
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.