SIST EN ISO 7622-1:2013

Steel cord conveyor belts - Longitudinal traction test - Part 1: Measurement of elongation (ISO 7622-1:2013)

This part of ISO 7622 specifies a method for the determination of the elongation of steel cords constituting the carcass of conveyor belts, when subjected to a force corresponding to 10 % and 60 % of the specified tensile strength. It applies exclusively to conveyor belts with a steel carcass.

Stahlseilfördergurte - Zugversuch in Längsrichtung - Teil 1: Dehnungs-Messung (ISO 7622-1:2013)

Courroies transporteuses à câbles d'acier - Essai de traction dans le sens longitudinal - Partie 1: Mesurage de l'allongement (ISO 7622-1:2013)

L'ISO 7622-1:2013 spécifie une méthode pour la détermination de l'allongement des câbles d'acier constituant la carcasse des courroies transporteuses lorsqu'ils sont soumis à un effort correspondant à 10 % et à 60 % de la résistance à la rupture spécifiée. Elle s'applique exclusivement aux courroies transporteuses à carcasse en acier.

Naprave za kontinuirni transport - Trakovi tračnih transporterjev z jeklenim vložkom - Vzdolžni natezni preskus - 1. del: Merjenje raztezkov (ISO 7622-1:2013)

Ta del standarda ISO 7622 določa metodo za ugotavljanje raztezka železnih vložkov, ki predstavljajo trup trakov tračnih transporterjev, ko so izpostavljeni sili, ki ustreza 10 % in 60 % določene natezne trdnosti. Uporablja se izključno za trakove tračnih transporterjev z jeklenim trupom.

General Information

• Status: Published
• Public Enquiry End Date: 28-Feb-2013
• Publication Date: 17-Nov-2013
• ICS: 53.040.20 - Components for conveyors
• Technical Committee: DTN - Lift and transport appliances
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 23-Oct-2013
• Due Date: 28-Dec-2013
• Completion Date: 18-Nov-2013
• Ref Project: EN ISO 7622-1:2013 - Steel cord conveyor belts - Longitudinal traction test - Part 1: Measurement of elongation (ISO 7622-1:2013)

Relations

• Replaces: SIST EN ISO 7622-1:1997 - Steel cord conveyor belts - Longitudinal traction test - Part 1: Measurement of elongation (ISO 7622-1:1984)
• Effective Date: 01-Dec-2013
• Replaces: SIST ISO 7622-1:1999 - Steel cord conveyor belts -- Longitudinal traction test -- Part 1: Measurement of elongation
• Effective Date: 01-Dec-2013

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 7622-1:2013
01-december-2013
1DGRPHãþD
SIST EN ISO 7622-1:1997
SIST ISO 7622-1:1999
1DSUDYH]DNRQWLQXLUQLWUDQVSRUW7UDNRYLWUDþQLKWUDQVSRUWHUMHY]MHNOHQLP
YORåNRP9]GROåQLQDWH]QLSUHVNXVGHO0HUMHQMHUD]WH]NRY,62
Steel cord conveyor belts - Longitudinal traction test - Part 1: Measurement of elongation
(ISO 7622-1:2013)
Stahlseilfördergurte - Zugversuch in Längsrichtung - Teil 1: Dehnungs-Messung (ISO
7622-1:2013)
Courroies transporteuses à câbles d'acier - Essai de traction dans le sens longitudinal -
Partie 1: Mesurage de l'allongement (ISO 7622-1:2013)
Ta slovenski standard je istoveten z: EN ISO 7622-1:2013
ICS:
53.040.20 Deli za transporterje Components for conveyors
SIST EN ISO 7622-1:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 7622-1:2013

---------------------- Page: 2 ----------------------

SIST EN ISO 7622-1:2013


EUROPEAN STANDARD
EN ISO 7622-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
May 2013
ICS 53.040.20 Supersedes EN ISO 7622-1:1995
English Version
Steel cord conveyor belts - Longitudinal traction test - Part 1:
Measurement of elongation (ISO 7622-1:2013)
Courroies transporteuses à câbles d'acier - Essai de
traction dans le sens longitudinal - Partie 1: Mesurage de
l'allongement (ISO 7622-1:2013)
This European Standard was approved by CEN on 2 April 2013.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7622-1:2013: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 7622-1:2013
EN ISO 7622-1:2013 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 7622-1:2013
EN ISO 7622-1:2013 (E)
Foreword
This document (EN ISO 7622-1:2013) has been prepared by Technical Committee ISO/TC 41 “Pulleys and
belts (including veebelts)” in collaboration with Technical Committee CEN/TC 188 “Conveyor belts” the
secretariat of which is held by SNV.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by November 2013, and conflicting national standards shall be withdrawn
at the latest by November 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 7622-1:1995.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 7622-1:2013 has been approved by CEN as EN ISO 7622-1:2013 without any modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 7622-1:2013

---------------------- Page: 6 ----------------------

SIST EN ISO 7622-1:2013
INTERNATIONAL ISO
STANDARD 7622-1
Second edition
2013-05-01
Steel cord conveyor belts —
Longitudinal traction test —
Part 1:
Measurement of elongation
Courroies transporteuses à câbles d’acier — Essai de traction dans le
sens longitudinal —
Partie 1: Mesurage de l’allongement
Reference number
ISO 7622-1:2013(E)
©
ISO 2013

---------------------- Page: 7 ----------------------

SIST EN ISO 7622-1:2013
ISO 7622-1:2013(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 7622-1:2013
ISO 7622-1:2013(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Principle . 1
4 Apparatus . 1
5 Test specimens. 2
6 Procedure. 2
7 Expression of results .
...