oSIST prEN ISO 20870:2016

Footwear - Ageing conditioning (ISO/DIS 20870:2016)

This standard specifies laboratory procedures which are intended to imitate the effects of naturally occurring reactions.  The physical properties of interest are measured before and after the application of the specified treatments. The effect of the  ageing procedures on any of the physical properties of the material may be examined

Schuhe - Konditionierung für die Alterungsprüfung (ISO/DIS 20870:2016)

Chaussures - Conditionnement en vue du vieillissement (ISO/DIS 20870:2016)

Obutev - Staranje (ISO/DIS 20870:2016)

General Information

• Status: Not Published
• Public Enquiry End Date: 24-Apr-2016
• ICS: 61.060 - Footwear
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 15-Jan-2020
• Due Date: 20-Jan-2020
• Completion Date: 15-Jan-2020
• Ref Project: prEN ISO 20870 - Footwear - Ageing conditioning

Relations

• Revised: SIST EN 12749:2000 - Footwear - Ageing conditioning
• Effective Date: 01-Apr-2016
• Revised: SIST EN 12749:2000 - Footwear - Ageing conditioning
• Effective Date: 18-Jan-2023
• Revised: SIST EN 12749:2000 - Footwear - Ageing conditioning
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 20870:2016
01-april-2016
Obutev - Staranje (ISO/DIS 20870:2016)
Footwear - Ageing conditioning (ISO/DIS 20870:2016)
Schuhe - Konditionierung für die Alterungsprüfung (ISO/DIS 20870:2016)
Chaussures - Conditionnement en vue du vieillissement (ISO/DIS 20870:2016)
Ta slovenski standard je istoveten z: prEN ISO 20870
ICS:
61.060 Obuvala Footwear
oSIST prEN ISO 20870:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 20870:2016

---------------------- Page: 2 ----------------------
oSIST prEN ISO 20870:2016
DRAFT INTERNATIONAL STANDARD
ISO/DIS 20870
ISO/TC 216 Secretariat: AENOR
Voting begins on: Voting terminates on:
2016-01-28 2016-04-28
Footwear — Ageing conditioning
Chaussures — Conditionnement en vue du vieillissement
ICS: 61.060
ISO/CEN PARALLEL PROCESSING
This draft has been developed within the European Committee for Standardization
(CEN), and processed under the CEN lead mode of collaboration as defined in the
Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member
bodies for a parallel five month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments
received, will be submitted to a parallel two-month approval vote in ISO and
THIS DOCUMENT IS A DRAFT CIRCULATED
formal vote in CEN.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
To expedite distribution, this document is circulated as received from the
IN ADDITION TO THEIR EVALUATION AS
committee secretariat. ISO Central Secretariat work of editing and text
BEING ACCEPTABLE FOR INDUSTRIAL,
composition will be undertaken at publication stage.
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 20870:2015(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2015

---------------------- Page: 3 ----------------------
oSIST prEN ISO 20870:2016
ISO/DIS 20870:2015(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2015 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 20870:2016
ISO/WD 20870
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 20870 was prepared by Technical Committee ISO
...