SIST EN 300 765-1 V1.2.1:2003
(Main)Digital Enhanced Cordless Telecommunications (DECT); Radio in the Local Loop (RLL) Access Profile (RAP); Part 1: Basic telephony services
Digital Enhanced Cordless Telecommunications (DECT); Radio in the Local Loop (RLL) Access Profile (RAP); Part 1: Basic telephony services
To specify the mandatory frame synchronization requirements for RAP-1, FP. To specify requirements for a RAP-1 CRFP terminal and requirement s for RAP-1 FP support of CRFP.
Digitalne izboljšane brezvrvične telekomunikacije (DECT) – Profil dostopa (RAP) radia v krajevni zanki (RLL) – 1. del: Osnovne telefonske storitve
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 300 765-1 V1.2.1:2003
01-december-2003
'LJLWDOQHL]EROMãDQHEUH]YUYLþQHWHOHNRPXQLNDFLMH '(&7 ±3URILOGRVWRSD 5$3
UDGLDYNUDMHYQL]DQNL 5// ±GHO 2VQRYQHWHOHIRQVNHVWRULWYH
Digital Enhanced Cordless Telecommunications (DECT); Radio in the Local Loop (RLL)
Access Profile (RAP); Part 1: Basic telephony services
Ta slovenski standard je istoveten z: EN 300 765-1 Version 1.2.1
ICS:
33.070.30 'LJLWDOQHL]EROMãDQH Digital Enhanced Cordless
EUH]YUYLþQHWHOHNRPXQLNDFLMH Telecommunications (DECT)
'(&7
SIST EN 300 765-1 V1.2.1:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 300 765-1 V1.2.1:2003
---------------------- Page: 2 ----------------------
SIST EN 300 765-1 V1.2.1:2003
ETSI EN 300 765-1 V1.2.1 (2000-08)
European Standard (Telecommunications series)
Digital Enhanced Cordless Telecommunications (DECT);
Radio in the Local Loop (RLL) Access Profile (RAP);
Part 1: Basic telephony services
---------------------- Page: 3 ----------------------
SIST EN 300 765-1 V1.2.1:2003
2 ETSI EN 300 765-1 V1.2.1 (2000-08)
Reference
REN/DECT-CI0170
Keywords
DECT, FWA, RLL, WLL
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.:+33492944200 Fax:+33 493654716
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at http://www.etsi.org/tb/status/
If you find errors in the present document, send your comment to:
editor@etsi.fr
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2000.
All rights reserved.
ETSI
---------------------- Page: 4 ----------------------
SIST EN 300 765-1 V1.2.1:2003
3 ETSI EN 300 765-1 V1.2.1 (2000-08)
Contents
Intellectual Property Rights.6
Foreword.6
1 Scope .7
2 References .7
3 Definitions, symbols and abbreviations .8
3.1 Definitions.8
3.2 Symbols.10
3.3 Abbreviations .11
4 Introduction .12
4.1 Reference model.12
4.2 Services & facilities.12
5 Feature definitions.12
5.1 Network (NWK) features (only differences from GAP) .12
5.2 Application features (only differences from GAP) .13
6 Service definitions.14
6.1 Data Link Control (DLC) service definitions.14
6.1.1 Reference to GAP .14
6.1.2 LU 7 service.14
6.2 Medium Access Control (MAC) service definitions .14
6.2.1 Reference to GAP .14
6.2.2 MAC service definitions (additional to GAP) .14
7 Interoperability requirements .15
7.1 General .15
7.2 NWK features.16
7.3 DLC services .17
7.4 MAC services.17
7.5 Physical Layer (PHL) services .18
7.6 Application features .18
7.7 NWK feature to procedure mapping .19
7.8 DLC service to procedure mapping.22
7.9 MAC service to procedure mapping.23
7.10 Application feature to procedure mapping .24
7.11 General requirements .24
8 Procedure description.24
9 NWK layer procedures.24
9.1 Reference to GAP.24
9.1.1 Release procedure for "On-hook (conditional release)" .24
9.1.2 CLIP, inband.26
9.1.3 On-hook/off-hook explicit acknowledgement .27
9.2 Maintenance calls.28
9.2.1 Incoming maintenance call .28
9.2.2 Outgoing maintenance call .28
9.2.3 Outgoing call during maintenance call .28
9.2.4 Incoming call during maintenance call .28
9.3 Sending OA&M information.28
9.3.1 Physical resources fault .29
9.3.2 Remote test .29
9.3.3 Alarms .30
9.3.4 On-air modification of user parameters .30
9.3.4.1 Modification of existing users parameters .30
9.3.4.2 Additional subscriptions to the same fixed part .31
ETSI
---------------------- Page: 5 ----------------------
SIST EN 300 765-1 V1.2.1:2003
4 ETSI EN 300 765-1 V1.2.1 (2000-08)
9.3.4.3 Derivation of AC for additional subscriptions .31
9.3.5 Start quality measurement .32
9.3.6 Stop quality measurement.32
9.3.7 Remote configuration .32
9.3.8 Claim Actions .33
9.3.8.1 Claim Actions FT side Initiated .34
9.3.8.2 Claim Actions CTA Initiated .35
9.3.9 Remote resynchronization .35
9.3.10 Advanced file transfer.36
9.4 RLL-CC.36
9.4.1 Metering pulses.36
9.4.2 Switch from voice to data service FT initiated .37
9.4.3 Switch from voice to data service CTA initiated .37
9.4.4 Coin collection.38
9.4.5 Ground start .38
9.4.6 Line polarity reversal .38
9.4.7 Switch from 32 kbit/s to 64 kbit/s bearer service (FT initiated) .38
9.4.8 Switching from 32 kbit/s to 64 kbit/s bearer service CTA initiated.40
9.4.9 Line parked .42
9.4.10 Switching from 64 kbit/s to 32 kbit/s bearer service FT initiated.43
9.4.11 Switching from 64 kbit/s to 32 kbit/s bearer service CTA initiated.44
9.5 Analogue leased line establishment.46
10 DLC layer procedures .47
10.1 General .47
10.2 Reference to GAP.47
10.3 LU7 64 kbit/s data bearer service.47
11 MAC layer procedures .47
11.1 Reference to GAP.47
11.2 Advance timing .47
11.3 LU7 64 kbit/s data bearer service.48
11.4 Downlink broadcast, Extended Fixed Part Capabilities .48
11.5 Blind slot information .48
11.6 Improved channel selection rules .49
12 Physical layer requirements.49
12.1 General .49
12.2 Reference to GAP.49
12.3 LU7 64 kbit/s data bearer service.49
13 Requirements regarding the speech transmission.49
13.1 General .49
13.2 Echo control requirements for CTAs intended for 2-wire connections.49
13.3 Disabling the echo control functions.50
13.3.1 General.50
13.3.2 Modem services .50
14 Requirements regarding fax and data transmission.50
14.1 General .50
14.2 Requirements.50
14.2.1 Implementation of the LU7 PCM services. .50
15 Management procedures.51
16 Interworking with WRS applications.51
16.1 General .51
16.2 Requirements.51
16.3 WRS maintenance calls.51
16.3.1 Incoming WRS maintenance call.51
16.3.2 Outgoing WRS maintenance call.51
16.3.3 Maintenance during WRS MM operation.51
17 Application procedures.52
17.1 General .52
ETSI
---------------------- Page: 6 ----------------------
SIST EN 300 765-1 V1.2.1:2003
5 ETSI EN 300 765-1 V1.2.1 (2000-08)
17.2 Reference to GAP.52
17.3 Manual entry of the PARK and AC to CTA's .52
17.3.1 Entering the PARK .52
17.3.2 Entering the AC .53
Annex A (informative): PP locking procedure for on air subscription .54
Annex B (informative): Tones, progress indicator and U-plane connection.55
Annex C (informative): EN 300 175 additions/modifications.56
C.1 NWK layer additions/modifications (part 5).56
C.2 MAC layer additions/modifications (part 3) .57
Annex D (normative): Codings for "OA&M" and "RAP-CC" messages .59
D.1 General Structure for RAP <> Information Element .59
D.2 RAP IWU-TO-IWU Contents Proprietary .60
D.2.1 RAP-OA&M Service type coding.60
D.3 RAP IWU-TO-IWU Contents Standardized .61
D.3.1 RAP-CC Service type coding.61
D.3.2 RAP-OA&M Service type coding.62
Annex E (normative): Description of remote tests and quality measurement .65
Annex F (informative): LU8 service.66
F.1 Physical layer service .66
F.2 MAC layer service.66
F.3 DLC layer service.66
Annex G (normative): Synchronization Requirements for Fixed Parts.67
Annex H (normative): Management of the overlapping between decadic dialling and
register recall recognition times .68
Annex I (informative): Installation.69
I.1 Above roof-top DECT WLL systems and GSM 1800 macro cell systems.69
History .70
ETSI
---------------------- Page: 7 ----------------------
SIST EN 300 765-1 V1.2.1:2003
6 ETSI EN 300 765-1 V1.2.1 (2000-08)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://www.etsi.org/ipr).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This European Standard (Telecommunications series) has been produced by ETSI Project Digital Enhanced Cordless
Telecommunications (DECT).
The present document is part 1 of a multi-part Telecommunications series covering the Radio in the Local Loop (RLL)
Access Profile (RAP), as identified below:
Part 1: "Basic telephony services";
Part 2: "Advanced telephony services".
Every EN prepared by ETSI is a voluntary standard. The present document may contain text concerning conformance
testing of the equipment to which it relates. This text should be considered as guidance only and does not make the
present document mandatory.
The present document is based on EN 300 175, parts 1 [1] to 8 [8] and EN 300 444 [10]. The present document has
been developed in accordance to the rules of documenting a profile specification as described in ISO/IEC 9646-6 [12].
National transposition dates
Date of adoption of this EN: 23 June 2000
Date of latest announcement of this EN (doa): 30 September 2000
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 March 2001
Date of withdrawal of any conflicting National Standard (dow): 31 March 2001
ETSI
---------------------- Page: 8 ----------------------
SIST EN 300 765-1 V1.2.1:2003
7 ETSI EN 300 765-1 V1.2.1 (2000-08)
1 Scope
The present document specifies that set of technical requirements for Digital Enhanced Cordless Telecommunications
(DECT) Fixed Part (FP) and DECT Cordless Terminal Adapter (CTA) necessary for the support of the Radio in the
Local Loop (RLL) Access Profile (RAP).
The objective of the present document is to ensure the air interface interoperability of DECT RAP CTAs and DECT
RAP FPs and Wireless Relay Stations (WRS) if applied.
In addition, the present document defines the features, services, procedures etc. for the CTA and the FT, which are
provision mandatory either in the CTA or in the FT, as well as some elements that are provision optional but still
process mandatory.
Another objective is to use as much as possible from the existing GAP profile, but to exclude the not applicable GAP-
features. Therefore most of the RAP features refer to GAP [10] features and the necessary additional features (for
example Operation, Administration, and Maintenance (OA&M)) are listed and explained in the present document.
The present document (i.e. part 1), contains the so called "Plain Old Telephone Service (POTS)" services including
leased lines and 64 kbit/s bearer service.
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication, edition number, version number, etc.) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
• A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same
number.
[1] ETSI EN 300 175-1: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 1: Overview".
[2] ETSI EN 300 175-2: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 2: Physical Layer (PHL)".
[3] ETSI EN 300 175-3: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 3: Medium Access Control (MAC) Layer".
[4] ETSI EN 300 175-4: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 4: Data Link Control (DLC) Layer".
[5] ETSI EN 300 175-5: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 5: Network (NWK) Layer".
[6] ETSI EN 300 175-6: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 6: Identities and Addressing".
[7] ETSI EN 300 175-7: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 7: Security Features".
[8] ETSI EN 300 175-8: "Digital Enhanced Cordless Telecommunications (DECT); Common
Interface (CI); Part 8: Speech Coding and Transmission".
[9] ETSI EN 300 176: "Digital Enhanced Cordless Telecommunications (DECT); Approval Test
Specification".
ETSI
---------------------- Page: 9 ----------------------
SIST EN 300 765-1 V1.2.1:2003
8 ETSI EN 300 765-1 V1.2.1 (2000-08)
[10] ETSI EN 300 444: "Digital Enhanced Cordless Telecommunications (DECT); Generic Access
Profile (GAP)".
[11] ETSI EN 300 700: "Digital Enhanced Cordless Telecommunications (DECT); Wireless Relay
Station (WRS)".
[12] ISO/IEC 9646-6: "Information Technology - Open system Interconnection - Conformance testing
methodology and framework: Protocol profile test specification".
[13] ISO/IEC 9646-7: "Information Technology - Open system Interconnection - Conformance testing
methodology and framework: Implementation Conformance Statements".
[14] ETSI TBR 6: "Digital Enhanced Cordless Telecommunications (DECT); General terminal
attachment requirements".
[15] ETSI TBR 10: "Digital Enhanced Cordless Telecommunications (DECT); General terminal
attachment requirements; Telephony applications".
[16] ETSI ETR 246: "Digital Enhanced Cordless Telecommunications (DECT); Application of DECT
Wireless Relay Stations (WRS)".
[17] ETSI ETR 308: "Digital Enhanced Cordless Telecommunications (DECT); Services, facilities and
configurations for DECT in the local loop".
[18] ITU-T Recommendation V.25: "Automatic answering equipment and general procedures for
automatic calling equipment on the general switched telephone network in
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.