SIST EN 4869-101:2025
(Main)Aerospace series - Expanded beam termini, fibre optic non-physical contact in EN 3645 standard cavities - Part 101: Male termini size 16 - Technical specification
Aerospace series - Expanded beam termini, fibre optic non-physical contact in EN 3645 standard cavities - Part 101: Male termini size 16 - Technical specification
This document details the dimensions and performance requirements of a multimode male size 16, non-physical contact expanded beam terminus. This terminus is suitable for use with connectors which have standard size 16 pin crimp contact cavities: connectors with cavities for contact of type EN 3155-008M16...
Luft- und Raumfahrt - Strahlaufweitender Anschluss, berührungsloser Lichtwellenleiterkontakt in EN 3645-Standardkontaktkammer - Teil 101: Multimode-Stiftanschluss, Größe 16 - Technische Lieferbedingungen
Série aérospatiale - Contact à faisceau expansé, fibre optique sans contact physique, dans alvéoles standards EN 3645 - Partie 101 : Contact mâle multimode taille 16 - Spécification technique
Le présent document détaille les exigences de dimensions et de performances d'une terminaison mâle multimode de taille 16 à faisceau élargi, à contact non physique. Cette terminaison est adaptée à une utilisation avec des connecteurs disposant de cavités de contact à sertir mâle de taille 16 standard : connecteurs avec cavités pour contact de type EN 3155-008M16.
Aeronavtika - Razširjeni optični zaključki, nefizični stik optičnih vlaken v standardnih votlinah po standardu EN 3645 - 101. del: Večrodovni moški zaključki velikosti 16 - Tehnična specifikacija
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2025
Aeronavtika - Razširjeni optični zaključki, nefizični stik optičnih vlaken v
standardnih votlinah po standardu EN 3645 - 101. del: Večrodovni moški zaključki
velikosti 16 - Tehnična specifikacija
Aerospace series - Expanded beam termini, fibre optic non-physical contact in EN 3645
standard cavities - Part 101: Male termini size 16 - Technical specification
Luft- und Raumfahrt - Strahlaufweitender Anschluss, berührungsloser
Lichtwellenleiterkontakt in EN 3645-Standardkontaktkammer - Teil 101: Multimode-
Stiftanschluss, Größe 16 - Technische Lieferbedingungen
Série aérospatiale - Contact à faisceau expansé, fibre optique sans contact physique,
dans alvéoles standards EN 3645 - Partie 101 : Contact mâle multimode taille 16 -
Spécification technique
Ta slovenski standard je istoveten z: EN 4869-101:2024
ICS:
49.090 Oprema in instrumenti v On-board equipment and
zračnih in vesoljskih plovilih instruments
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 4869-101
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2024
EUROPÄISCHE NORM
ICS 49.090
English Version
Aerospace series - Expanded beam termini, fibre optic
non-physical contact in EN 3645 standard cavities - Part
101: Multimode male termini size 16 - Technical
specification
Série aérospatiale - Terminaisons à faisceau élargi, Luft- und Raumfahrt - Strahlaufweitender Anschluss,
contact à fibre optique non physique dans des cavités berührungsloser Lichtwellenleiterkontakt in EN 3645-
EN 3645 standard - Partie 101 : Terminaisons mâles Standardkontaktkammer - Teil 101: Multimode-
multimodes taille 16 - Spécification technique Stiftanschluss, Größe 16 - Technische
Lieferbedingungen
This European Standard was approved by CEN on 19 August 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4869-101:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Fibre optic contact designation and dimensions . 5
4.1 Contact designation . 5
4.2 Contact dimensions . 6
4.3 Optical interface . 7
4.4 Cable designation . 8
5 Technical specification . 9
6 Tests according to EN 2591-100 . 9
7 Assembly process instructions . 10
7.1 Cleaning instructions . 10
7.2 Tooling . 10
7.3 Termination instructions . 10
8 Designation . 11
Bibliography . 12
European foreword
This document (EN 4869-101:2024) has been prepared by ASD-STAN.
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document shall be given the status of a national standard, either by publication of an identical text
or by endorsement, at the latest by June 2025, and conflicting national standards shall be withdrawn at
the latest by June 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this document: Austria, Belgium, Bulgaria, Croatia, Cyprus,
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
1 Scope
This document specifies the dimensions and performance requirements of a multimode male size 16,
non-physical contact expanded beam terminus. This terminus is applicable (for use) with connectors
which have standard size 16 pin crimp contact cavities: connectors with cavities for contact of type
EN 3155-008M16.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 2591-100, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 100: General
EN 2591-304, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 304: Damp heat steady state
EN 2591-312, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 312: Air leakage
EN 2591-407, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 407: Durability of contact retention system and seals
EN 2591-601, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 601: Optical elements — Insertion loss
EN 2591-6301, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 6301: Optical elements — Endurance at temperature
EN 2591-6303, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 6303: Optical elements — Cold/low pressure and damp heat
EN 2591-6305, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 6305: Optical elements — Rapid change of temperature
EN 2591-6307, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 6307: Optical elements — Salt mist
EN 2591-6314, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 6314: Optical elements — Immersion at low air pressu
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.