SIST EN 60317-12:2001/A2:2005
(Main)Specifications for particular types of winding wires -- Part 12: Polyvinyl acetal enamelled round copper wire, class 120
Specifications for particular types of winding wires -- Part 12: Polyvinyl acetal enamelled round copper wire, class 120
Superseded by EN 60317-12:2010
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten -- Teil 12: Runddrähte aus Kupfer, lackisoliert mit Polyvinylazetat, Klasse 120
Spécifications pour types particuliers de fils de bobinage -- Partie 12: Fil de section circulaire en cuivre émaillé avec acétal de polyvinyle, classe 120
Specifikacije za posebne vrste navitij – 12. del: S polivinil acetalom emajliran okrogel bakren vodnik, razred 120 (IEC 60317-12:1990/A2:2005)
General Information
Relations
Standards Content (Sample)
SLOVENSKI SIST EN 60317-
12:2001/A2:2005
STANDARD
december 2005
Specifikacije za posebne vrste navitij – 12. del: S polivinil acetalom emajliran
okrogel bakren vodnik, razred 120 (IEC 60317-12:1990/A2:2005)
Specifications for particular types of winding wires – Part 12: Polyvinyl acetal
enamelled round copper wire, class 120 (IEC 60317-12:1990/A2:2005)
ICS 29.060.10 Referenčna številka
SIST EN 60317-12:2001/A2:2005(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD EN 60317-12/A2
NORME EUROPÉENNE
EUROPÄISCHE NORM September 2005
ICS 29.060.10
English version
Specifications for particular types of winding wires
Part 12: Polyvinyl acetal enamelled round copper wire, class 120
(IEC 60317-12:1990/A2:2005)
Spécifications pour types particuliers Technische Lieferbedingungen für
de fils de bobinage bestimmte Typen von Wickeldrähten
Partie 12: Fil de section circulaire en Teil 12: Runddrähte aus Kupfer,
cuivre émaillé avec acétal de polyvinyle, lackisoliert mit Polyvinylazetat, Klasse 120
classe 120 (IEC 60317-12:1990/A2:2005)
(CEI 60317-12:1990/A2:2005)
This amendment A2 modifies the European Standard EN 60317-12:1994; it was approved by CENELEC
on 2005-08-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this amendment the status of a national standard without any
alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60317-12:1994/A2:2005 E
---------------------- Page: 2 ----------------------
EN 60317-12:1994/A2:2005 - 2 -
Foreword
The text of document 55/947/FDIS, future amendment 2 to IEC 60317-12:1990, prepared by
IEC TC 55, Winding wires, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as amendment A2 to EN 60317-12:1994 on 2005-08-01.
The following dates were fixed:
– latest date by which the amendment has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-05-01
– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2008-08-01
__________
Endorsement notice
The
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.