Integrated Services Digital Network (ISDN); Malicious Call Identification (MCID) supplementary service; Functional capabilities and information flows

Stage 2 descriptions for priority 1 and 2 services covered in the MoU on ISDN

Digitalno omrežje z integriranimi storitvami (ISDN) - Dopolnilna storitev: razpoznavanje (identifikacija) zlonamernega klica (MCID) - Funkcijske zmožnosti in informacijski tokovi

General Information

Status
Published
Publication Date
30-Apr-1997
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-May-1997
Due Date
01-May-1997
Completion Date
01-May-1997

Buy Standard

Standard
P ETS 300 129:1997
English language
25 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ETS 300 129:1997
English language
25 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Digitalno omrežje z integriranimi storitvami (ISDN) - Dopolnilna storitev: razpoznavanje (identifikacija) zlonamernega klica (MCID) - Funkcijske zmožnosti in informacijski tokoviIntegrated Services Digital Network (ISDN); Malicious Call Identification (MCID) supplementary service; Functional capabilities and information flows33.080Digitalno omrežje z integriranimi storitvami (ISDN)Integrated Services Digital Network (ISDN)ICS:Ta slovenski standard je istoveten z:ETS 300 129 E13SIST ETS 300 129:1997en01-MDQXDU19973SIST ETS 300 129:1997SLOVENSKI
STANDARD



SIST ETS 300 129:1997



EUROPEANETS 300 129TELECOMMUNICATIONMay 1992STANDARDSource: ETSI TC-SPSReference: T/S 22-10ICS:33.080Key words:ISDN, supplementary service.Integrated Services Digital Network (ISDN);Malicious Call Identification (MCID) supplementary serviceFunctional capabilities and information flowsETSIEuropean Telecommunications Standards InstituteETSI SecretariatPostal address: F-06921 Sophia Antipolis CEDEX - FRANCEOffice address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCEX.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: secretariat@etsi.frTel.: +33 92 94 42 00 - Fax: +33 93 65 47 16Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and theforegoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1992. All rights reserved.SIST ETS 300 129:1997



Page 2ETS 300 129: May 1992Whilst every care has been taken in the preparation and publication of this document, errors in content,typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to"ETSI Editing and Committee Support Dept." at the address shown on the title page.SIST ETS 300 129:1997



Page 3ETS 300 129: May 1992ContentsForeword.51Scope.72Normative references.73Definitions.84Symbols and abbreviations.85Description.86Derivation of the functional model.86.1The functional model description.86.2Description of the functional entities.96.3Relationship with a basic service.97Information flows.97.1Information flow diagrams.97.1.1Entry into the MCID service at FE3.97.1.2Information request towards FE4 upon detection of incomplete SETUPcontents for MCID service at FE3.107.1.3Functions of FE3 when calling party clears before the served user invokesthe MCID service.107.1.4Invocation of the MCID supplementary service (directly connected serveduser).117.1.5Invocation of the MCID supplementary service (served user is PTNXextension).117.1.6Functions of FE2 when calling party clears before served user (PTNXextension) invokes the MCID service.127.2Definitions of individual information flows.127.2.1Relationship ra.127.2.1.1Contents of INFORM 3.127.2.1.2Contents of INFORM 4.127.2.2Relationship rc.137.2.2.1Contents of INFORM 1.137.2.2.2Contents of INFORM 2.137.2.2.3Contents of INFORM 5.137.2.2.4Contents of INFORM 6.138SDL diagrams for functional entities.148.1FE1.148.2FE2.168.3FE3.178.4FE4.229Functional Entity Actions (FEAs).239.1FEAs of FE1.239.2FEAs of FE2.239.3FEAs of FE3.239.4FEAs of FE4.2410Allocation of functional entities to physical localities.24History.25SIST ETS 300 129:1997



Page 4ETS 300 129: May 1992Blank pageSIST ETS 300 129:1997



Page 5ETS 300 129: May 1992ForewordThis European Telecommunication Standard (ETS) has been produced by the Signalling Protocols &Switching (SPS) Technical Committee of the European Telecommunications Standards Institute (ETSI) andwas adopted having passed through the ETSI standards approval procedure.In accordance with CCITT Recommendation I.130 [1], the following three level structure is used todescribe the supplementary telecommunications services as provided by European publictelecommunications operators under the pan-European Integrated Services Digital Network (ISDN):-Stage 1: is an overall service description, from the user's stand-point;-Stage 2: identifies the functional capabilities and information flows needed to support the servicedescribed in stage 1; and-Stage 3: defines the signalling system protocols and switching functions needed to implement theservice described in stage 1.This ETS details the stage 2 aspects (functional capabilities and information flows) needed to support theMalicious Call Identification (MCID) supplementary service. The stage 1 and stage 3 aspects are detailedin ETS 300 128 (1992) and ETS 300 130 (1992), respectively.SIST ETS 300 129:1997



Page 6ETS 300 129: May 1992Blank pageSIST ETS 300 129:1997



Page 7ETS 300 129: May 19921ScopeThis standard defines the stage two of the Malicious Call Identification (MCID) supplementary service forthe pan-European Integrated Services Digital Network (ISDN) as provided by European publictelecommunications operators.
Stage two identifies the functional capabilities and the information flowsneeded to support the service description.
The stage two description also identifies user operations notdirectly associated with a call (see CCITT Recommendation I.130 [1]).This standard is specified according to the methodology specified in CCITT Recommendation Q.65 [2].This standard does not formally describe the relationship between this supplementary service and thebasic call, but where possible this information is included for guidance.This standard does not specify the requirements where the service is provided to the user via a privateISDN.This standard does not specify the requirements for the allocation of defined functional entities within aprivate ISDN; it does however define which functional entities may be allocated to a private ISDN.This standard does not specify the additional requirements where the service is provided to the user via atelecommunications network that is not an ISDN.The MCID supplementary service is applicable to all telecommunications services.This standard is applicable to the stage three standards for the ISDN MCID supplementary service.
Theterm "stage three" is also defined in CCITT Recommendation I.130 [1].
Where the text indicates thestatus of a requirement (i.e. as strict command or prohibition, as authorisation leaving freedom, or as acapability or possibility) this shall be reflected in the text of the relevant stage three standards.Conformance to this standard is met by conforming to the stage three standards with the field ofapplication appropriate to the equipment being implemented.
Therefore no method of testing is providedfor this standard.2Normative referencesThis standard incorporates by dated or undated reference, provisions from other publications.
Thesenormative references are cited at the appropriate places in the text and the publications are listedhereafter.
For dated references subsequent amendments to, or revisions of any of these publicationsapply to this ETS only when incorporated in it by amendment or revision.
For undated references thelatest edition of the publication referred to applies.[1]CCITT Recommendation I.130 (1988): "Method for the characterisation oftelecommunication services supported by an ISDN and network capabilities of anISDN".[2]CCITT recommendation Q.65 (1988): "Stage 2 of the method for thecharacterisation of services supported by an ISDN."[3]CCITT Recommendation I.112 (1988): "Vocabulary of terms for ISDNs".[4]CCITT Recommendation Q.71 (1988): "ISDN 64 kbit/s circuit mode switchedbearer serv
...

SLOVENSKI STANDARD
SIST ETS 300 129:1997
01-maj-1997
Digitalno omrežje z integriranimi storitvami (ISDN) - Dopolnilna storitev:
razpoznavanje (identifikacija) zlonamernega klica (MCID) - Funkcijske zmožnosti in
informacijski tokovi
Integrated Services Digital Network (ISDN); Malicious Call Identification (MCID)
supplementary service; Functional capabilities and information flows
Ta slovenski standard je istoveten z: ETS 300 129 Edition 1
ICS:
33.080 Digitalno omrežje z Integrated Services Digital
integriranimi storitvami Network (ISDN)
(ISDN)
SIST ETS 300 129:1997 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ETS 300 129:1997

---------------------- Page: 2 ----------------------

SIST ETS 300 129:1997
EUROPEAN ETS 300 129
TELECOMMUNICATION May 1992
STANDARD
Source: ETSI TC-SPS Reference: T/S 22-10
ICS: 33.080
ISDN, supplementary service.
Key words:
Integrated Services Digital Network (ISDN);
Malicious Call Identification (MCID) supplementary service
Functional capabilities and information flows
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
F-06921 Sophia Antipolis CEDEX - FRANCE
Postal address:
650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
Office address:
c=fr, a=atlas, p=etsi, s=secretariat - secretariat@etsi.fr
X.400: Internet:
Tel.: +33 92 94 42 00 - Fax: +33 93 65 47 16
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1992. All rights reserved.
New presentation - see History box

---------------------- Page: 3 ----------------------

SIST ETS 300 129:1997
Page 2
ETS 300 129: May 1992
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Editing and Committee Support Dept." at the address shown on the title page.

---------------------- Page: 4 ----------------------

SIST ETS 300 129:1997
Page 3
ETS 300 129: May 1992
Contents
Foreword.5
1 Scope .7
2 Normative references .7
3 Definitions.8
4 Symbols and abbreviations.8
5 Description .8
6 Derivation of the functional model .8
6.1 The functional model description.8
6.2 Description of the functional entities.9
6.3 Relationship with a basic service .9
7 Information flows.9
7.1 Information flow diagrams.9
7.1.1 Entry into the MCID service at FE3.9
7.1.2 Information request towards FE4 upon detection of incomplete SETUP
contents for MCID service at FE3.10
7.1.3 Functions of FE3 when calling party clears before the served user invokes
the MCID service .10
7.1.4 Invocation of the MCID supplementary service (directly connected served
user) .11
7.1.5 Invocation of the MCID supplementary service (served user is PTNX
extension).11
7.1.6 Functions of FE2 when calling party clears before served user (PTNX
extension) invokes the MCID service.12
7.2 Definitions of individual information flows .12
7.2.1 Relationship ra.12
7.2.1.1 Contents of INFORM 3 .12
7.2.1.2 Contents of INFORM 4 .12
7.2.2 Relationship rc .13
7.2.2.1 Contents of INFORM 1 .13
7.2.2.2 Contents of INFORM 2 .13
7.2.2.3 Contents of INFORM 5 .13
7.2.2.4 Contents of INFORM 6 .13
8 SDL diagrams for functional entities.14
8.1 FE1.14
8.2 FE2.16
8.3 FE3.17
8.4 FE4.22
9 Functional Entity Actions (FEAs).23
9.1 FEAs of FE1.23
9.2 FEAs of FE2.23
9.3 FEAs of FE3.23
9.4 FEAs of FE4.24
10 Allocation of functional entities to physical localities.24
History.25

---------------------- Page: 5 ----------------------

SIST ETS 300 129:1997
Page 4
ETS 300 129: May 1992
Blank page

---------------------- Page: 6 ----------------------

SIST ETS 300 129:1997
Page 5
ETS 300 129: May 1992
Foreword
This European Telecommunication Standard (ETS) has been produced by the Signalling Protocols &
Switching (SPS) Technical Committee of the European Telecommunications Standards Institute (ETSI) and
was adopted having passed through the ETSI standards approval procedure.
In accordance with CCITT Recommendation I.130 [1], the following three level structure is used to
describe the supplementary telecommunications services as provided by European public
telecommunications operators under the pan-European Integrated Services Digital Network (ISDN):
- Stage 1: is an overall service description, from the user's stand-point;
- Stage 2: identifies the functional capabilities and information flows needed to support the service
described in stage 1; and
- Stage 3: defines the signalling system protocols and switching functions needed to implement the
service described in stage 1.
This ETS details the stage 2 aspects (functional capabilities and information flows) needed to support the
Malicious Call Identification (MCID) supplementary service. The stage 1 and stage 3 aspects are detailed
in ETS 300 128 (1992) and ETS 300 130 (1992), respectively.

---------------------- Page: 7 ----------------------

SIST ETS 300 129:1997
Page 6
ETS 300 129: May 1992
Blank page

---------------------- Page: 8 ----------------------

SIST ETS 300 129:1997
Page 7
ETS 300 129: May 1992
1 Scope
This standard defines the stage two of the Malicious Call Identification (MCID) supplementary service for
the pan-European Integrated Services Digital Network (ISDN) as provided by European public
telecommunications operators. Stage two identifies the functional capabilities and the information flows
needed to support the service description. The stage two description also identifies user operations not
directly associated with a call (see CCITT Recommendation I.130 [1]).
This standard is specified according to the methodology specified in CCITT Recommendation Q.65 [2].
This standard does not formally describe the relationship between this supplementary service and the
basic call, but where possible this information is included for guidance.
This standard does not specify the requirements where the service is provided to the user via a private
ISDN.
This standard does not specify the requirements for the allocation of defined functional entities within a
private ISDN; it does however define which functional entities may be allocated to a private ISDN.
This standard does not specify the additional requirements where the service is provided to the user via a
telecommunications network that is not an ISDN.
The MCID supplementary service is applicable to all telecommunications services.
This standard is applicable to the stage three standards for the ISDN MCID supplementary service. The
term "stage three" is also defined in CCITT Recommendation I.130 [1]. Where the text indicates the
status of a requirement (i.e. as strict command or prohibition, as authorisation leaving freedom, or as a
capability or possibility) this shall be reflected in the text of the relevant stage three standards.
Conformance to this standard is met by conforming to the stage three standards with the field of
application appropriate to the equipment being implemented. Therefore no method of testing is provided
for this standard.
2 Normative references
This standard incorporates by dated or undated reference, provisions from other publications. These
normative references are cited at the appropriate places in the text and the publications are listed
hereafter. For dated references subsequent amendments to, or revisions of any of these publications
apply to this ETS only when incorporated in it by amendment or revision. For undated references the
latest edition of the publication referred to applies.
[1] CCITT Recommendation I.130 (1988): "Method for the characterisation of
telecommunication services supported by an ISDN and network capabilities of an
ISDN".
[2] CCITT recommendation Q.65 (1988): "Stage 2 of the method for the
characterisation of services supported by an ISDN."
[3] CCITT Recommendation I.112 (1988): "Vocabulary of terms for ISDNs".
[4] CCITT Recommendation Q.71 (1988): "ISDN 64 kbit/s circuit mode switched
bearer services".
[5] CCITT Recommendation Z.100 (1988): "Functional Specification and Description
Language (SDL)."

---------------------- Page: 9 ----------------------

SIST ETS 300 129:1997
Page 8
ETS 300 129: May 1992
3 Definitions
For the purposes of this standard, the following definitions apply:
Integrated Services Digital Network (ISDN): see CCITT Recommendation I.112 [3], § 2.3, definition
308.
Service; telecommunications service: see CCITT Recommendation I.112 [3], § 2.2, definition 201.
4 Symbols and abbreviations
For the purposes of this standard, the following symbols and abbreviations apply:
CC Call Control, typically a LE
CCA Call Control Agent, typically a TE
CLI Calling Line Identity
FE Functional Entity
FEA Functional Entity Action
LE Local Exchange
PTNX Private Telecommunication Network Exchange
TE Terminal Equipment
5 Description
Not applicable.
6 Derivation of the functional model
6.1 The functional model description
The functional model for the MCID supplementary service is shown in figure 1.
NOTE 1
�˜˜˜¿  ra  �˜˜˜¿  rb  �˜˜˜¿  rc  �˜˜˜¿
‡FE4ˆ˜˜˜˜˜˜˜˜˜˜·FE3ˆ˜˜˜˜˜˜˜˜˜˜·FE2ˆ˜˜˜˜˜˜˜˜˜˜·FE1‡
�˜˜˜�     �˜˜˜�     �˜˜˜�     �˜˜˜�
NOTE 1: This model recognises that a Private Telecommunication Network Exchange (PTNX)
(NT2) will require service control functionality (i.e. FE2) to be provided by the PTNX.
For the case where no PTNX is involved, e.g. Terminal Equipment (TE) directly
connected, generally by basic access, neither FE2 nor relationship rb exists.
NOTE 2: It is assumed that a PTNX uses access link clearing procedures independent of the
extension clearing procedures. FE2 shall meet the requirements of the stage 1 service
description and shall not delay the access throughput (see ETS 300 128 (1992),
subclause 6.2.3).
NOTE 3: FE4 provides Calling Line Identity (CLI), when requested from FE
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.