SIST EN 2559:2023/kprA1:2023

Aerospace series - Carbon, glass and aramid fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area

This document specifies methods for determining the resin content, fibre content and mass of fibre per unit area of fibre preimpregnates for aerospace use.

Luft- und Raumfahrt - Carbon-, Glas- und Aramidfaser-Prepregs - Bestimmung des Harz- und Fasermasseanteils und der flächenbezogenen Fasermasse

Dieses Dokument legt Verfahren zur Bestimmung des Harzmasseanteils, des Fasermasseanteils und der flächenbezogenen Fasermasse von Faser-Prepregs für die Luft- und Raumfahrt fest.

Série aérospatiale - Préimprégnés de fibres de carbone, de verre et d'aramide - Détermination des teneurs en résine et en fibres et de la masse surfacique de la fibre

No scope available

Aeronavtika - Predimpregnirana ogljikova, steklena in aramidna vlakna - Ugotavljanje deleža smole in vlaken ter masa vlaken na enoto površine - Dopolnilo A1

General Information

• Status: Not Published
• Public Enquiry End Date: 25-Jul-2023
• ICS: 49.025.40 - Rubber and plastics
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 5020 - Formal vote (FV) (Adopted Project)
• Start Date: 23-Jan-2024
• Due Date: 12-Mar-2024
• Completion Date: 24-Jan-2024
• Ref Project: EN 2559:2022/FprA1 - Aerospace series - Carbon, glass and aramid fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area

Relations

• Amends: SIST EN 2559:2023 - Aerospace series - Carbon, glass and aramid fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area
• Effective Date: 12-Apr-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 2559:2023/oprA1:2023
01-julij-2023
Aeronavtika - Predimpregnirana ogljikova, steklena in aramidna vlakna -
Ugotavljanje deleža smole in vlaken ter masa vlaken na enoto površine - Dopolnilo
A1
Aerospace series - Carbon, glass and aramid fibre preimpregnates - Determination of
the resin and fibre content and the mass of fibre per unit area
Luft- und Raumfahrt - Carbon-, Glas- und Aramidfaser-Prepregs - Bestimmung des
Harz- und Fasermasseanteils und der flächenbezogenen Fasermasse
Série aérospatiale - Préimprégnés de fibres de carbone, de verre et d'aramide -
Détermination des teneurs en résine et en fibres et de la masse surfacique de la fibre
Ta slovenski standard je istoveten z: EN 2559:2022/prA1
ICS:
49.025.40 Guma in polimerni materiali Rubber and plastics
SIST EN 2559:2023/oprA1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 2559:2023/oprA1:2023

---------------------- Page: 2 ----------------------
SIST EN 2559:2023/oprA1:2023


DRAFT
EUROPEAN STANDARD
EN 2559:2022
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA1
May 2023
ICS 49.025.40
English Version

Aerospace series - Carbon, glass and aramid fibre
preimpregnates - Determination of the resin and fibre
content and the mass of fibre per unit area
Série aérospatiale - Préimprégnés de fibres de carbone, Luft- und Raumfahrt - Carbon-, Glas- und Aramidfaser-
de verre et d'aramide - Détermination des teneurs en Prepregs - Bestimmung des Harz- und
résine et en fibres et de la masse surfacique de la fibre Fasermasseanteils und der flächenbezogenen
Fasermasse
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-STAN.

This draft amendment A1, if approved, will modify the European Standard EN 2559:2022. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Sp
...