SIST EN ISO 15065:2005

Countersinks for countersunk head screws with head configuration in accordance with ISO 7721 (ISO 15065:2005)

ISO 15065:2005 specifies the dimensions and designation of countersinks for countersunk head screws with a head configuration in accordance with ISO 7721. It is applicable to the types of screws according to ISO 2009, ISO 2010, ISO 1482, ISO 1483, ISO 7046-1 and ISO 7046-2, ISO 7047, ISO 7050, ISO 7051, ISO 15482, ISO 15483, ISO 14584, ISO 14586, and ISO 14587.

Senkungen für Senkschrauben mit der Kopfform nach ISO 7721 (ISO 15065:2005)

Diese Internationale Norm legt die Maße und die Bezeichnung von Senkungen für Senkschrauben mit der Kopfform nach ISO 7721 fest.
Diese Internationale Norm ist auf folgende Schraubenarten anwendbar:
-   Senkschrauben mit Schlitz nach ISO 2009;
-   Linsen-Senkschrauben mit Schlitz nach ISO 2010;
-   Senk-Blechschrauben mit Schlitz nach ISO 1482;
-   Linsensenk-Blechschrauben mit Schlitz nach ISO 1483;
-   Senkschrauben mit Kreuzschlitz nach ISO 7046-1 und ISO 7046-2;
-   Linsen-Senkschrauben mit Kreuzschlitz nach ISO 7047;
-   Senk-Blechschrauben mit Kreuzschlitz nach ISO 7050;
-   Linsensenk-Blechschrauben mit Kreuzschlitz nach ISO 7051;
-   Senk-Bohrschrauben mit Kreuzschlitz nach ISO 15482;
-   Linsensenk-Bohrschrauben mit Kreuzschlitz nach ISO 15483;
-   Linsen-Senkschrauben mit Innensechsrund nach ISO 14584;
-   Senk-Blechschrauben mit Innensechsrund nach ISO 14586;
-   Linsensenk-Blechschrauben mit Innensechsrund nach ISO 14587.
-   Senk-Bohrschrauben mit Kreuzschlitz nach ISO 15482;
-   Linsensenk-Bohrschrauben mit Kreuzschlitz nach ISO 15483;
-   Linsen-Senkschrauben mit Innensechsrund nach ISO 14584;
-   Senk-Blechschrauben mit Innensechsrund nach ISO 14586;
-               Linsensenk-Blechschrauben mit Innensechsrund nach ISO 14587.

Fraisures pour vis a tete fraisée avec une configuration de la tete conforme a l'ISO 7721 (ISO 15065:2005)

L'ISO 15065:2005 spécifie les dimensions et la désignation des fraisures pour vis à tête fraisée avec une configuration de la tête conforme à l'ISO 7721.
À ce jour, l'ISO 15065:2005 s'applique aux types de vis conformes à l'ISO 1482, à l'ISO 1483, à l'ISO 2009, à l'ISO 2010, à l'ISO 7046-1, à l'ISO 7046-2, à l'ISO 7047, à l'ISO 7050, à l'ISO 7051, à l'ISO 14584, à l'ISO 14586, à l'ISO 14587, à l'ISO 15482 et à l'ISO 15483.

Ugreznina za vijak z ugrezno glavo z obliko glave po ISO 7721 (ISO 15065 :2005)

General Information

• Status: Published
• Publication Date: 30-Apr-2005
• ICS: 21.060.10 - Bolts, screws, studs
• Technical Committee: ISEL - Mechanical elements
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-May-2005
• Due Date: 01-May-2005
• Completion Date: 01-May-2005
• Ref Project: EN ISO 15065:2005 - Countersinks for countersunk head screws with head configuration in accordance with ISO 7721 (ISO 15065:2005)

Standards Content (Sample)

SLOVENSKI STANDARD
01-maj-2005
Ugreznina za vijak z ugrezno glavo z obliko glave po ISO 7721 (ISO 15065 :2005)
Countersinks for countersunk head screws with head configuration in accordance with
ISO 7721 (ISO 15065:2005)
Senkungen für Senkschrauben mit der Kopfform nach ISO 7721 (ISO 15065:2005)
Fraisures pour vis a tete fraisée avec une configuration de la tete conforme a l'ISO 7721
(ISO 15065:2005)
Ta slovenski standard je istoveten z: EN ISO 15065:2005
ICS:
21.060.10 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 15065
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2005
ICS 21.060.10
English version
Countersinks for countersunk head screws with head
configuration in accordance with ISO 7721 (ISO 15065:2005)
Fraisures pour vis à tête fraisée avec une configuration de Senkungen für Senkschrauben mit der Kopfform nach ISO
la tête conforme à l'ISO 7721 (ISO 15065:2005) 7721 (ISO 15065:2005)
This European Standard was approved by CEN on 3 February 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15065:2005: E
worldwide for CEN national Members.

Foreword
This document (EN ISO 15065:2005) has been prepared by Technical Committee ISO/TC 2
"Fasteners" in collaboration with Technical Committee CEN/TC 185 "Threaded and non-
threaded mechanical fasteners and accessories", the secretariat of which is held by DIN.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by August 2005, and conflicting national
standards shall be withdrawn at the latest by August 2005.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Endorsement notice
The text of ISO 15065:2005 has been approved by CEN as EN ISO 15065:2005 without any
modifications.
INTERNATIONAL ISO
STANDARD 15065
First edition
2005-02-15
Countersinks for countersunk head
screws with head configuration in
accordance with ISO 7721
Fraisures pour vis à tête fraisée avec une configuration de la tête
conforme à l'ISO 7721
Reference number
ISO 15065:2005(E)
©
ISO 2005
ISO 15065:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2005
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2005 – All rights reserved

ISO 15065:2005(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. I
...