iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60044-2:2001/A1:2001

(Amendment)

Instrument transformers -- Part 2: Inductive voltage transformers

Instrument transformers -- Part 2: Inductive voltage transformers

EN following parallel vote ** SIST EN pomotoma razveljavljen 2008-05, preklic razveljavitve 2008-11. 2008-11 dodan tudi prevod naslova.

Messwandler -- Teil 2: Induktive Spannungswandler

Transformateurs de mesure -- Partie 2: Transformateurs inductifs de tension

Merilni transformatorji - 2. del: Induktivni napetostnik (IEC 6004-2:1997/A1:2000)

General Information

Status
Withdrawn
Publication Date
28-Feb-2001
Withdrawal Date
13-Aug-2014
ICS
17.220.20 - Measurement of electrical and magnetic quantities
Technical Committee
MTR - Instrument transformers
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
13-Aug-2014
Due Date
05-Sep-2014
Completion Date
14-Aug-2014
Directive
89/336/EEC - Electromagnetic compatibility (EMC)
Ref Project
EN 60044-2:1999/A1:2000 - Instrument transformers - Part 2: Inductive voltage transformers

Relations

Revised
SIST EN 61869-3:2012 - Instrument transformers - Part 3: Specific requirements for inductive voltage transformers
Effective Date
06-May-2014
Amends
SIST EN 60044-2:2001 - Instrument transformers -- Part 2: Inductive voltage transformers
Effective Date
21-Sep-2010
Amends
SIST EN 60044-2:2001 - Instrument transformers -- Part 2: Inductive voltage transformers
Effective Date
28-Jan-2023
Replaced By
SIST EN 61869-3:2012 - Instrument transformers - Part 3: Specific requirements for inductive voltage transformers
Effective Date
28-Jan-2023
Amends
SIST EN 60044-2:2001 - Instrument transformers -- Part 2: Inductive voltage transformers
Effective Date
07-Jun-2022

Buy Standard

EN 60044-2:2001/A1:2001EN 60044-2:2001/A1:2001
PreviousNext
Amendment
EN 60044-2:2001/A1:2001
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60044-2:2001/A1:2001
01-marec-2001
Merilni transformatorji - 2. del: Induktivni napetostnik (IEC 6004-2:1997/A1:2000)
Instrument transformers -- Part 2: Inductive voltage transformers
Messwandler -- Teil 2: Induktive Spannungswandler
Transformateurs de mesure -- Partie 2: Transformateurs inductifs de tension
Ta slovenski standard je istoveten z: EN 60044-2:1999/A1:2000
ICS:
17.220.20 0HUMHQMHHOHNWULþQLKLQ Measurement of electrical
PDJQHWQLKYHOLþLQ and magnetic quantities
SIST EN 60044-2:2001/A1:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60044-2:2001/A1:2001

---------------------- Page: 2 ----------------------

SI
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 50482:2008
Instrument transformers - Three-phase inductive voltage transformers having Um up to 52 kV
EN 50482:2008

This European Standard specifies the requirements and tests for new three-phase voltage transformers with Um up to 52 kV and frequencies from 15 Hz to 100 Hz, for use with electrical instruments or electrical protective devices.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60044-8:2003(Main)
Instrument transformers -- Part 8: Electronic current transformers
EN 60044-8:2002

This part of EN 60044 applies to newly manufactured electronic current transformers having an analogue voltage output or a digital output, for use with electrical measuring instruments and electrical protective devices at nominal frequencies from 15 Hz to 100 Hz.

  • Standard
    131 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST HD 587 S1:2001(Main)
Instruments transformers - Three-phase voltage transformers for voltage levels having Um up to 52 kV
HD 587 S1:1993

Handled by BTTF 56-3 (disbanded)

  • Standardization document
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60044-7:2000(Main)
Instrument transformers -- Part 7: Electronic voltage transformers
EN 60044-7:2000

Applies to newly manufactured electronic voltage transformers with analogue output, for use with electrical measuring instruments and electrical protective devices at frequencies from 15 Hz to 100 Hz. The standard covers optical arrangements with electronic components. Three-phase voltage transformers are not included, but some of the requirements apply.

  • Standard
    74 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST IEC 60044-6:1995(Main)
Instrument transformers - Part 6: Requirements for protective current transformers for transient performance
IEC 60044-6

Concerns requirements and tests, in addition to those given in chapter 1 of IEC 60185, that are necessary when inductive current transformers are used with electrical protective schemes in which the prime requirement is the maintenance of a defined performance up to several times the rated current when the current contains an exponentially decaying d.c. component of defined time constant.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62057-1:2023(Main)
Electrical energy meters - Test equipment, techniques and procedures - Part 1: Stationary meter test units (MTUs) (IEC 62057-1:2023)
EN IEC 62057-1:2023

IEC 62057-1:2023 applies to stationary meter test units (MTUs) permanently installed in laboratories, used for testing and calibration of electricity meters, in particular for their type test, acceptance test and verification test. It covers the requirements for automatic MTUs for indoor laboratory application and applies to newly manufactured MTUs to test electricity meters on 50 Hz or 60 Hz networks with an AC voltage up to 600 V (phase to neutral).
If meters are intended for system voltages not specified in this document, special requirements are agreed between the manufacturer and the purchaser.
This document also defines the kind of tests to perform as type tests / routine tests / acceptance tests and commissioning tests for MTUs.
It does not apply to:
• portable reference meters and portable sources;
• electricity meters;
• data interfaces to the meter and test procedures of data interface;
• transformer operated MTUs;
• personal computers supplied together with the MTU.

  • Standard
    80 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60404-12:2023(Main)
Magnetic materials - Part 12: Methods of test for the assessment of the thermal endurance of surface insulation coatings on electrical steel strip and sheet (IEC 60404-12:2023)
EN IEC 60404-12:2023

This part of IEC 60404 is applicable to surface insulation coatings on electrical steel strip and
sheet classified in IEC 60404-1-1.
This document defines the general principles and technical details of the tests for the
assessment of the thermal endurance of surface insulation coatings on electrical steel strip and
sheet.
The assessment is made by evaluating the change of a specified property of the surface
insulation coating due to a heat treatment at a specified temperature up to 850 °C for a specified
duration time up to 2 500 h. The specified property is measured at an ambient temperature of
(23 ± 5) °C both without heat treatment and after heat treatment.
This document is applicable to the following properties of surface insulation coatings:
– adhesion;
– surface insulation resistance;
– stacking factor.
This document is not applicable to other properties of surface insulation coatings, e.g. welding
properties, or to other effects, e.g. discoloration and off-gassing, which can be caused by
exposure to elevated temperatures.
NOTE Some of the tests take a very long time to perform and therefore they are often not appropriate for acceptance
tests of material supplied on a specific order.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62052-41:2023(Main)
Electricity metering equipment - General requirements, tests and test conditions - Part 41: Energy registration methods and requirements for multi-energy and multi-rate meters (IEC 62052-41:2022)
EN IEC 62052-41:2022

IEC 62052-41:2022 applies only to newly manufactured multi-energy and/or multi-rate static meters and it applies to their type tests only.
This document applies to electricity metering equipment designed to:
• measure and control electrical energy on networks with voltage up to 1 000 V AC, or 1 500 V DC;
• have all functional elements, including add-on modules, enclosed in, or forming a single meter case with exception of indicating displays;
• operate with integrated displays;
• operate with detached indicating displays, or without an indicating display;
• be installed in a specified matching socket or rack;
• optionally, provide additional functions other than those for measurement of electrical energy.
Meters designed for operation with Low Power Instrument Transformers (LPITs as defined in the IEC 61869 series) may be tested for compliance with this document and the relevant IEC 62053 series documents only if such meters and their LPITs are tested together as directly connected meters.
This document does not apply to:
• meters for which the voltage line-to-neutral derived from nominal voltages exceeds 1 000 V AC, or 1 500 V DC;
• meters intended for connection with low power instrument transformers (LPITs as defined in the IEC 61869 series of standards) when tested without such transformers;
• metering systems comprising multiple devices (except for LPITs) physically remote from one another;
• portable meters;
• meters used in rolling stock, vehicles, ships and airplanes;
• laboratory and meter test equipment;
• reference standard meters;
• data interfaces to the register of the meter;
• matching sockets or racks used for installation of electricity metering equipment.
This document does not cover measures for the detection and prevention of fraudulent attempts to compromise a meter’s performance (tampering).

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61869-99:2023(Main)
Instrument transformers - Part 99: Glossary (IEC 61869-99:2022)
EN IEC 61869-99:2022

IEC 61869-99:2022 contains the glossary of specific terminology and definitions used in the field of instrument transformers within the various parts of the series. Unless it is otherwise specified, in this document all periodic electrical quantities are understood to be RMS values.

  • Standard
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60404-3:2023(Main)
Magnetic materials - Part 3: Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester (IEC 60404-3:2022)
EN IEC 60404-3:2022

IEC 60404-3:2022 is available as IEC 60404-3:2022 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60404-3:2022 is applicable to grain-oriented and non-oriented electrical steel strip and sheet for measurement of AC magnetic properties at power frequencies. The object of this document is to define the general principles and the technical details of the measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester (SST). This edition includes the following significant technical changes with respect to the previous edition:
- Annex A was revised. The method of determining the yokes’ lamination resistance was added to Annex A;
- Annex B of the consolidated version of 2010 referred to calibration of the SST using the Epstein method. It was cancelled;
- Annex B (new), Annex C and Annex D were revised, they are for information only;
- Annex C was modified taking account of the new situation regarding P and R grades;
- Annex D was amended by addition of Clause D.4 on the numerical air flux compensation.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day