SIST EN 3660-003:2010
(Main)Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 003: Grommet nut, style A for EN 2997 and EN 4067 - Product standard
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 003: Grommet nut, style A for EN 2997 and EN 4067 - Product standard
This product standard defines a range of grommet nuts, style A, for use under the following conditions:
Associated electrical connector(s) : EN 3660-002
Temperature range, Class N : − 65 °C to 200 °C
Class W : − 65 °C to 175 °C
Class K : − 65 °C to 260 °C
Class A : − 65 °C to 200 °C
Luft- und Raumfahrt - Endgehause fur elektrische und optische Rund- und Rechtecksteckverbinder - Teil 003: Dichtungsmutter, Bauform A fur EN 2997 und EN 4067 - Produktnorm
Diese Europäische Norm legt eine Reihe von Dichtungsmuttern, Bauform A, für die Verwendung unter den
folgenden Bedingungen fest:
Zugehörige(r) elektrische(r) Steckverbinder : EN 3660-002
Temperaturreihe, Klasse N : −65 °C bis 200 °C
Klasse W : −65 °C bis 175 °C
Klasse K : −65 °C bis 260 °C
Klasse A : −65 °C bis 200 °C
Série aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires électriques et optiques - Partie 003: Écrou serre-fils, type A pour EN 2997 et EN 4067 - Norme de produit
Aeronavtika - Dodatki za okrogle in pravokotne električne in optične konektorje - 003. del: Tesnilna matica, tip A za EN 2997 in EN 4067 - Standard za proizvod
Ta evropski standard določa nabor tesnilnih matic tipa A, za uporabo pod naslednjimi pogoji: Pripadajoči električni konektorji: EN 3660-002 temperaturni razpon, Razred N : -65 °C do 200 °C Razred W : -65°C do 175°C Razred K : -65°C do 260°C Razred A: -65°C do 200°C.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Endgehause fur elektrische und optische Rund- und Rechtecksteckverbinder - Teil 003: Dichtungsmutter, Bauform A fur EN 2997 und EN 4067 - ProduktnormSérie aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires électriques et optiques - Partie 003: Écrou serre-fils, type A pour EN 2997 et EN 4067 - Norme de produitAerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 003: Grommet nut, style A for EN 2997 and EN 4067 - Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3660-003:2009SIST EN 3660-003:2010en01-januar-2010SIST EN 3660-003:2010SLOVENSKI
STANDARDSIST EN 3660-003:20091DGRPHãþD
SIST EN 3660-003:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3660-003
November 2009 ICS 49.060 Supersedes EN 3660-003:2006English Version
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 003: Grommet nut, style A for EN 2997 and EN 4067 - Product standard
Série aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires électriques et optiques -Partie 003 : Écrou serre-fils, type A pour EN 2997 et EN 4067 - Norme de produit
Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder - Teil 003: Dichtungsmutter, Bauform A für EN 2997 und EN 4067 - Produktnorm This European Standard was approved by CEN on 20 June 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3660-003:2009: ESIST EN 3660-003:2010
EN 3660-003:2009 (E) 2 Contents Page Foreword .31Scope .42Normative references .43Terms and definitions .44Characteristics .45Designation . 116Marking . 117Technical specification . 11 SIST EN 3660-003:2010
EN 3660-003:2009 (E) 3 Foreword This document (EN 3660-003:2009) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2010, and conflicting national standards shall be withdrawn at the latest by May 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 3660-003:2006. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 3660-003:2010
EN 3660-003:2009 (E) 4 1 Scope This European Standard defines a range of grommet nuts, style A, for use under the following conditions: Associated electrical connector(s) : EN 3660-002 Temperature range, Class N : − 65 °C to 200 °C Class W : − 65 °C to 175 °C Class K : − 65 °C to 260 °C Class A : − 65 °C to 200 °C 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2591-100*, Aerospace series
Elements of electrical and optical connection
Test methods
Part 100: General EN 3660-001:2006, Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical connectors — Part 001: Technical specification EN 3660-002, Aerospace series — Cable outlet acces
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.