SIST EN 61784-5-18:2014
(Main)Industrial communication networks - Profiles -- Part 5-18: Installation of fieldbuses - Installation profiles for CPF 18
Industrial communication networks - Profiles -- Part 5-18: Installation of fieldbuses - Installation profiles for CPF 18
This part of IEC 61784-5 specifies the installation profiles for CPF 18 (SafetyNET p). The installation profiles are specified in the annex. This annex is read in conjunction with IEC 61918:2013.
Industrielle Kommunikationsnetze - Profile -- Teil 5-18: Feldbusinstallation - Installationsprofile für die Kommunikationsprofilfamilie 18
Réseaux de communication industriels - Profils -- Partie 5-18: Installation des bus de terrain - Profils d'installation pour CPF 18
La CEI 61784-5-18:2013 définit les profils d'installation pour la CPF 18 (SafetyNET p). Chaque profil d'installation de CP est spécifié dans une partie séparée de la présente série de normes. Cette norme fait partie d'une série élaborée pour faciliter l'utilisation des réseaux de communication dans des systèmes de contrôle-commande industriels. La présente norme doit être utilisée conjointement à la CEI 61918:2013.
Industrijska komunikacijska omrežja - Profili - 5-18. del: Inštalacija procesnih vodil - Inštalacijski profili za CPF 18 (IEC 61784-5-18:2013)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 61784-5-18:2014
01-april-2014
Industrijska komunikacijska omrežja - Profili - 5-18. del: Inštalacija procesnih vodil
- Inštalacijski profili za CPF 18 (IEC 61784-5-18:2013)
Industrial communication networks - Profiles -- Part 5-18: Installation of fieldbuses -
Installation profiles for CPF 18
Industrielle Kommunikationsnetze - Profile -- Teil 5-18: Feldbusinstallation -
Installationsprofile für die Kommunikationsprofilfamilie 18
Réseaux de communication industriels - Profils -- Partie 5-18: Installation des bus de
terrain - Profils d'installation pour CPF 18
Ta slovenski standard je istoveten z: EN 61784-5-18:2013
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.40 Transportni sloj Transport layer
SIST EN 61784-5-18:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 61784-5-18:2014
---------------------- Page: 2 ----------------------
SIST EN 61784-5-18:2014
EUROPEAN STANDARD
EN 61784-5-18
NORME EUROPÉENNE
December 2013
EUROPÄISCHE NORM
ICS 25.040.40; 35.100.40
English version
Industrial communication networks -
Profiles -
Part 5-18: Installation of fieldbuses -
Installation profiles for CPF 18
(IEC 61784-5-18:2013)
Réseaux de communication industriels - Industrielle Kommunikationsnetze -
Profils - Profile -
Partie 5-18: Installation des bus de terrain Teil 5-18: Feldbusinstallation -
- Profils d'installation pour CPF 18 Installationsprofile für die
(CEI 61784-5-18:2013) Kommunikationsprofilfamilie 18
(IEC 61784-5-18:2013)
This European Standard was approved by CENELEC on 2013-10-22. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61784-5-18:2013 E
---------------------- Page: 3 ----------------------
SIST EN 61784-5-18:2014
EN 61784-5-18:2013 - 2 -
Foreword
The text of document 65C/738/FDIS, future edition 1 of IEC 61784-5-18, prepared by
SC 65C "Industrial networks" of IEC/TC 65 "Industrial-process measurement, control and automation"
was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 61784-5-18:2013.
The following dates are fixed:
• latest date by which the document has to be (dop) 2014-07-22
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2016-10-22
• latest date by which the national
standards conflicting with the
document have to be withdrawn
This standard is to be used in conjunction with EN 61918:2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61784-5-18:2013 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61158-3-22 NOTE Harmonized as EN 61158-3-22.
IEC 61158-4-22 NOTE Harmonized as EN 61158-4-22.
IEC 61158-5-22 NOTE Harmonized as EN 61158-5-22.
IEC 61158-6-22 NOTE Harmonized as EN 61158-6-22.
---------------------- Page: 4 ----------------------
SIST EN 61784-5-18:2014
- 3 - EN 61784-5-18:2013
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Annex ZA of EN 61918:2013 applies, except as follows:
Publication Year Title EN/HD Year
Addition to Annex ZA of EN 61918:2013:
IEC 61918 2013 Industrial communication networks - EN 61918 2013
Installation of communication networks in
industrial premises
---------------------- Page: 5 ----------------------
SIST EN 61784-5-18:2014
---------------------- Page: 6 ----------------------
SIST EN 61784-5-18:2014
IEC 61784-5-18
®
Edition 1.0 2013-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Industrial communication networks – Profiles –
Part 5–18: Installation of fieldbuses – Installation profiles for CPF 18
Réseaux de communication industriels – Profils –
Partie 5-18: Installation des bus de terrain – Profils d'installation pour CPF 18
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX U
ICS 25.040.40; 35.100.40 ISBN 978-2-8322-1071-0
Warning! Make sure that you obtained this publication from an authorized distributor.
Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 7 ----------------------
SIST EN 61784-5-18:2014
– 2 – 61784-5-18 © IEC:2013
CONTENTS
FOREWORD . 6
INTRODUCTION . 8
1 Scope . 9
2 Normative references . 9
3 Terms, definitions and abbreviated terms . 9
4 CPF 18: Overview of installation profiles . 9
5 Installation profile conventions . 9
6 Conformance to installation profiles . 10
Annex A (normative) CP 18/1 and CP 18/2 (SafetyNET p) specific installation profile . 11
A.1 Installation profile scope . 11
A.2 Normative references . 11
A.3 Installation profile terms, definitions, and abbreviated terms . 11
A.3.1 Terms and definitions . 11
A.3.2 Abbreviated terms . 11
A.3.3 Conventions for installation profiles . 11
A.4 Installation planning . 11
A.4.1 Général . 11
A.4.1.1 Objective . 11
A.4.1.2 Cabling in industrial premises . 11
A.4.1.3 The planning process . 11
A.4.1.4 Specific requirements for CPs . 11
A.4.1.5 Specific requirements for generic cabling in accordance with ISO/IEC
24702 . 11
A.4.2 Planning requirements . 11
A.4.2.1 Safety . 11
A.4.2.2 Security . 11
A.4.2.3 Environmental considerations and EMC . 12
A.4.2.4 Specific requirements for generic cabling in accordance with
ISO/IEC 24702 . 12
A.4.3 Network capabilities . 12
A.4.3.1 Network topology . 12
A.4.3.2 Network characteristics . 12
A.4.4 Selection and use of cabling components . 14
A.4.4.1 Cable selection . 14
A.4.4.2 Connecting hardware selection . 15
A.4.4.3 Connections within a channel/permanent link . 16
A.4.4.4 Terminators . 17
A.4.4.5 Device location and connection . 17
A.4.4.6 Coding and labelling . 17
A.4.4.7 Earthing and bonding of equipment and devices and shielded
cabling . 18
A.4.4.8 Storage and transportation of cables . 18
A.4.4.9 Routing of cables . 19
A.4.4.10 Separation of circuit . 19
A.4.4.11 Mechanical protection of cabling components . 19
---------------------- Page: 8 ----------------------
SIST EN 61784-5-18:2014
61784-5-18 © IEC:2013 – 3 –
A.4.4.12 Installation in special areas . 19
A.4.5 Cabling planning documentation . 19
A.4.5.1 Common description . 19
A.4.5.2 Cabling planning documentation for CPs . 19
A.4.5.3 Network certification documentation . 19
A.4.5.4 Cabling planning documentation for generic cabling in accordance
with ISO/IEC 24702 . 19
A.4.6 Verification of cabling planning specification . 19
A.5 Installation implementation . 19
A.5.1 General requirements . 19
A.5.1.1 Common description . 19
A.5.1.2 Installation of CPs . 19
A.5.1.3 Installation of generic cabling in industrial premises . 19
A.5.2 Cable installation . 20
A.5.2.1 General requirements for all cabling types . 20
A.5.2.2 Installation and routing . 21
A.5.2.3 Specific requirements for CPs . 21
A.5.2.4 Specific requirements for wireless installation . 21
A.5.2.5 Specific requirements for generic cabling in accordance with
ISO/IEC 24702 . 21
A.5.3 Connector installation . 22
A.5.3.1 Common description . 22
A.5.3.2 Shielded connectors . 22
A.5.3.3 Unshielded connectors . 22
A.5.3.4 Specific requirements for CPs . 22
A.5.3.5 Specific requirements for generic cabling in accordance with ISO/IEC
24702 . 22
A.5.4 Terminator installation . 22
A.5.5 Device installation . 22
A.5.5.1 Common description . 22
A.5.5.2 Specific requirements for CPs . 22
A.5.6 Coding and labelling . 22
A.5.6.1 Common description . 22
A.5.6.2 Specific requirements for CPs . 22
A.5.7 Earthing and bonding of equipment and devices and shield cabling . 22
A.5.7.1 Common description . 22
A.5.7.2 Bonding and earthing of enclosures and pathways . 22
A.5.7.3 Earthing methods . 22
A.5.7.4 Shield termination methods . 22
A.5.7.5 Specific requirements for CPs . 23
A.5.7.6 Specific requirements for generic cabling in accordance with ISO/IEC
24702 . 23
A.5.8 As-implemented cabling documentation . 23
A.6 Installation verification and installation acceptance test . 23
A.6.1 General . 23
A.6.2 Installation verification . 23
A.6.2.1 General . 23
A.6.2.2 Verification according to cabling planning documentation . 23
A.6.2.3 Verification of earthing and bonding . 23
A.6.2.4 Verification of shield earthing . 23
---------------------- Page: 9 ----------------------
SIST EN 61784-5-18:2014
– 4 – 61784-5-18 © IEC:2013
A.6.2.5 Verification of cabling system . 23
A.6.2.6 Cable selection verification . 23
A.6.2.7 Connector verification . 23
A.6.2.8 Connection verification . 23
A.6.2.9 Terminators verification . 24
A.6.2.10 Coding and labelling verification . 24
A.6.2.11 Verification report . 24
A.6.3 Installation acceptance test . 24
A.6.3.1 General . 24
A.6.3.2 Acceptance test of Ethernet-based cabling . 24
A.6.3.3 Acceptance test of non-Ethernet-based cabling . 24
A.6.3.4 Specific requirements for wireless installation . 24
A.6.3.5 Acceptance test report . 24
A.7 Installation administration . 25
A.7.1 General . 25
A.7.2 Fields covered by the administration . 25
A.7.3 Basic principles for the administration system . 25
A.7.4 Working procedures . 25
A.7.5 Device location labelling . 25
A.7.6 Component cabling labelling . 25
A.7.7 Documentation . 25
A.7.8 Specific requirements for administration . 25
A.8 Installation maintenance and installation troubleshooting . 25
A.8.1 General . 25
A.8.2 Maintenance . 25
A.8.2.1 Scheduled maintenance . 25
A.8.2.2 Condition-based maintenance . 25
A.8.2.3 Corrective maintenance . 25
A.8.3 Troubleshooting . 25
A.8.3.1 General description . 25
A.8.3.2 Evaluation of the problem . 25
A.8.3.3 Typical problems . 25
A.8.3.4 Troubleshooting procedure . 25
A.8.3.5 Simplified troubleshooting procedure . 25
A.8.4 Specific requirements for maintenance and troubleshooting . 25
Bibliography . 26
Figure 1 – Standards relationships . 8
Table A.1 – Network characteristics for balanced cabling based on Ethernet . 13
Table A.2 – Network characteristics for optical fibre cabling . 13
Table A.3 – Information relevant to copper cable: fixed cables . 14
Table A.4 – Information relevant to copper cable: cords . 14
Table A.5 – Information relevant to optical fibre cables . 15
Table A.6 – Connectors for balanced cabling CPs based on Ethernet . 15
Table A.7 – Optical fibre connecting hardware . 16
Table A.8 – Relationship between FOC and fibre types (CP 18/1 and CP 18/2) . 16
Table A.9 – Parameters for balanced cables . 20
---------------------- Page: 10 ----------------------
SIST EN 61784-5-18:2014
61784-5-18 © IEC:2013 – 5 –
Table A.10 – Parameters for silica optical fibre cables . 20
Table A.11 – Parameters for POF optical fibre cables . 20
Table A.12 – Parameters for hard clad silica optical fibre cables . 21
---------------------- Page: 11 ----------------------
SIST EN 61784-5-18:2014
– 6 – 61784-5-18 © IEC:2013
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
INDUSTRIAL COMMUNICATION NETWORKS –
PROFILES –
Part 5–18: Installation of fieldbuses –
Installation profiles for CPF 18
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61784-5-18 has been prepared by subcommittee 65C: Industrial
networks, of IEC technical committee 65: Industrial-process measurement, control and
automation.
This standard is to be used in conjunction with IEC 61918:2013.
The text of this standard is based on the following documents:
FDIS Report on voting
65C/738/FDIS 65C/743/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
---------------------- Page: 12 ----------------------
SIST EN 61784-5-18:2014
61784-5-18 © IEC:2013 – 7 –
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of the IEC 61784-5 series, published under the general title Industrial
communication networks – Profiles – Installation of fieldbuses, can be found on the IEC
website.
The committee has decided that the contents of this publication will remain unchanged until
the maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in
the data related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.
---------------------- Page: 13 ----------------------
SIST EN 61784-5-18:2014
– 8 – 61784-5-18 © IEC:2013
INTRODUCTION
This International Standard is one of a series produced to facilitate the use of communication
networks in industrial control systems.
IEC 61918:2013 provides the common requirements for the installation of communication
networks in industrial control systems. This installation profile standard provides the
installation profiles of the communication profiles (CP) of a specific communication profile
family (CPF) by stating which requirements of IEC 61918 fully apply and, where necessary, by
supplementing, modifying, or replacing the other requirements (see Figure 1).
For general background on fieldbuses, their profiles, and relationship between the installation
profiles specified in this standard, see IEC 61158-1.
Each CP installation profile is specified in a separate annex of this standard. Each annex is
structured exactly as the reference standard IEC 61918 for the benefit of the persons
representing the roles in the fieldbus installation process as defined in IEC 61918 (planner,
installer, verification personnel, validation personnel, maintenance personnel, administration
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.