SIST EN 16867:2020/oprA1:2021

Building hardware - Mechatronic door furniture - Requirements and test methods

1.1   General
This document applies to Mechatronic door furniture (MDF) fitted on the door set which gives the possibility to control the locking and/or release part through an electronic authorization means. This can be operable by credentials (i.e. card, code, biometric).
The MDF according to this document is combined with locks according to EN 12209, EN 14846, prEN 15685 or may be a part of an emergency exit device according to EN 179, EN 1125 or EN 13637.
The MDF may be standalone or linkable to an external control system.
The document would allow classifying the MDF upon several characteristics such as category of use, durability, environmental, security, and type of operating device.
The suitability of the MDF for use on fire or smoke-door assemblies is determined by fire resistance tests conducted in addition to the performance testing specified by this document.
1.2   Exclusions
This document does not cover:
-   mechatronic cylinders according to EN 15684;
-   electromechanical operated locks and striking plates according to EN 14846.

Schlösser und Baubeschläge - Mechatronische Türbeschläge - Anforderungen und Prüfverfahren

Quincaillerie pour le bâtiment - Poignée de porte mécatronique - Exigences et méthodes d'essai

Stavbno okovje - Mehatronsko okovje za vrata - Zahteve in preskusne metode

General Information

• Status: Not Published
• Public Enquiry End Date: 24-Apr-2021
• ICS: 91.190 - Building accessories
• Technical Committee: ISTP - Doors and windows
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 09-Dec-2021
• Due Date: 14-Dec-2021
• Completion Date: 09-Dec-2021
• Ref Project: EN 16867:2020/prA1 - Building hardware - Mechatronic door furniture - Requirements and test methods

Relations

• Consolidated By: SIST EN 16867:2020+A1:2022 - Building hardware - Mechatronic door furniture - Requirements and test methods
• Effective Date: 18-Jan-2023
• Consolidated By: SIST EN 16867:2020+A1:2022 - Building hardware - Mechatronic door furniture - Requirements and test methods
• Effective Date: 19-Jan-2023
• Amends: SIST EN 16867:2020 - Building hardware - Mechatronic door furniture - Requirements and test methods
• Effective Date: 01-Apr-2021
• Consolidated By: SIST EN 16867:2020+A1:2022 - Building hardware - Mechatronic door furniture - Requirements and test methods
• Effective Date: 01-Jan-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 16867:2020/oprA1:2021
01-april-2021
Stavbno okovje - Mehatronsko okovje za vrata - Zahteve in preskusne metode
Building hardware - Mechatronic door furniture - Requirements and test methods
Schlösser und Baubeschläge - Mechatronische Türbeschläge - Anforderungen und
Prüfverfahren
Quincaillerie pour le bâtiment - Poignée de porte mécatronique - Exigences et méthodes
d'essai
Ta slovenski standard je istoveten z: EN 16867:2020/prA1
ICS:
91.190 Stavbna oprema Building accessories
SIST EN 16867:2020/oprA1:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 16867:2020/oprA1:2021

---------------------- Page: 2 ----------------------
SIST EN 16867:2020/oprA1:2021


DRAFT
EUROPEAN STANDARD
EN 16867:2020
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA1
February 2021
ICS 91.190
English Version

Building hardware - Mechatronic door furniture -
Requirements and test methods
Quincaillerie pour le bâtiment - Poignée de porte Schlösser und Baubeschläge - Mechatronische
mécatronique - Exigences et méthodes d'essai Türbeschläge - Anforderungen und Prüfverfahren
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 33.

This draft amendment A1, if approved, will modify the European Standard EN 16867:2020. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 16867:2020/prA1:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 16867:2020/oprA1:2021
EN 16867:2020/prA1:2021 (E)
Contents Page
European foreword .
...