SIST EN 61158-6-23:2015
(Main)Industrial communication networks - Fieldbus specifications - Part 6-23: Application layer protocol specification - Type 23 elements (IEC 61158-6-23:2014)
Industrial communication networks - Fieldbus specifications - Part 6-23: Application layer protocol specification - Type 23 elements (IEC 61158-6-23:2014)
IEC 61158-6-23:2014 defines the protocol provided to define the wire-representation of the service primitives defined in IEC 61158-5-23, and define the externally visible behaviour associated with their transfer. This standard specifies the protocol of the IEC fieldbus Application Layer, in conformance with the OSI Basic Reference Model (ISO/IEC 7498-1) and the OSI application layer structure (ISO/IEC 9545).
Industrielle Kommunikationsnetze - Feldbusse - Teil 6-23: Protokollspezifikation des Application Layer (Anwendungsschicht) - Typ 23-Elemente (IEC 61158-6-23:2014)
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 6-23: Spécification du protocole de la couche application - Eléments de type 23 (CEI 61158-6-23:2014)
L'IEC 61158-6-23:2014 décrit le protocole mis en place pour définir la représentation filaire des primitives de service définies dans la CEI 61158-5-23 et définir le comportement visible de l'extérieur associé à leur transfert. La présente norme spécifie le protocole de la couche application de bus de terrain de l'IEC, en conformité avec le modèle de référence de base OSI (ISO/CEI 7498-1) et la structure de la couche application OSI (ISO/CEI 9545).
Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 6-23. del: Specifikacija protokola na aplikacijski ravni - Elementi tipa 23 (IEC 61158-6-23:2014)
Namen standarda IEC 61158-6-23:2014 je opredeliti protokol za določitev žične predstavitve primitivov opravil iz standarda IEC 61158-5-23 in določitev zunanje vidnega vedenja, povezanega z njihovim prenosom. Ta standard določa protokol aplikacijskega nivoja procesnih vodil IEC v skladu z osnovnim referenčnim modelom OSI (ISO/IEC 7498-1) in strukturo aplikacijskega nivoja OSI (ISO/IEC 9545).
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 61158-6-23:2015
01-marec-2015
Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 6-23. del:
Specifikacija protokola na aplikacijski ravni - Elementi tipa 23 (IEC 61158-6-
23:2014)
Industrial communication networks - Fieldbus specifications - Part 6-23: Application layer
protocol specification - Type 23 elements (IEC 61158-6-23:2014)
Industrielle Kommunikationsnetze - Feldbusse - Teil 6-23: Protokollspezifikation des
Application Layer (Anwendungsschicht) - Typ 23-Elemente (IEC 61158-6-23:2014)
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 6-23:
Spécification du protocole de la couche application - Eléments de type 23 (CEI 61158-6-
23:2014)
Ta slovenski standard je istoveten z: EN 61158-6-23:2014
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.70 Uporabniški sloj Application layer
35.110 Omreževanje Networking
SIST EN 61158-6-23:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 61158-6-23:2015
---------------------- Page: 2 ----------------------
SIST EN 61158-6-23:2015
EUROPEAN STANDARD EN 61158-6-23
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2014
ICS 25.040.40; 35.100.70; 35.110
English Version
Industrial communication networks - Fieldbus specifications -
Part 6-23: Application layer protocol specification - Type 23
elements
(IEC 61158-6-23:2014)
Réseaux de communication industriels - Spécifications des Industrielle Kommunikationsnetze - Feldbusse - Teil 6-23:
bus de terrain - Partie 6-23: Spécification du protocole de la Protokollspezifikation des Application Layer
couche application - Eléments de type 23 (Anwendungsschicht) - Typ 23-Elemente
(CEI 61158-6-23:2014) (IEC 61158-6-23:2014)
This European Standard was approved by CENELEC on 2014-09-23. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61158-6-23:2014 E
---------------------- Page: 3 ----------------------
SIST EN 61158-6-23:2015
EN 61158-6-23:2014 - 2 -
Foreword
The text of document 65C/764/FDIS, future edition 1 of IEC 61158-6-23, prepared by SC 65C
"Industrial networks" of IEC/TC 65 "Industrial-process measurement, control and automation" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61158-6-23:2014.
The following dates are fixed:
(dop) 2015-06-23
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2017-09-23
• latest date by which the national standards conflicting with
the document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association.
Endorsement notice
The text of the International Standard IEC 61158-6-23:2014 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61784-1 NOTE Harmonized as EN 61784-1.
IEC 61784-2 NOTE Harmonized as EN 61784-2.
---------------------- Page: 4 ----------------------
SIST EN 61158-6-23:2015
- 3 - EN 61158-6-23:2014
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 61158-1 2014 Industrial communication networks - EN 61158-1 2014
Fieldbus specifications -
Part 1: Overview and guidance for the
IEC 61158 and IEC 61784 series
IEC 61158-5-23 - Industrial communication networks - EN 61158-5-23 -
Fieldbus specifications -
Part 5-23: Application layer service
definition – Type 23 elements
IEC 61158-6 series Industrial communication networks - EN 61158-6 series
Fieldbus specifications -
Part 6: Application layer protocol
specification
ISO/IEC 7498-1 - Information technology - Open Systems - -
Interconnection - Basic Reference Model:
The Basic Model
ISO/IEC 8824-1 - Information technology - Abstract Syntax - -
Notation One (ASN.1): Specification of
basic notation
ISO/IEC 9545 - Information technology - Open Systems - -
Interconnection - Application layer structure
ISO/IEC 10731 - Information technology - Open Systems - -
Interconnection - Basic Reference Model -
Conventions for the definition of OSI
services
---------------------- Page: 5 ----------------------
SIST EN 61158-6-23:2015
---------------------- Page: 6 ----------------------
SIST EN 61158-6-23:2015
IEC 61158-6-23
®
Edition 1.0 2014-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Industrial communication networks – Fieldbus specifications –
Part 6-23: Application layer protocol specification – Type 23 elements
Réseaux de communication industriels – Spécifications des bus de terrain –
Partie 6-23: Spécification du protocole de la couche application – Éléments
de type 23
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX XH
ICS 25.040.40; 35.100.70; 35.110 ISBN 978-2-8322-1768-9
Warning! Make sure that you obtained this publication from an authorized distributor.
Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 7 ----------------------
SIST EN 61158-6-23:2015
– 2 – IEC 61158-6-23:2014 © IEC 2014
CONTENTS
FOREWORD . 7
0 INTRODUCTION . 9
0.1 General . 9
0.2 Patent disclosure . 9
1 Scope . 11
1.1 General . 11
1.2 Specifications . 12
1.3 Conformance . 12
2 Normative references . 12
3 Terms, definitions, symbols, abbreviated terms and conventions . 12
3.1 Referenced terms and definitions . 13
3.2 Type 23 specific terms and definitions . 14
3.3 Symbols and abbreviated terms. 16
3.4 Conventions . 17
4 FAL syntax description . 19
4.1 FALPDU type C abstract syntax . 19
4.2 FALPDU type F abstract syntax . 25
4.3 Data type assignments for type C . 36
4.4 Data type assignments for type F . 37
5 FAL transfer syntax . 38
5.1 Encoding rules . 38
5.2 FALPDU type C elements encoding . 38
5.3 FALPDU type F elements encoding . 68
6 Structure of the FAL protocol state machine . 102
7 FAL service protocol machine (FSPM) . 102
7.1 Overview . 102
7.2 FSPM type C . 103
7.3 FSPM type F . 106
8 Application relationship protocol machine (ARPM) . 113
8.1 ARPM type C. 113
8.2 ARPM type F . 159
9 DLL mapping protocol machine (DMPM) . 211
9.1 DMPM type C . 211
9.2 DMPM type F . 212
Bibliography . 213
Figure 1 – Bit description in octets . 18
Figure 2 – Structure for memory access information retrieve response . 55
Figure 3 – Attribute definitions . 56
Figure 4 – Access code definitions . 56
Figure 5 – Structure for RUN request . 57
Figure 6 – Structure for RUN response . 58
Figure 7 – Structure for STOP request . 58
Figure 8 – Structure for STOP response . 58
---------------------- Page: 8 ----------------------
SIST EN 61158-6-23:2015
IEC 61158-6-23:2014 © IEC 2014 – 3 –
Figure 9 – Structure for batch memory read request . 59
Figure 10 – Structure for batch memory read response . 59
Figure 11 – Structure for random memory read request . 60
Figure 12 – Structure for random memory read response . 60
Figure 13 – Structure for batch memory write request . 61
Figure 14 – Structure for batch memory write response . 61
Figure 15 – Structure for random memory write request . 62
Figure 16 – Structure for random memory write response . 62
Figure 17 – Relationships between protocol machines . 102
Figure 18 – Structure of FSPM C . 103
Figure 19 – Structure of FSPM F . 106
Figure 20 – Structure of ARPM C . 113
Figure 21 – Structure of ARPM F . 160
Figure 22 – Structure of type C DMPM . 211
Figure 23 – Structure of type F DMPM . 212
Table 1 – State machine description elements . 18
Table 2 – Description of state machine elements . 18
Table 3 – Conventions used in state machines . 18
Table 4 – afFType . 38
Table 5 – priority . 39
Table 6 – portChoice . 41
Table 7 – portCheckResult . 41
Table 8 – dstPortInfo . 41
Table 9 – scanState . 42
Table 10 – nodeType . 42
Table 11 – loopState . 43
Table 12 – Cyclic status . 43
Table 13 – Parameter setting mode . 44
Table 14 – opState . 46
Table 15 – errorState . 47
Table 16 – Data type . 48
Table 17 – CPW . 49
Table 18 – CPWC . 49
Table 19 – CPWCR . 49
Table 20 – cmParam . 49
Table 21 – Details of param area . 50
Table 22 – Details of application parameters . 50
Table 23 – Details of LB/LW CM area and LB/LW CM additional area . 51
Table 24 – Details of LX/LY CM 1 area and LX/LY CM 2 area . 51
Table 25 – Destination module flag . 53
Table 26 – Command types . 54
Table 27 – Access codes of network module memory . 56
---------------------- Page: 9 ----------------------
SIST EN 61158-6-23:2015
– 4 – IEC 61158-6-23:2014 © IEC 2014
Table 28 – Access codes of controller memory . 56
Table 29 – byteValidity . 63
Table 30 – afFType . 68
Table 31 – dataType . 69
Table 32 – varField . 69
Table 33 – nodeType . 70
Table 34 – ProtocolVerType . 71
Table 35 – Link status . 74
Table 36 – Port enable/disable specification . 75
Table 37 – Cyclic transmission parameter hold status . 82
Table 38 – Detailed application operation status . 82
Table 39 – Error detection status . 82
Table 40 – Slave-specific event reception status . 84
Table 41 – dataSupType of dataType (0x07) . 86
Table 42 – FieldSpecificTransient opHeader . 87
Table 43 – command (dataType: 0x07, dataSubType: 0x0002) . 87
Table 44 – subCommand type for each command type . 88
Table 45 – Strucure of Deliver node informantion. 88
Table 46 – Strucure of Deliver node informantion – message . 88
Table 47 – Strucure of Get statistical informantion response . 89
Table 48 – Strucure of Acquisition of node details response . 89
Table 49 – Execution module specification . 92
Table 50 – Command type . 93
Table 51 – Cyclic data state table . 104
Table 52 – Acyclic data state table . 104
Table 53 – Management state table . 106
Table 54 – Cyclic data state table . 109
Table 55 – Acyclic data state table . 109
Table 56 – Management state table . 112
Table 57 – Synchronization state table . 112
Table 58 – Measurement state table . 112
Table 59 – Acyclic transmission state table . 113
Table 60 – Acyclic transmission functions . 114
Table 61 – Cyclic transmission state table . 115
Table 62 – Cyclic transmission functions . 119
Table 63 – Connection control state machine – Initial . 120
Table 64 – Connection control state machine – Connect . 120
Table 65 – Connection control state machine – Scan . 122
Table 66 – Connection control state machine – ScanWait . 125
Table 67 – Connection control state machine – Collect . 127
Table 68 – Connection control state machine – CollectWait . 130
Table 69 – Connection control state machine – Select . 133
Table 70 – Connection control state machine – TokenStartWait . 136
---------------------- Page: 10 ----------------------
SIST EN 61158-6-23:2015
IEC 61158-6-23:2014 © IEC 2014 – 5 –
Table 71 – Connection control state machine – LaunchWait. 138
Table 72 – Connection control state machine – TokenReleaseWait . 141
Table 73 – Connection control state machine – TokenReleased . 144
Table 74 – Connection control state machine – TokenWait . 149
Table 75 – Connection control state machine – NTNTestMaster . 153
Table 76 – Connection control state machine – NTNTestSlave . 154
Table 77 – Function list of connection control . 154
Table 78 – Common parameter dist state table . 154
Table 79 – Function list of connection control . 158
Table 80 – Mapping of internal service and acyclic transmission service . 159
Table 81 – Acyclic transmission states . 160
Table 82 – Acyclic transmission state table . 160
Table 83 – Acyclic transmission functions . 162
Table 84 – Acyclic transmission variables . 162
Table 85 – Cyclic transmission states . 163
Table 86 – Cyclic transmission state table . 163
Table 87 – Cyclic transmission functions . 165
Table 88 – Cyclic transmission variables . 165
Table 89 – Master station channel control states . 165
Table 90 – Slave station channel control states . 166
Table 91 – Master station state table – MasterDown . 166
Table 92 – Master station state table – Listen . 166
Table 93 – Master station state table – MasterArbitration . 168
Table 94 – Master station state table – PrimaryMasterScatterTD . 169
Table 95 – Master station state table – PrimaryMasterSettingUp. 171
Table 96 – Master station state table – PrimaryMasterHoldToken . 173
Table 97 – Master station state table – PrimaryMasterSolicitToken . 176
Table 98 – Master station state table – PrimaryMasterInviting . 179
Table 99 – Master station state table – MasterWaitTD . 180
Table 100 – Master station state table – MasterWaitSetup . 182
Table 101 – Master station state table – MasterSolictToken (without Transmission path
delay measurement) . 183
Table 102 – Master station state table – MasterSolictToken (with Transmission path
delay measurement) . 185
Table 103 – Master station state table – MasterHoldToken . 187
Table 104 – Master station state table – MasterMeasurement (without Transmission
path delay measurement function) . 189
Table 105 – Master station state table – MasterMeasurement (with Transmission path
delay measurement function) . 190
Table 106 – Slave station state table – SlaveDown . 190
Table 107 – Slave station state table – SlaveWaitTD . 190
Table 108 – Slave station state table – SlaveWaitSetup . 191
Table 109 – Slave station state table – SlaveSolicitToken (without Transmission path
delay measurement) . 192
---------------------- Page: 11 ----------------------
SIST EN 61158-6-23:2015
– 6 – IEC 61158-6-23:2014 © IEC 2014
Table 110 – Slave station state table – SlaveSolicitToken (with Transmission path
delay measurement) . 194
Table 111 – Slave station state table – SlaveHoldToken . 195
Table 112 – Master station channel control functions . 198
Table 113 – Slave station channel control functions . 199
Table 114 – Master station channel control variables .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.