EN 61158-6-23:2014
(Main)Industrial communication networks - Fieldbus specifications - Part 6-23: Application layer protocol specification - Type 23 elements
Industrial communication networks - Fieldbus specifications - Part 6-23: Application layer protocol specification - Type 23 elements
IEC 61158-6-23:2014 defines the protocol provided to define the wire-representation of the service primitives defined in IEC 61158-5-23, and define the externally visible behaviour associated with their transfer. This standard specifies the protocol of the IEC fieldbus Application Layer, in conformance with the OSI Basic Reference Model (ISO/IEC 7498-1) and the OSI application layer structure (ISO/IEC 9545).
Industrielle Kommunikationsnetze - Feldbusse - Teil 6-23: Protokollspezifikation des Application Layer (Anwendungsschicht) - Typ 23-Elemente
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 6-23: Spécification du protocole de la couche application - Eléments de type 23
L'IEC 61158-6-23:2014 décrit le protocole mis en place pour définir la représentation filaire des primitives de service définies dans la CEI 61158-5-23 et définir le comportement visible de l'extérieur associé à leur transfert. La présente norme spécifie le protocole de la couche application de bus de terrain de l'IEC, en conformité avec le modèle de référence de base OSI (ISO/CEI 7498-1) et la structure de la couche application OSI (ISO/CEI 9545).
Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 6-23. del: Specifikacija protokola na aplikacijski ravni - Elementi tipa 23 (IEC 61158-6-23:2014)
Namen standarda IEC 61158-6-23:2014 je opredeliti protokol za določitev žične predstavitve primitivov opravil iz standarda IEC 61158-5-23 in določitev zunanje vidnega vedenja, povezanega z njihovim prenosom. Ta standard določa protokol aplikacijskega nivoja procesnih vodil IEC v skladu z osnovnim referenčnim modelom OSI (ISO/IEC 7498-1) in strukturo aplikacijskega nivoja OSI (ISO/IEC 9545).
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2015
Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 6-23. del:
Specifikacija protokola na aplikacijski ravni - Elementi tipa 23 (IEC 61158-6-
23:2014)
Industrial communication networks - Fieldbus specifications - Part 6-23: Application layer
protocol specification - Type 23 elements (IEC 61158-6-23:2014)
Industrielle Kommunikationsnetze - Feldbusse - Teil 6-23: Protokollspezifikation des
Application Layer (Anwendungsschicht) - Typ 23-Elemente (IEC 61158-6-23:2014)
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 6-23:
Spécification du protocole de la couche application - Eléments de type 23 (CEI 61158-6-
23:2014)
Ta slovenski standard je istoveten z: EN 61158-6-23:2014
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.70 Uporabniški sloj Application layer
35.110 Omreževanje Networking
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 61158-6-23
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2014
ICS 25.040.40; 35.100.70; 35.110
English Version
Industrial communication networks - Fieldbus specifications -
Part 6-23: Application layer protocol specification - Type 23
elements
(IEC 61158-6-23:2014)
Réseaux de communication industriels - Spécifications des Industrielle Kommunikationsnetze - Feldbusse - Teil 6-23:
bus de terrain - Partie 6-23: Spécification du protocole de la Protokollspezifikation des Application Layer
couche application - Eléments de type 23 (Anwendungsschicht) - Typ 23-Elemente
(CEI 61158-6-23:2014) (IEC 61158-6-23:2014)
This European Standard was approved by CENELEC on 2014-09-23. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61158-6-23:2014 E
Foreword
The text of document 65C/764/FDIS, future edition 1 of IEC 61158-6-23, prepared by SC 65C
"Industrial networks" of IEC/TC 65 "Industrial-process measurement, control and automation" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61158-6-23:2014.
The following dates are fixed:
(dop) 2015-06-23
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2017-09-23
• latest date by which the national standards conflicting with
the document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association.
Endorsement notice
The text of the International Standard IEC 61158-6-23:2014 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61784-1 NOTE Harmonized as EN 61784-1.
IEC 61784-2 NOTE Harmonized as EN 61784-2.
- 3 - EN 61158-6-23:2014
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 61158-1 2014 Industrial communication networks - EN 61158-1 2014
Fieldbus specifications -
Part 1: Overview and guidance for the
IEC 61158 and IEC 61784 series
IEC 61158-5-23 - Industrial communication networks - EN 61158-5-23 -
Fieldbus specifications -
Part 5-23: Application layer service
definition – Type 23 elements
IEC 61158-6 series Industrial communication networks - EN 61158-6 series
Fieldbus specifications -
Part 6: Application layer protocol
specification
ISO/IEC 7498-1 - Information technology - Open Systems - -
Interconnection - Basic Reference Model:
The Basic Model
ISO/IEC 8824-1 - Information technology - Abstract Syntax - -
Notation One (ASN.1): Specification of
basic notation
ISO/IEC 9545 - Information technology - Open Systems - -
Interconnection - Application layer structure
ISO/IEC 10731 - Information technology - Open Systems - -
Interconnection - Basic Reference Model -
Conventions for the definition of OSI
services
IEC 61158-6-23 ®
Edition 1.0 2014-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Industrial communication networks – Fieldbus specifications –
Part 6-23: Application layer protocol specification – Type 23 elements
Réseaux de communication industriels – Spécifications des bus de terrain –
Partie 6-23: Spécification du protocole de la couche application – Éléments
de type 23
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX XH
ICS 25.040.40; 35.100.70; 35.110 ISBN 978-2-8322-1768-9
– 2 – IEC 61158-6-23:2014 © IEC 2014
CONTENTS
FOREWORD . 7
0 INTRODUCTION . 9
0.1 General . 9
0.2 Patent disclosure . 9
1 Scope . 11
1.1 General . 11
1.2 Specifications . 12
1.3 Conformance . 12
2 Normative references . 12
3 Terms, definitions, symbols, abbreviated terms and conventions . 12
3.1 Referenced terms and definitions . 13
3.2 Type 23 specific terms and definitions . 14
3.3 Symbols and abbreviated terms. 16
3.4 Conventions . 17
4 FAL syntax description . 19
4.1 FALPDU type C abstract syntax . 19
4.2 FALPDU type F abstract syntax . 25
4.3 Data type assignments for type C . 36
4.4 Data type assignments for type F . 37
5 FAL transfer syntax . 38
5.1 Encoding rules . 38
5.2 FALPDU type C elements encoding . 38
5.3 FALPDU type F elements encoding . 68
6 Structure of the FAL protocol state machine . 102
7 FAL service protocol machine (FSPM) . 102
7.1 Overview . 102
7.2 FSPM type C . 103
7.3 FSPM type F . 106
8 Application relationship protocol machine (ARPM) . 113
8.1 ARPM type C. 113
8.2 ARPM type F . 159
9 DLL mapping protocol machine (DMPM) . 211
9.1 DMPM type C . 211
9.2 DMPM type F . 212
Bibliography . 213
Figure 1 – Bit description in octets . 18
Figure 2 – Structure for memory access information retrieve response . 55
Figure 3 – Attribute definitions . 56
Figure 4 – Access code definitions . 56
Figure 5 – Structure for RUN request . 57
Figure 6 – Structure for RUN response . 58
Figure 7 – Structure for STOP request . 58
Figure 8 – Structure for STOP response . 58
IEC 61158-6-23:2014 © IEC 2014 – 3 –
Figure 9 – Structure for batch memory read request . 59
Figure 10 – Structure for batch memory read response . 59
Figure 11 – Structure for random memory read request . 60
Figure 12 – Structure for random memory read response . 60
Figure 13 – Structure for batch memory write request . 61
Figure 14 – Structure for batch memory write response . 61
Figure 15 – Structure for random memory write request . 62
Figure 16 – Structure for random memory write response . 62
Figure 17 – Relationships between protocol machines . 102
Figure 18 – Structure of FSPM C . 103
Figure 19 – Structure of FSPM F . 106
Figure 20 – Structure of ARPM C . 113
Figure 21 – Structure of ARPM F .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.