SIST ES 202 504-13 V1.1.1:2008
Open Service Access (OSA) - Parlay X Web Services - Part 13: Address List Management (Parlay X 3)
- Abstract
New edition of ParlayX specification based on requirements in EG 201 988-4, corresponding to 3GPP TS 29.199 Rel-7.The present document is part 13 of the Stage 3 Parlay X 3 Web Services specification for Open Service Access (OSA).
The OSA specifications define an architecture that enables application developers to make use of network functionality through an open standardized interface, i.e. the OSA APIs.
The present document specifies the Address List Management Web Service. The following are defined here:
• Name spaces.
• Sequence diagrams.
• Data definitions.
• Interface specification plus detailed method descriptions.
• Fault definitions.
• Service Policies.
• WSDL Description of the interfaces.
- Status
- Published
- Publication Date
- 02-Jul-2008
- Technical Committee
- SPN - Services and Protocols for Networks
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 12-Jun-2008
- Due Date
- 17-Aug-2008
- Completion Date
- 03-Jul-2008
Buy Documents
ETSI ES 202 504-13 V1.1.1 (2008-02) - Open Service Access (OSA); Parlay X Web Services; Part 13: Address List Management (Parlay X 3)
ETSI ES 202 504-13 V1.1.1 (2008-05) - Open Service Access (OSA); Parlay X Web Services; Part 13: Address List Management (Parlay X 3)
SIST ES 202 504-13 V1.1.1:2008 is the ETSI Standard for Open Service Access (OSA) Parlay X Web Services, Part 13: Address List Management. It specifies the Web Service used to create and manage groups of addresses, group members, and access rights through OSA APIs. It is aimed at application developers, service providers, and operators who need a standardized way to expose address list functions.
What does SIST ES 202 504-13 V1.1.1:2008 specify?
SIST ES 202 504-13 V1.1.1:2008 specifies the Address List Management Web Service for Parlay X 3. The service lets applications manage groups that contain address lists, and then use those groups in other services through a common OSA interface.
The document says addresses are not created by this service - they must already exist. It also defines the naming style for group URIs, the service namespaces, sequence diagrams, XML Schema data types, interface and method descriptions, fault definitions, service policies, and the WSDL.
The document is organized into clauses for scope, references, definitions and abbreviations, detailed service description, namespaces, sequence diagrams, XML Schema data type definition, Web Service interface definition, fault definitions, and service policies.
| Annex | What it covers |
|---|---|
| Annex A | Normative WSDL for Address List Management |
| Annex B | Informative bibliography |
What are the key requirements of SIST ES 202 504-13 V1.1.1:2008?
SIST ES 202 504-13 V1.1.1:2008 centers on three interfaces: GroupManagement, Group, and Member. In practice, that means one interface controls group administration, one controls members inside a group, and one handles attributes for an individual member.
Group naming and lookup
Clause 4.1 defines the group URI style using RFC 2396 syntax. The requester provides the group name and a domain segment, while the service provider supplies the domain; a suffix may be added when auto-naming is allowed and a unique name is needed. This matters because group names must be unique, and systems integrating with the service need to handle provider-controlled naming.
Clause 8.1.1 describes createGroup. If autoName is false and the name is not unique, the service raises a PolicyException. If autoName is true, the service can add a suffix and return the qualified group name. Clause 8.1.3 describes queryGroups, which can search a single sub-domain or include sub-domains when hierarchy is true.
Access control
Clause 8.1.4 defines setAccess and clause 8.1.5 defines queryAccess. Access rights are set per requester and per group, with separate permissions for admin, add, delete, and query actions. The document states that these rights are absolute, so setting a permission to false revokes it rather than leaving earlier rights in place. In practice, administrators need to assign the full permission set they want, not just changes.
Membership management
Clause 8.2.1 and clause 8.2.2 define addMember and addMembers. A group URI may be added as a member only if nested group support is allowed, and recursive group addition is not permitted. The service policy SupportNestedGroups controls whether a member can be a group URI. This matters because deployments can allow flat lists only, or lists that reference other groups.
Clause 8.2.3, 8.2.4, and 8.2.5 define member removal and member queries. Removing a member affects only the current group, and deleting a group URI removes the reference rather than deleting the referenced group. For queries, resolveGroups = true returns the exclusive union of members from the group and any nested groups, with duplicates removed; resolveGroups = false returns the group members including group references.
Attributes on groups and members
Clause 8.2.6 through 8.2.11 define attributes for groups and group members. Group attributes and group-member attributes use the SimpleAttribute structure, and member-level attributes can also be managed through the Member interface. The document reserves Group.Description and Group.ExpiryDate for defined group attributes. In practice, this lets service providers attach metadata to groups and to specific members inside a group.
Faults and service policies
Clause 9 defines PolicyException cases such as too many members in a group, subgroups not supported, group name too long, and group already exists. Clause 10 defines the service policies MaxGroupLength, MaxGroupMembers, and SupportNestedGroups. These policy names are important because they explain why an operation may be rejected in a deployed system.
What terms does SIST ES 202 504-13 V1.1.1:2008 define?
- application managed group - A group created and managed outside the network, where the members are passed into the network for processing.
- group - A container for a set of addresses, not an address itself; it can also contain other groups whose addresses are logically included.
- group resolution - The process of expanding a group, including nested groups, into a unique set of addresses with duplicates removed.
- network managed group - A group created and managed within the network, so Web Services can refer to its members by group name.
- AccessPermissions - A structure that carries the four requester permissions: admin, add, delete, and query.
- SimpleAttribute - A name-value attribute with a type field and a status field, used for group and member metadata.
Who uses SIST ES 202 504-13 V1.1.1:2008?
SIST ES 202 504-13 V1.1.1:2008 is used by application developers who need to work with network functions through OSA APIs. It is also used by service providers that expose group-based address services, and by administrators or operators who control group creation, membership, access rights, and attribute data.
It is relevant in systems that use Parlay X 3 Web Services and need a standard way to represent address lists, subgroup references, and service-policy limits.
Which standards are used with SIST ES 202 504-13 V1.1.1:2008?
The document uses three normative references.
- ETSI ES 202 504-1 - Supplies the common Parlay X 3 framework and shared definitions used by this part.
- W3C Recommendation: XML Schema Part 2: Datatypes - Provides the XML Schema datatypes used for values such as
xsd:boolean,xsd:string, andxsd:anyURI. - IETF RFC 2396 - Provides the URI syntax used for group names and domain segments.
What does the SIST ES 202 504-13 V1.1.1:2008 document contain?
The document contains sequence diagrams for managing groups and members, including create, delete, query, and access-control flows. It also contains XML Schema data type definitions for AccessPermissions, AttributeStatus, and SimpleAttribute, which are the building blocks used in the interface messages.
Clause 8 gives the detailed Web Service interface definition, including request and response messages for each operation in the GroupManagement, Group, and Member interfaces. Clause 9 lists the PolicyException messages and their meaning, while clause 10 lists the service-policy parameters that shape runtime behavior.
Annex A provides the normative WSDL package for implementation work, and the document notes that the WSDL is in document/literal form and compliant with ES 202 504-1.
Buy Documents
ETSI ES 202 504-13 V1.1.1 (2008-02) - Open Service Access (OSA); Parlay X Web Services; Part 13: Address List Management (Parlay X 3)
ETSI ES 202 504-13 V1.1.1 (2008-05) - Open Service Access (OSA); Parlay X Web Services; Part 13: Address List Management (Parlay X 3)
Get Certified
Connect with accredited certification bodies for this standard
BSI Group
BSI (British Standards Institution) is the business standards company that helps organizations make excellence a habit.
NYCE
Mexican standards and certification body.
Sponsored listings
Frequently Asked Questions
SIST ES 202 504-13 V1.1.1:2008 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Open Service Access (OSA) - Parlay X Web Services - Part 13: Address List Management (Parlay X 3)". This standard covers: New edition of ParlayX specification based on requirements in EG 201 988-4, corresponding to 3GPP TS 29.199 Rel-7.The present document is part 13 of the Stage 3 Parlay X 3 Web Services specification for Open Service Access (OSA). The OSA specifications define an architecture that enables application developers to make use of network functionality through an open standardized interface, i.e. the OSA APIs. The present document specifies the Address List Management Web Service. The following are defined here: • Name spaces. • Sequence diagrams. • Data definitions. • Interface specification plus detailed method descriptions. • Fault definitions. • Service Policies. • WSDL Description of the interfaces.
New edition of ParlayX specification based on requirements in EG 201 988-4, corresponding to 3GPP TS 29.199 Rel-7.The present document is part 13 of the Stage 3 Parlay X 3 Web Services specification for Open Service Access (OSA). The OSA specifications define an architecture that enables application developers to make use of network functionality through an open standardized interface, i.e. the OSA APIs. The present document specifies the Address List Management Web Service. The following are defined here: • Name spaces. • Sequence diagrams. • Data definitions. • Interface specification plus detailed method descriptions. • Fault definitions. • Service Policies. • WSDL Description of the interfaces.
SIST ES 202 504-13 V1.1.1:2008 is classified under the following ICS (International Classification for Standards) categories: 35.100.01 - Open systems interconnection in general. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST ES 202 504-13 V1.1.1:2008 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
Final draft ETSI ES 202 504-13 V1.1.1 (2008-02)
ETSI Standard
Open Service Access (OSA);
Parlay X Web Services;
Part 13: Address List Management
(Parlay X 3)
�
2 Final draft ETSI ES 202 504-13 V1.1.1 (2008-02)
Reference
DES/TISPAN-01034-13-OSA
Keywords
API, OSA, service
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2008.
© The Parlay Group 2008.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
3 Final draft ETSI ES 202 504-13 V1.1.1 (2008-02)
Contents
Intellectual Property Rights.5
Foreword.5
1 Scope.7
2 References.7
2.1 Normative references.7
3 Definitions and abbreviations.8
3.1 Definitions.8
3.2 Abbreviations.8
4 Detailed service description .8
4.1 Group URI format .8
4.2 Address list usage in services .9
5 Namespaces.9
6 Sequence diagrams.10
6.1 Manage groups (Create, delete, query, set access and query access) .10
6.2 Manage group members (AddMember, AddMembers, DeleteMember, DeleteMembers,
QueryMembers) .11
7 XML Schema data type definition .11
7.1 AccessPermissions structure.11
7.2 AttributeStatus enumeration.11
7.3 SimpleAttribute structure.12
8 Web Service interface definition.12
8.1 Interface: GroupManagement.12
8.1.1 Operation: createGroup.12
8.1.1.1 Input message: createGroupRequest.12
8.1.1.2 Output message: createGroupResponse.13
8.1.1.3 Referenced faults.13
8.1.2 Operation: deleteGroup.13
8.1.2.1 Input message: deleteGroupRequest.13
8.1.2.2 Output message: deleteGroupResponse.13
8.1.2.3 Referenced faults.13
8.1.3 Operation: queryGroups.13
8.1.3.1 Input message: queryGroupsRequest.14
8.1.3.2 Output message: queryGroupsResponse.14
8.1.3.3 Referenced faults.14
8.1.4 Operation: setAccess.14
8.1.4.1 Input message: setAccessRequest .15
8.1.4.2 Output message: setAccessResponse.15
8.1.4.3 Referenced faults.15
8.1.5 Operation: queryAccess.15
8.1.5.1 Input message: queryAccessRequest.15
8.1.5.2 Output message: queryAccessResponse.15
8.1.5.3 Referenced faults.15
8.2 Interface: Group.16
8.2.1 Operation: addMember.16
8.2.1.1 Input message: addMemberRequest.16
8.2.1.2 Output message: addMemberResponse.16
8.2.1.3 Referenced faults.16
8.2.2 Operation: addMembers.16
8.2.2.1 Input message: addMembersRequest.16
8.2.2.2 Output message: addMembersResponse.17
8.2.2.3 Referenced faults.17
8.2.3 Operation: deleteMember.17
ETSI
4 Final draft ETSI ES 202 504-13 V1.1.1 (2008-02)
8.2.3.1 Input message: deleteMemberRequest.17
8.2.3.2 Output message: deleteMemberResponse.17
8.2.3.3 Referenced faults.17
8.2.4 Operation: deleteMembers.17
8.2.4.1 Input message: deleteMembersRequest.18
8.2.4.2 Output message: deleteMembersResponse .18
8.2.4.3 Referenced faults.18
8.2.5 Operation: queryMembers.18
8.2.5.1 Input message: queryMembersRequest.18
8.2.5.2 Output message: queryMembersResponse.18
8.2.5.3 Referenced faults.19
8.2.6 Operation: addGroupAttribute.19
8.2.6.1 Input message: addGroupAttributeRequest.19
8.2.6.2 Output message: addGroupAttributeResponse.19
8.2.6.3 Referenced faults.19
8.2.7 Operation: deleteGroupAttribute.19
8.2.7.1 Input message: deleteGroupAttributeRequest.19
8.2.7.2 Output message: deleteGroupAttributeResponse.20
8.2.7.3 Referenced faults.20
8.2.8 Operation: queryGroupAttributes.20
8.2.8.1 Input message: queryGroupAttributesRequest.20
8.2.8.2 Output message: queryGroupAttributesResponse.20
8.2.8.3 Referenced faults.20
8.2.9 Operation: addGroupMemberAttribute.20
8.2.9.1 Input message: addGroupMemberAttributeRequest.20
8.2.9.2 Output message: addGroupMemberAttributeResponse .21
8.2.9.3 Referenced faults.21
8.2.10 Operation: deleteGroupMemberAttribute.21
8.2.10.1 Input message: deleteGroupMemberAttributeRequest.21
8.2.10.2 Output message: deleteGroupMemberAttributeResponse .21
8.2.10.3 Referenced faults.21
8.2.11 Operation: queryGroupMemberAttributes.21
8.2.11.1 Input message: queryGroupMemberAttributesRequest.21
8.2.11.2 Output message: queryGroupMemberAttributesResponse.22
8.2.11.3 Referenced faults.22
8.3 Interface: Member.22
8.3.1 Operation: addMemberAttribute.22
8.3.1.1 Input message: addMemberAttributeRequest.22
8.3.1.2 Output message: addMemberAttributeResponse.22
8.3.1.3 Referenced faults.22
8.3.2 Operation: queryMemberAttributes.23
8.3.2.1 Input message: queryMemberAttributesRequest.23
8.3.2.2 Output message: queryMemberAttributesResponse .23
8.3.2.3 Referenced faults.23
8.3.3 Operation: deleteMemberAttribute.23
8.3.3.1 Input message: deleteMemberAttributeRequest.23
8.3.3.2 Output message: deleteMemberAttributeResponse.23
8.3.3.3 Referenced faults.23
9 Fault definitions.24
9.1 PolicyException.24
9.1.1 POL0210: Too many members in group.24
9.1.2 POL0211: Subgroups not supported.24
9.1.3 POL0212: Group name too long.24
9.1.4 POL0213: Group already exists.24
10 Service policies .24
Annex A (normative): WSDL for Address List Management.25
Annex B (informative): Bibliography.26
History .27
ETSI
5 Final draft ETSI ES 202 504-13 V1.1.1 (2008-02)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This ETSI Standard (ES) has been produced by ETSI Technical Committee Telecommunications and Internet
converged Services and Protocols for Advanced Networking (TISPAN), and is now submitted for the ETSI standards
Membership Approval Procedure.
The present document is part 13 of a multi-part deliverable covering Open Service Access (OSA); Parlay X
Web Services, as identified below:
Part 1: "Common";
Part 2: "Third Party Call";
Part 3: "Call Notification";
Part 4: "Short Messaging";
Part 5: "Multimedia Messaging";
Part 6: "Payment";
Part 7: "Account Management";
Part 8: "Terminal Status";
Part 9: "Terminal Location";
Part 10: "Call Handling";
Part 11: "Audio Call";
Part 12: "Multimedia Conference";
Part 13: "Address List Management";
Part 14: "Presence";
Part 15: "Message Broadcast";
Part 16: "Geocoding";
Part 17: "Application-driven Quality of Service (QoS)";
Part 18: "Device Capabilities and Configuration";
Part 19: "Multimedia Streaming Control";
Part 20: "Multimedia Multicast Session Management".
ETSI
6 Final draft ETSI ES 202 504-13 V1.1.1 (2008-02)
The present document has been defined jointly between ETSI, The Parlay Group (http://www.parlay.org) and the 3GPP.
The present document forms part of the Parlay X 3.0 set of specifications.
The present document is equivalent to 3GPP TS 29.199-13 V7.0.2 (Release 7).
ETSI
7 Final draft ETSI ES 202 504-13 V1.1.1 (2008-02)
1 Scope
The present document is part 13 of the Stage 3 Parlay X 3 Web Services specification for Open Service Access (OSA).
The OSA specifications define an architecture that enables application developers to make use of network functionality
through an open standardized interface, i.e. the OSA APIs.
The present document specifies the Address List Management Web Service. The following are defined here:
• Name spaces.
• Sequence diagrams.
• Data definitions.
• Interface specification plus detailed method descriptions.
• Fault definitions.
• Service Policies.
• WSDL Description of the interfaces.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• Non-specific reference may be made only to a complete document or a part thereof and only in the following
cases:
- if it is accepted that it will be possible to use all future changes of the referenced document for the
purposes of the referring document;
- for informative references.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
For online referenced documents, information sufficient to identify and locate the source shall be provided. Preferably,
the primary source of the referenced document should be cited, in order to ensure traceability. Furthermore, the
reference should, as far as possible, remain valid for the expected life of the document. The reference shall include the
method of access to the referenced document and the full network address, with the same punctuation and use of upper
case and lower case letters.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
2.1 Normative references
The following referenced documents are indispensable for the application of the present document. For dated
references, only the edition cited applies. For non-specific references, the latest edition of the referenced document
(including any amendments) applies.
[1] W3C Recommendation (2 May 2001): "XML Schema Part 2: Datatypes".
NOTE: Available at http://www.w3.org/TR/2001/REC-xmlschema-2-20010502/.
ETSI
8 Final draft ETSI ES 202 504-13 V1.1.1 (2008-02)
[2] ETSI ES 202 504-1: "Open Service Access (OSA); Parlay X Web Services; Part 1: Common
(Parlay X 3)".
[3] IETF RFC 2396: "Uniform Resource Identifiers (URI): Generic Syntax".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in ES 202 504-1 [2] and the following apply:
application managed group: group created and managed outside of the network, requiring the group members to be
passed into the network for processing
group: Container for a set of addresses, it is not an address itself. When a group contain one or more groups, logically
the group contains the set of addresses it holds, plus the set of addresses that any contained group holds (including any
addresses contained in groups that a contained group holds).
group resolution: When a group is processed by a service, it expands the group (and any nested groups) into a set of
addresses. The resulting set of addresses contains no groups, and any duplicate addresses are removed. Thus, a resolved
group may be considered an exclusive union of all of its contained members.
network managed group: group created and managed within a network, allowing Web Services to reference the
members of a group using the group name
3.2 Abbreviations
For the purposes of the present document, the abbreviations given in ES 202 504-1 [2] apply.
4 Detailed service description
The present document defines two related interfaces, one to manage the groups themselves - creation, deletion, query
and access right management. The second interface manages the members within a group, supporting add, delete and
query operations.
Addresses are not created using this service, they must already exist.
4.1 Group URI format
A group URI is consistent with the style defined in RFC 2396 [3], supporting the following URI style which is used in
schemes such as sip and mailto:
scheme:dept1294@mydivision.mycompany.serviceprovider.com
The group URI consists of the following discrete elements:
Scheme: selected by the provider of the group URI.
Group name: following the conventions of RFC 2396 [3].
Suffix: may be added by Service Provider (if allowed by creation operation) to create a unique name when the
Prefix + Group name already exists.
Sub-domain: defined by the requester, this is contained within the domain provided by the service provider.
Domain: defined by the Service Provider, and cannot be specified by the application.
ETSI
9 Final draft ETSI ES 202 504-13 V1.1.1 (2008-02)
This definition of a group URI enables flexibility on the part of the Service Provider and the Requester, while ensuring
unique groups are created and providing transparency of implementation of group storage.
The following are some group URI examples.
• sip:salesteam@sales.acme.anytelco.com
• sip:salesteam1@sales.acme.anytelco.com
• mailto:fieldservice@cityofaustin.anytelco.com
• group:mailroom@bldg001.acme.anytelco.com
These examples show (1)(2) use of prefix to cr
...
ETSI Standard
Open Service Access (OSA);
Parlay X Web Services;
Part 13: Address List Management
(Parlay X 3)
�
2 ETSI ES 202 504-13 V1.1.1 (2008-05)
Reference
DES/TISPAN-01034-13-OSA
Keywords
API, OSA, service
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2008.
© The Parlay Group 2008.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
3 ETSI ES 202 504-13 V1.1.1 (2008-05)
Contents
Foreword.6
1 Scope.7
2 References.7
2.1 Normative references.7
3 Definitions and abbreviations.8
3.1 Definitions.8
3.2 Abbreviations.8
4 Detailed service description .8
4.1 Group URI format .8
4.2 Address list usage in services .9
5 Namespaces.9
6 Sequence diagrams.10
6.1 Manage groups (Create, delete, query, set access and query access) .10
6.2 Manage group members (AddMember, AddMembers, DeleteMember, DeleteMembers,
QueryMembers) .11
7 XML Schema data type definition .11
7.1 AccessPermissions structure.11
7.2 AttributeStatus enumeration.11
7.3 SimpleAttribute structure.12
8 Web Service interface definition.12
8.1 Interface: GroupManagement.12
8.1.1 Operation: createGroup.12
8.1.1.1 Input message: createGroupRequest.12
8.1.1.2 Output message: createGroupResponse.13
8.1.1.3 Referenced faults.13
8.1.2 Operation: deleteGroup.13
8.1.2.1 Input message: deleteGroupRequest.13
8.1.2.2 Output message: deleteGroupResponse.13
8.1.2.3 Referenced faults.13
8.1.3 Operation: queryGroups.13
8.1.3.1 Input message: queryGroupsRequest.14
8.1.3.2 Output message: queryGroupsResponse.14
8.1.3.3 Referenced faults.14
8.1.4 Operation: setAccess.14
8.1.4.1 Input message: setAccessRequest .15
8.1.4.2 Output message: setAccessResponse.15
8.1.4.3 Referenced faults.15
8.1.5 Operation: queryAccess.15
8.1.5.1 Input message: queryAccessRequest.15
8.1.5.2 Output message: queryAccessResponse.15
8.1.5.3 Referenced faults.15
8.2 Interface: Group.16
8.2.1 Operation: addMember.16
8.2.1.1 Input message: addMemberRequest.16
8.2.1.2 Output message: addMemberResponse.16
8.2.1.3 Referenced faults.16
8.2.2 Operation: addMembers.16
8.2.2.1 Input message: addMembersRequest.16
8.2.2.2 Output message: addMembersResponse.17
8.2.2.3 Referenced faults.17
8.2.3 Operation: deleteMember.17
8.2.3.1 Input message: deleteMemberRequest.17
ETSI
4 ETSI ES 202 504-13 V1.1.1 (2008-05)
8.2.3.2 Output message: deleteMemberResponse.17
8.2.3.3 Referenced faults.17
8.2.4 Operation: deleteMembers.17
8.2.4.1 Input message: deleteMembersRequest.18
8.2.4.2 Output message: deleteMembersResponse .18
8.2.4.3 Referenced faults.18
8.2.5 Operation: queryMembers.18
8.2.5.1 Input message: queryMembersRequest.18
8.2.5.2 Output message: queryMembersResponse.18
8.2.5.3 Referenced faults.19
8.2.6 Operation: addGroupAttribute.19
8.2.6.1 Input message: addGroupAttributeRequest.19
8.2.6.2 Output message: addGroupAttributeResponse.19
8.2.6.3 Referenced faults.19
8.2.7 Operation: deleteGroupAttribute.19
8.2.7.1 Input message: deleteGroupAttributeRequest.19
8.2.7.2 Output message: deleteGroupAttributeResponse.20
8.2.7.3 Referenced faults.20
8.2.8 Operation: queryGroupAttributes.20
8.2.8.1 Input message: queryGroupAttributesRequest.20
8.2.8.2 Output message: queryGroupAttributesResponse.20
8.2.8.3 Referenced faults.20
8.2.9 Operation: addGroupMemberAttribute.20
8.2.9.1 Input message: addGroupMemberAttributeRequest.20
8.2.9.2 Output message: addGroupMemberAttributeResponse .21
8.2.9.3 Referenced faults.21
8.2.10 Operation: deleteGroupMemberAttribute.21
8.2.10.1 Input message: deleteGroupMemberAttributeRequest.21
8.2.10.2 Output message: deleteGroupMemberAttributeResponse .21
8.2.10.3 Referenced faults.21
8.2.11 Operation: queryGroupMemberAttributes.21
8.2.11.1 Input message: queryGroupMemberAttributesRequest.21
8.2.11.2 Output message: queryGroupMemberAttributesResponse.22
8.2.11.3 Referenced faults.22
8.3 Interface: Member.22
8.3.1 Operation: addMemberAttribute.22
8.3.1.1 Input message: addMemberAttributeRequest.22
8.3.1.2 Output message: addMemberAttributeResponse.22
8.3.1.3 Referenced faults.22
8.3.2 Operation: queryMemberAttributes.23
8.3.2.1 Input message: queryMemberAttributesRequest.23
8.3.2.2 Output message: queryMemberAttributesResponse .23
8.3.2.3 Referenced faults.23
8.3.3 Operation: deleteMemberAttribute.23
8.3.3.1 Input message: deleteMemberAttributeRequest.23
8.3.3.2 Output message: deleteMemberAttributeResponse.23
8.3.3.3 Referenced faults.23
9 Fault definitions.24
9.1 PolicyException.24
9.1.1 POL0210: Too many members in group.24
9.1.2 POL0211: Subgroups not supported.24
9.1.3 POL0212: Group name too long.24
9.1.4 POL0213: Group already exists.24
10 Service policies .24
Annex A (normative): WSDL for Address List Management.25
Annex B (informative): Bibliography.26
History .27
ETSI
5 ETSI ES 202 504-13 V1.1.1 (2008-05)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This ETSI Standard (ES) has been produced by ETSI Technical Committee Telecommunications and Internet
converged Services and Protocols for Advanced Networking (TISPAN).
The present document is part 13 of a multi-part deliverable covering Open Service Access (OSA); Parlay X
Web Services, as identified below:
Part 1: "Common";
Part 2: "Third Party Call";
Part 3: "Call Notification";
Part 4: "Short Messaging";
Part 5: "Multimedia Messaging";
Part 6: "Payment";
Part 7: "Account Management";
Part 8: "Terminal Status";
Part 9: "Terminal Location";
Part 10: "Call Handling";
Part 11: "Audio Call";
Part 12: "Multimedia Conference";
Part 13: "Address List Management";
Part 14: "Presence";
Part 15: "Message Broadcast";
Part 16: "Geocoding";
Part 17: "Application-driven Quality of Service (QoS)";
Part 18: "Device Capabilities and Configuration";
Part 19: "Multimedia Streaming Control";
Part 20: "Multimedia Multicast Session Management".
ETSI
6 ETSI ES 202 504-13 V1.1.1 (2008-05)
The present document has been defined jointly between ETSI, The Parlay Group (http://www.parlay.org) and the 3GPP.
The present document forms part of the Parlay X 3.0 set of specifications.
The present document is equivalent to 3GPP TS 29.199-13 V7.0.2 (Release 7).
ETSI
7 ETSI ES 202 504-13 V1.1.1 (2008-05)
1 Scope
The present document is part 13 of the Stage 3 Parlay X 3 Web Services specification for Open Service Access (OSA).
The OSA specifications define an architecture that enables application developers to make use of network functionality
through an open standardized interface, i.e. the OSA APIs.
The present document specifies the Address List Management Web Service. The following are defined here:
• Name spaces.
• Sequence diagrams.
• Data definitions.
• Interface specification plus detailed method descriptions.
• Fault definitions.
• Service Policies.
• WSDL Description of the interfaces.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• Non-specific reference may be made only to a complete document or a part thereof and only in the following
cases:
- if it is accepted that it will be possible to use all future changes of the referenced document for the
purposes of the referring document;
- for informative references.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
For online referenced documents, information sufficient to identify and locate the source shall be provided. Preferably,
the primary source of the referenced document should be cited, in order to ensure traceability. Furthermore, the
reference should, as far as possible, remain valid for the expected life of the document. The reference shall include the
method of access to the referenced document and the full network address, with the same punctuation and use of upper
case and lower case letters.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
2.1 Normative references
The following referenced documents are indispensable for the application of the present document. For dated
references, only the edition cited applies. For non-specific references, the latest edition of the referenced document
(including any amendments) applies.
[1] W3C Recommendation (2 May 2001): "XML Schema Part 2: Datatypes".
NOTE: Available at http://www.w3.org/TR/2001/REC-xmlschema-2-20010502/.
ETSI
8 ETSI ES 202 504-13 V1.1.1 (2008-05)
[2] ETSI ES 202 504-1: "Open Service Access (OSA); Parlay X Web Services; Part 1: Common
(Parlay X 3)".
[3] IETF RFC 2396: "Uniform Resource Identifiers (URI): Generic Syntax".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in ES 202 504-1 [2] and the following apply:
application managed group: group created and managed outside of the network, requiring the group members to be
passed into the network for processing
group: Container for a set of addresses, it is not an address itself. When a group contain one or more groups, logically
the group contains the set of addresses it holds, plus the set of addresses that any contained group holds (including any
addresses contained in groups that a contained group holds).
group resolution: When a group is processed by a service, it expands the group (and any nested groups) into a set of
addresses. The resulting set of addresses contains no groups, and any duplicate addresses are removed. Thus, a resolved
group may be considered an exclusive union of all of its contained members.
network managed group: group created and managed within a network, allowing Web Services to reference the
members of a group using the group name
3.2 Abbreviations
For the purposes of the present document, the abbreviations given in ES 202 504-1 [2] apply.
4 Detailed service description
The present document defines two related interfaces, one to manage the groups themselves - creation, deletion, query
and access right management. The second interface manages the members within a group, supporting add, delete and
query operations.
Addresses are not created using this service, they must already exist.
4.1 Group URI format
A group URI is consistent with the style defined in RFC 2396 [3], supporting the following URI style which is used in
schemes such as sip and mailto:
scheme:dept1294@mydivision.mycompany.serviceprovider.com
The group URI consists of the following discrete elements:
Scheme: selected by the provider of the group URI.
Group name: following the conventions of RFC 2396 [3].
Suffix: may be added by Service Provider (if allowed by creation operation) to create a unique name when the
Prefix + Group name already exists.
Sub-domain: defined by the requester, this is contained within the domain provided by the service provider.
Domain: defined by the Service Provider, and cannot be specified by the application.
ETSI
9 ETSI ES 202 504-13 V1.1.1 (2008-05)
This definition of a group URI enables flexibility on the part of the Service Provider and the Requester, while ensuring
unique groups are created and providing transparency of implementation of group storage.
The following are some group URI examples.
• sip:salesteam@sales.acme.anytelco.com
• sip:salesteam1@sales.acme.anytelco.com
• mailto:fieldservice@cityofaustin.anytelco.com
• group:mailroom@bldg001.acme.anytelco.com
These examples show (1)(2) use of prefix to create unique names, (1)(3) use of different defined schemes, and (4) use
of
...
SLOVENSKI STANDARD
01-september-2008
Odprti dostop do storitve (OSA) - Spletne storitve Parlay X - 13. del: Upravljanje
seznama naslovov (Parlay X 3)
Open Service Access (OSA) - Parlay X Web Services - Part 13: Address List
Management (Parlay X 3)
Ta slovenski standard je istoveten z: ES 202 504-13 Version 1.1.1
ICS:
35.100.01 Medsebojno povezovanje Open systems
odprtih sistemov na splošno interconnection in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
ETSI Standard
Open Service Access (OSA);
Parlay X Web Services;
Part 13: Address List Management
(Parlay X 3)
�
2 ETSI ES 202 504-13 V1.1.1 (2008-05)
Reference
DES/TISPAN-01034-13-OSA
Keywords
API, OSA, service
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2008.
© The Parlay Group 2008.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
3 ETSI ES 202 504-13 V1.1.1 (2008-05)
Contents
Foreword.6
1 Scope.7
2 References.7
2.1 Normative references.7
3 Definitions and abbreviations.8
3.1 Definitions.8
3.2 Abbreviations.8
4 Detailed service description .8
4.1 Group URI format .8
4.2 Address list usage in services .9
5 Namespaces.9
6 Sequence diagrams.10
6.1 Manage groups (Create, delete, query, set access and query access) .10
6.2 Manage group members (AddMember, AddMembers, DeleteMember, DeleteMembers,
QueryMembers) .11
7 XML Schema data type definition .11
7.1 AccessPermissions structure.11
7.2 AttributeStatus enumeration.11
7.3 SimpleAttribute structure.12
8 Web Service interface definition.12
8.1 Interface: GroupManagement.12
8.1.1 Operation: createGroup.12
8.1.1.1 Input message: createGroupRequest.12
8.1.1.2 Output message: createGroupResponse.13
8.1.1.3 Referenced faults.13
8.1.2 Operation: deleteGroup.13
8.1.2.1 Input message: deleteGroupRequest.13
8.1.2.2 Output message: deleteGroupResponse.13
8.1.2.3 Referenced faults.13
8.1.3 Operation: queryGroups.13
8.1.3.1 Input message: queryGroupsRequest.14
8.1.3.2 Output message: queryGroupsResponse.14
8.1.3.3 Referenced faults.14
8.1.4 Operation: setAccess.14
8.1.4.1 Input message: setAccessRequest .15
8.1.4.2 Output message: setAccessResponse.15
8.1.4.3 Referenced faults.15
8.1.5 Operation: queryAccess.15
8.1.5.1 Input message: queryAccessRequest.15
8.1.5.2 Output message: queryAccessResponse.15
8.1.5.3 Referenced faults.15
8.2 Interface: Group.16
8.2.1 Operation: addMember.16
8.2.1.1 Input message: addMemberRequest.16
8.2.1.2 Output message: addMemberResponse.16
8.2.1.3 Referenced faults.16
8.2.2 Operation: addMembers.16
8.2.2.1 Input message: addMembersRequest.16
8.2.2.2 Output message: addMembersResponse.17
8.2.2.3 Referenced faults.17
8.2.3 Operation: deleteMember.17
8.2.3.1 Input message: deleteMemberRequest.17
ETSI
4 ETSI ES 202 504-13 V1.1.1 (2008-05)
8.2.3.2 Output message: deleteMemberResponse.17
8.2.3.3 Referenced faults.17
8.2.4 Operation: deleteMembers.17
8.2.4.1 Input message: deleteMembersRequest.18
8.2.4.2 Output message: deleteMembersResponse .18
8.2.4.3 Referenced faults.18
8.2.5 Operation: queryMembers.18
8.2.5.1 Input message: queryMembersRequest.18
8.2.5.2 Output message: queryMembersResponse.18
8.2.5.3 Referenced faults.19
8.2.6 Operation: addGroupAttribute.19
8.2.6.1 Input message: addGroupAttributeRequest.19
8.2.6.2 Output message: addGroupAttributeResponse.19
8.2.6.3 Referenced faults.19
8.2.7 Operation: deleteGroupAttribute.19
8.2.7.1 Input message: deleteGroupAttributeRequest.19
8.2.7.2 Output message: deleteGroupAttributeResponse.20
8.2.7.3 Referenced faults.20
8.2.8 Operation: queryGroupAttributes.20
8.2.8.1 Input message: queryGroupAttributesRequest.20
8.2.8.2 Output message: queryGroupAttributesResponse.20
8.2.8.3 Referenced faults.20
8.2.9 Operation: addGroupMemberAttribute.20
8.2.9.1 Input message: addGroupMemberAttributeRequest.20
8.2.9.2 Output message: addGroupMemberAttributeResponse .21
8.2.9.3 Referenced faults.21
8.2.10 Operation: deleteGroupMemberAttribute.21
8.2.10.1 Input message: deleteGroupMemberAttributeRequest.21
8.2.10.2 Output message: deleteGroupMemberAttributeResponse .21
8.2.10.3 Referenced faults.21
8.2.11 Operation: queryGroupMemberAttributes.21
8.2.11.1 Input message: queryGroupMemberAttributesRequest.21
8.2.11.2 Output message: queryGroupMemberAttributesResponse.22
8.2.11.3 Referenced faults.22
8.3 Interface: Member.22
8.3.1 Operation: addMemberAttribute.22
8.3.1.1 Input message: addMemberAttributeRequest.22
8.3.1.2 Output message: addMemberAttributeResponse.22
8.3.1.3 Referenced faults.22
8.3.2 Operation: queryMemberAttributes.23
8.3.2.1 Input message: queryMemberAttributesRequest.23
8.3.2.2 Output message: queryMemberAttributesResponse .23
8.3.2.3 Referenced faults.23
8.3.3 Operation: deleteMemberAttribute.23
8.3.3.1 Input message: deleteMemberAttributeRequest.23
8.3.3.2 Output message: deleteMemberAttributeResponse.23
8.3.3.3 Referenced faults.23
9 Fault definitions.24
9.1 PolicyException.24
9.1.1 POL0210: Too many members in group.24
9.1.2 POL0211: Subgroups not supported.24
9.1.3 POL0212: Group name too long.24
9.1.4 POL0213: Group already exists.24
10 Service policies .24
Annex A (normative): WSDL for Address List Management.25
Annex B (informative): Bibliography.26
History .27
ETSI
5 ETSI ES 202 504-13 V1.1.1 (2008-05)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This ETSI Standard (ES) has been produced by ETSI Technical Committee Telecommunications and Internet
converged Services and Protocols for Advanced Networking (TISPAN).
The present document is part 13 of a multi-part deliverable covering Open Service Access (OSA); Parlay X
Web Services, as identified below:
Part 1: "Common";
Part 2: "Third Party Call";
Part 3: "Call Notification";
Part 4: "Short Messaging";
Part 5: "Multimedia Messaging";
Part 6: "Payment";
Part 7: "Account Management";
Part 8: "Terminal Status";
Part 9: "Terminal Location";
Part 10: "Call Handling";
Part 11: "Audio Call";
Part 12: "Multimedia Conference";
Part 13: "Address List Management";
Part 14: "Presence";
Part 15: "Message Broadcast";
Part 16: "Geocoding";
Part 17: "Application-driven Quality of Service (QoS)";
Part 18: "Device Capabilities and Configuration";
Part 19: "Multimedia Streaming Control";
Part 20: "Multimedia Multicast Session Management".
ETSI
6 ETSI ES 202 504-13 V1.1.1 (2008-05)
The present document has been defined jointly between ETSI, The Parlay Group (http://www.parlay.org) and the 3GPP.
The present document forms part of the Parlay X 3.0 set of specifications.
The present document is equivalent to 3GPP TS 29.199-13 V7.0.2 (Release 7).
ETSI
7 ETSI ES 202 504-13 V1.1.1 (2008-05)
1 Scope
The present document is part 13 of the Stage 3 Parlay X 3 Web Services specification for Open Service Access (OSA).
The OSA specifications define an architecture that enables application developers to make use of network functionality
through an open standardized interface, i.e. the OSA APIs.
The present document specifies the Address List Management Web Service. The following are defined here:
• Name spaces.
• Sequence diagrams.
• Data definitions.
• Interface specification plus detailed method descriptions.
• Fault definitions.
• Service Policies.
• WSDL Description of the interfaces.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• Non-specific reference may be made only to a complete document or a part thereof and only in the following
cases:
- if it is accepted that it will be possible to use all future changes of the referenced document for the
purposes of the referring document;
- for informative references.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
For online referenced documents, information sufficient to identify and locate the source shall be provided. Preferably,
the primary source of the referenced document should be cited, in order to ensure traceability. Furthermore, the
reference should, as far as possible, remain valid for the expected life of the document. The reference shall include the
method of access to the referenced document and the full network address, with the same punctuation and use of upper
case and lower case letters.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
2.1 Normative references
The following referenced documents are indispensable for the application of the present document. For dated
references, only the edition cited applies. For non-specific references, the latest edition of the referenced document
(including any amendments) applies.
[1] W3C Recommendation (2 May 2001): "XML Schema Part 2: Datatypes".
NOTE: Available at http://www.w3.org/TR/2001/REC-xmlschema-2-20010502/.
ETSI
8 ETSI ES 202 504-13 V1.1.1 (2008-05)
[2] ETSI ES 202 504-1: "Open Service Access (OSA); Parlay X Web Services; Part 1: Common
(Parlay X 3)".
[3] IETF RFC 2396: "Uniform Resource Identifiers (URI): Generic Syntax".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in ES 202 504-1 [2] and the following apply:
application managed group: group created and managed outside of the network, requiring the group members to be
passed into the network for processing
group: Container for a set of addresses, it is not an address itself. When a group contain one or more groups, logically
the group contains the set of addresses it holds, plus the set of addresses that any contained group holds (including any
addresses contained in groups that a contained group holds).
group resolution: When a group is processed by a service, it expands the group (and any nested groups) into a set of
addresses. The resulting set of addresses contains no groups, and any duplicate addresses are removed. Thus, a resolved
group may be considered an exclusive union of all of its contained members.
network managed group: group created and managed within a network, allowing Web Services to reference the
members of a group using the group name
3.2 Abbreviations
For the purposes of the present document, the abbreviations given in ES 202 504-1 [2] apply.
4 Detailed service description
The present document defines two related interfaces, one to manage the groups themselves - creation, deletion, query
and access right management. The second interface manages the members within a group, supporting add, delete and
query operations.
Addresses are not created using this service, they must already exist.
4.1 Group URI format
A group URI is consistent with the style defined in RFC 2396 [3], supporting the following URI style which is used in
schemes such as sip and mailto:
scheme:dept1294@mydivision.mycompany.serviceprovider.com
The group URI consists of the following discrete elements:
Scheme: selected by the provider of the group URI.
Group name: following the conventions of RFC 2396 [3].
Suffix: may be added by Service Provider (if allowed by creation operation) to create a unique name when the
Prefix + Group name already exists.
Sub-domain: defined by the requester, this is contained within the domain provided by the service provider.
Domain: defined by the Service Provider, and cannot be specified by the application.
ETSI
9 ETSI ES 202 504-13 V1.1.1 (2008-05)
This definition of a group URI enables flexibility on the part of the Service Provider and the Requester, while ensuring
unique groups are created and providing transparency of implementation of group storage.
The following are some group URI examples.
• sip:salesteam@sales.acme.anytelco.com
• sip:salesteam1@sales.acme.anytelco.com
•
...