iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 12842:2001

(Main)

Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods

Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods

This European Standard specifies the requirements and associated test methods applicable to ductile iron fittings and their joints to be used with poly(vinyl chloride) (PVC-U) pipes for polyethylene (PE) pipes, in conformity with prEN 1452-1 to 7 and prEN 12201-1 to 7 respectively, for the construction of pipelines: - to convey water (e.g. potable water); - with or without pressure; - to be installed below or above ground, inside or outside buildings.

Duktile Gußformstücke für PVC-U- oder PE-Rohrleitungssysteme - Anforderungen und Prüfverfahren

Diese Europäische Norm legt die Anforderungen und die diesbezüglichen Prüfverfahren fest für duktile Gußformstücke und deren Dichtungen (Verbindungen) angewendet mit Poly(vinylchlorid) (PVC-U) Rohre oder Polyethyle (PE) Rohre, in Übereinstimmung mit prEN 1452-1 bis 7 und prEN 12201-1 bis 7, bzw. für den Rohrbau: - zum Transport von Wasser (z.B. Trinkwasser); - mit oder ohne Innendruck; - oberirdisch oder erdverlegt, innerhalb oder außerhalb von Gebäuden.

Raccords en fonte ductile pour systemes de canalisations en PVC-U ou en PE - Prescriptions et méthodes d'essai

La présente norme européenne prescrit les exigences et les méthodes d'essais associées, applicables aux raccords en fonte ductile, et leurs assemblages, a utiliser avec les tuyaux en polychlorure de vinyle (PVC-U) ou en polyéthylene (PE), conformes aux prEN 1452-1 a 7 et prEN 12201-1 a 7 respectivement, destinés a la construction de canalisations: - pour transporter de l'eau (par exemple de l'eau potable); - avec ou sans pression; - pour etre installées dansle sol ou en aérien, a l'intérieur ou a l'extérieur des bâtiments.

Fitingi iz duktilne litine za PVC-U ali PE cevne sisteme - Zahteve in postopki preskušanja

General Information

Status
Withdrawn
Publication Date
31-Dec-2000
Withdrawal Date
19-Sep-2012
ICS
23.040.40 - Metal fittings
Technical Committee
TLP - Pressure vessels
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
18-Sep-2012
Due Date
11-Oct-2012
Completion Date
20-Sep-2012
Directive
89/106/EEC - Construction products
Ref Project
EN 12842:2000 - Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods

Relations

Replaced By
SIST EN 12842:2012 - Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods
Effective Date
01-Oct-2012

Buy Standard

EN 12842:2001EN 12842:2001
PreviousNext
Standard
EN 12842:2001
English language
38 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Fitingi iz duktilne litine za PVC-U ali PE cevne sisteme - Zahteve in postopki preskušanjaDuktile Gußformstücke für PVC-U- oder PE-Rohrleitungssysteme - Anforderungen und PrüfverfahrenRaccords en fonte ductile pour systemes de canalisations en PVC-U ou en PE - Prescriptions et méthodes d'essaiDuctile iron fittings for PVC-U or PE piping systems - Requirements and test methods23.040.40Kovinski fitingiMetal fittingsICS:Ta slovenski standard je istoveten z:EN 12842:2000SIST EN 12842:2001en01-januar-2001SIST EN 12842:2001SLOVENSKI
STANDARD



SIST EN 12842:2001



SIST EN 12842:2001



SIST EN 12842:2001



SIST EN 12842:2001



SIST EN 1284
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 877:2022(Main)
Cast iron pipe systems and their components for the evacuation of water from works - Characteristics and test methods
EN 877:2021

This document specifies product characteristics, test/assessment methods and of how to express test/assessment results. Cast iron pipelines kits are usually composed by cast iron pipes, fittings, joints and accessories.
This document covers the range of nominal diameter from DN /40 to DN 600 inclusive.
The cast iron includes grey cast iron and ductile cast iron.
The roof gullies used for siphonic systems are outside the scope of this standard.
Sewerage applications are outside the scope of this standard.
It is intended to be used for the construction of gravity or vacuum discharge pressurized or unpressurised networks installed inside and/or outside Works, above and/or below ground, in construction works.

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    69 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15655-2:2021(Main)
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 2: Thermoplastic Modified Polyolefin (TMPO) lining of pipes
EN 15655-2:2020

This European Standard defines the requirements and test methods for thermoplastic modified polyolefin (TMPO) lining of pipes and fittings.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14628-1:2020(Main)
Ductile iron pipes, fittings and accessories - Requirements and test methods - Part 1: PE coatings
EN 14628-1:2020

This European Standard defines the requirements and test methods applicable to factory applied extruded polyethylene coatings for the external corrosion protection of ductile iron pipes conforming to EN 545, EN 598 and EN 969 for use at operating temperatures up to 50 °C.
This European Standard does not cover ductile iron pipes protected with thin PE sleeve. Special works at site like drilling, tapping etc. may influence the corrosion protection properties. Those job steps shall be included in the instructions of pipe saddle and accessory manufacturers and all other essential installation instructions. These instructions are not part of this European Standard.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14901-2:2020(Main)
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 2: Thermoplastic acid modified polyolefin coating (TMPO)
EN 14901-2:2019

To allow ductile iron pipe manufacturers and users of the product to apply TMPO linings and thereby comply with the relevant requirements of EN 545, EN 545, EN 969. This demonstrates innovation according to Annex I, by the use of non-traditional coating systems offering environmental and economic benefits. The TMPO linings meet the criteria expressed in EN 14901, except for those pertinent to fusion bonded epoxy chemistry. The linings are being used in other parts of the world eg Australia and New Zealand and have been incorporated in the recent AWWA C116/A21.16-15 publication. The current status for TMPO linings in EU amounts to a barrier to trade and does not support SME’s involved in the manufacture, lining and application of the material that offers human health benefits, as highlighted in the Annex I and II.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14901-1:2014+A1:2020(Main)
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic coatings of ductile iron fittings and accessories - Part 1: Epoxy coating (heavy duty)
EN 14901-1:2014+A1:2019

This European Standard defines the requirements and test methods for factory applied epoxy coatings (fusion bonded powder or liquid two-pack) used for the corrosion protection of ductile iron fittings and accessories conforming to EN 545, EN 598, EN 969, EN 12842, EN 14525, for:
-   conveying water (e.g. potable water) at operating temperature up to 50 °C excluding frost; or
-   conveying waste water at operating temperature up to 45 °C excluding frost; or
-   conveying gas at operating temperature up to 50 °C;
-   suitable for external environments, i.e. soils, waters and atmospheres of all common corrosion loads, characterized in EN 545:2010, D.2.3.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15655-1:2019(Main)
Ductile iron pipes, fittings and accessories - Requirements and test methods for organic linings of ductile iron pipes and fittings - Part 1: Polyurethane lining of pipes and fittings
EN 15655-1:2018

This European Standard defines the requirements and test methods applicable to factory applied internal polyurethane high duty corrosion protection of buried ductile iron pipes and fittings conforming to EN 545, EN 598 and EN 969 for use at permanent operating temperatures up to 45 °C

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ISO 49:2001/Amd 1:2018(Amendment)
Malleable cast iron fittings threaded to ISO 7-1 - Chemical composition of the zinc coating - Adjustment to actual requirements regarding hazardous substances
ISO 49:1994/Amd 1:2018
  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12842:2012(Main)
Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods
EN 12842:2012

This European Standard specifies the requirements and associated test methods applicable to ductile iron fittings, ductile iron and mild steel couplings and flange adaptors and their joints to be used with poly(vinyl chloride) (PVC-U) pipes or polyethylene (PE) pipes. It is in conformity with EN 1452-1 to -5, ENV 1452-6 and - 7 and EN 12201-1 to -5 respectively, for the construction of pipelines: - to convey water (e.g. water intended for human consumption); - with or without pressure; - to be installed below or above ground, inside or outside buildings. This European Standard is not intended to cover sewerage applications, where additional requirements may be necessary. This European Standard is applicable to fittings which are: - manufactured with socketed, flanged or spigot ends; - supplied externally and internally coated; - suitable for PE and PVC-U pipes with fluid temperatures between 0°C and 25°C, excluding frost, and for pressures up to 16 bar (PFA). For higher temperatures (up to 45°C for PVC-U or 40°C for PE) the PFA is derated as given in EN 1452 and EN 12201; - not intended for use in areas subjected to reaction to fire regulations. This European Standard covers ductile iron fittings, couplings and flange adaptors cast by any type of foundry process or manufactured by fabrication of cast components, as well as corresponding joints, in a size range extending from DN 60 to DN 700, to be used with pipes of external diameter from 63 mm to 710 mm. As long as no equivalent European Standard exists for mild steel accessories, this European Standard also covers couplings and flange adaptors for use with PVC-U and PE pipes which are fabricated partly or entirely from mild steel as well as corresponding joints, in a size range extending from DN 60 to DN 700, to be used with pipes of external diameter from 63 mm to 710 mm. This European Standard specifies requirements for materials, dimensions and tolerances, mechanical properties and standard coatings. It also gives minimum performance requirements for all components, including restrained and non-restrained flexible joints. Joint design and gasket shapes are outside the scope of this standard. This European Standard does not cover fittings, couplings and flange adaptors intended to be used with different pipe materials other than PVC-U and PE.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 545:2011(Main)
Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
EN 545:2010

This European Standard specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints for the construction of pipelines outside buildings: - to convey different types of water (e.g. raw water, treated water, re-used water) for all types of applications (e.g. water intended for human consumption, for fire protection, for snow making, for irrigation, for hydro-electricity etc.); - with or without pressure; - to be installed below or above ground. This European Standard is applicable to pipes, fittings and accessories which are: - manufactured with socketed, flanged or spigot ends; - supplied externally and internally coated; - suitable for fluid temperatures between 0 °C and 50 °C, excluding frost; - not intended for use in areas subject to reaction to fire regulations. This does not preclude special arrangements for the products to be used at higher temperatures. This European Standard covers pipes and fittings cast by any type of foundry process or manufactured by fabrication of cast components, as well as corresponding joints and accessories, in a size range extending from DN 40 to DN 2 000, inclusive. This European Standard specifies requirements for materials, dimensions and tolerances, mechanical properties and standard coatings of ductile iron pipes and fittings. It also gives performance requirements for all components including joints. Joint design and gasket shapes are outside the scope of this standard. In addition, reference is made to the minimum performance requirements of couplings, flange adaptors and saddles manufactured for use with ductile iron pipes and fittings.

  • Standard
    93 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard + National Annex and/or Foreword
    96 pages
    Foreword and/or annex in Slovenian language, body of the standard in English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 16017:2010(Main)
Guide to the use of EN 598
CEN/TR 16017:2010

EN 598 specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints for the construction of drains and sewers outside buildings:
- operating without pressure (gravity sewerage), or with positive or negative pressure;
- to be installed below or above ground;
- to convey surface water, domestic waste water and certain types of industrial effluents, either in separate systems or in combined systems.
This technical report:
- explains in more detail the process of testing for the performance tests;
- explains in more detail the benefits of high alumina cement lining;
- explains in more detail the definitions of the different types/levels of attestation to enable customers to ensure their requirements are fulfilled;
- explains in more detail the ways of certification of conformity with EN 598 for a reliable evaluation of the performance of products;
- explains in more detail CE marking and its relevance i.e. the CE mark is not a mark of conformity with a standard but only a self-declaration concerning the CPD essential requirements.
In order to make the use of this Technical Report easier, the clauses of this document refer to the
corresponding clause numbers in EN 598.

  • Technical report
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day