SIST EN IEC 60068-2-17:2023

Environmental testing - Part 2-17: Tests - Test Q: Sealing (IEC 60068-2-17:2023)

IEC 60068-2-17:2023 deals with seal tests applicable to the external and internal detection in container sealing of gross leaks and fine leaks to determine the effectiveness of seals of specimens. For further tests to verify the ability of enclosures, covers and seals to maintain components and equipment in good working order, IEC 60068‑2‑18 can be helpful.
This fifth edition cancels and replaces the fourth edition published in 1994. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) "Survey of sealing tests" has been deleted and the relevant content moved to a new Clause 4 "General";
b) the Scope has been revised;
c) the figures have been updated for clarification purposes;
d) all non-SI units have been removed;
e) the information to be given in the relevant specification has been revised.

Umgebungseinflüsse - Teil 2-17: Prüfverfahren - Prüfung Q: Dichtheit (IEC 60068-2-17:2023)

Essais d'environnement - Partie 2-17: Essais - Essai Q: Etanchéité (IEC 60068-2-17:2023)

L'IEC 60068-2-17:2023 traite des essais d'étanchéité relatifs à la détection externe et interne des fuites graves et légères dans l'étanchéité des conteneurs, afin de déterminer l'efficacité des joints des spécimens. Pour les autres essais visant à vérifier l'aptitude des enveloppes, des capots et des joints à maintenir les composants et matériels en bon état de fonctionnement, l'IEC 60068‑2‑18 peut être pertinente.
Cette cinquième édition annule et remplace la quatrième édition parue en 1994. Cette édition constitue une révision technique.
Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) le "Contrôle des essais d'étanchéité" a été supprimé et le contenu correspondant a été déplacé dans un nouvel Article 4 "Généralités";
b) le Domaine d'application a été révisé;
c) les figures ont été mises à jour à des fins de clarification;
d) toutes les unités non SI ont été supprimées;
e) les renseignements à fournir dans la spécification pertinente ont été révisés.

Okoljsko preskušanje - 2-17. del: Preskusi - Preskus Q: Tesnjenje (IEC 60068-2-17:2023)

General Information

• Status: Not Published
• Public Enquiry End Date: 15-Sep-2022
• ICS: 19.040 - Environmental testing
• Technical Committee: I09 - Imaginarni 09
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 20-Sep-2023
• Due Date: 25-Nov-2023
• Ref Project: EN IEC 60068-2-17:2023 - Environmental testing - Part 2-17: Tests - Test Q: Sealing

Relations

• Replaces: SIST EN 60068-2-17:2002 - Environmental testing -- Part 2: Tests - Test Q: Sealing
• Effective Date: 31-Aug-2021

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN IEC 60068-2-17:2022
01-september-2022
Okoljsko preskušanje - 2-17. del: Preskusi - Preskus Q: Tesnjenje
Environmental testing - Part 2-17: Tests - Test Q: Sealing
Essais d'environnement - Partie 2-17: Essais - Essai Q: Etanchéité
Ta slovenski standard je istoveten z: prEN IEC 60068-2-17:2022
ICS:
19.040 Preskušanje v zvezi z Environmental testing
okoljem
oSIST prEN IEC 60068-2-17:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 60068-2-17:2022

---------------------- Page: 2 ----------------------
oSIST prEN IEC 60068-2-17:2022

104/930/CDV

COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60068-2-17 ED5
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-06-24 2022-09-16
SUPERSEDES DOCUMENTS:
104/909/CD, 104/922A/CC

IEC TC 104 : ENVIRONMENTAL CONDITIONS, CLASSIFICATION AND METHODS OF TEST
SECRETARIAT: SECRETARY:
Sweden Mr Henrik Lagerström
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:


Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.

TITLE:
Basic environmental testing procedures - Part 2-17: Tests - Test Q: Sealing

PROPOSED STABILITY DATE: 2027

NOTE FROM TC/SC OFFICERS:


Copyright © 2022 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing National
Committee positions. You may not copy or "mirror" the file or printed version of the document, or any part of it, for
any other purpose without permission in writing from IEC.

---------------------- Page: 3 ----------------------
oSIST prEN IEC 60068-2-17:2022
IEC CDV 60068-2-17 © IEC 2022 2 104/930/CDV

1 CONTENTS
2
3
4 Page
5
6 FOREWORD . 6
7 Survey of sealing tests . 7
8 1 Scope . 8
9 2 Normative references . 8
10 3 Terms and definitions . 8
11 4 Test Qa: Sealing of bushes, spindles and gaskets . 10
12 4.1 Object . 10
13 4.2 Scope . 10
14 4.3 General description of the test . 10
15 4.4 Initial measurements . 10
16 4.5 Conditioning . 10
17 4.6 Final measurements . 10
18 4.7 Information to be given in the relevant specification . 10
19 5 Test Qc: Container sealing, gas leakage . 11
20 5.1 Object . 11
21 5.2 Scope . 11
22 5.3 Gene
...