SIST EN ISO 19715:2017

Dentistry - Filling instrument with contra angle (ISO 19715:2017)

This International Standard specifies requirements and test methods for filling instruments with working ends with contra set, used for the restoration of teeth with plastic filling materials. It also specifies requirements for their design, dimensions and marking.

Zahnheilkunde - Füllinstrumente mit Kontrawinkel (ISO 19715:2017)

Dieses Dokument legt Anforderungen und Prüfverfahren für ein Füllinstrument mit Kontrawinkel fest, das für die Restauration von Zähnen durch die Applikation von Füllungswerkstoffen auf Kunststoffbasis und Zementen verwendet wird. Es legt auch Anforderungen an die Konstruktion, Maße und Kennzeichnung fest.

Médecine bucco-dentaire - Instrument d'obturation à double angulation (ISO 19715:2017)

ISO 19715:2017 spécifie les exigences et méthodes d'essai relatives aux instruments d'obturation à double angulation et qui sont utilisés dans le cadre de restaurations dentaires réalisées par application de produits de restauration à base de polymères et ciments. Il spécifie également des exigences relatives à leur conception, leurs dimensions et leur marquage.

Zobozdravstvo - Instrumenti za polnjenje (ISO 19715:2017)

Ta mednarodni standard določa zahteve in povezane preskusne metode za instrumente za polnjenje z delovnimi konci s proti-naborom, ki se uporabljajo za obnovo zobovja s plastičnimi polnilnimi materiali. Določa tudi zahteve za zasnovo, dimenzije in označevanje.

General Information

• Status: Published
• Public Enquiry End Date: 29-Apr-2016
• Publication Date: 15-Aug-2017
• ICS: 11.060.25 - Dental instruments
• Technical Committee: VAZ - Healthcare
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 09-Jun-2017
• Due Date: 14-Aug-2017
• Completion Date: 16-Aug-2017
• Ref Project: EN ISO 19715:2017 - Dentistry - Filling instrument with contra angle (ISO 19715:2017)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 19715:2017
01-september-2017
Zobozdravstvo - Instrumenti za polnjenje (ISO 19715:2017)
Dentistry - Filling instrument with contra angle (ISO 19715:2017)
Zahnheilkunde - Füllinstrumente mit Kontrawinkel (ISO 19715:2017)
Médecine bucco-dentaire - Instrument d'obturation à double angulation (ISO
19715:2017)
Ta slovenski standard je istoveten z: EN ISO 19715:2017
ICS:
11.060.25 =RERWHKQLþQLLQVWUXPHQWL Dental instruments
SIST EN ISO 19715:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 19715:2017

---------------------- Page: 2 ----------------------

SIST EN ISO 19715:2017


EN ISO 19715
EUROPEAN STANDARD

NORME EUROPÉENNE

May 2017
EUROPÄISCHE NORM
ICS 11.060.20
English Version

Dentistry - Filling instrument with contra angle (ISO
19715:2017)
Médecine bucco-dentaire - Instrument d'obturation à Zahnheilkunde - Füllinstrumente mit Kontrawinkel
double angulation (ISO 19715:2017) (ISO 19715:2017)
This European Standard was approved by CEN on 1 March 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19715:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 19715:2017
EN ISO 19715:2017 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 19715:2017
EN ISO 19715:2017 (E)
European foreword
This document (EN ISO 19715:2017) has been prepared by Technical Committee ISO/TC 106
“Dentistry” in collaboration with Technical Committee CEN/TC 55 “Dentistry” the secretariat of which
is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2017 and conflicting national standards
shall be withdrawn at the latest by November 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 19715:2017 has been approved by CEN as EN ISO 19715:2017 without any modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 19715:2017

---------------------- Page: 6 ----------------------

SIST EN ISO 19715:2017
INTERNATIONAL ISO
STANDARD 19715
First edition
2017-05
Dentistry — Filling instrument with
contra angle
Médecine bucco-dentaire — Instrument d’obturation à double
angulation
Reference number
ISO 19715:2017(E)
©
ISO 2017

---------------------- Page: 7 ----------------------

SIST EN ISO 19715:2017
ISO 19715:2017(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2017 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 19715:2017
ISO 19715:2017(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Classification . 2
5 Requirements . 4
5.1 Dimensions . 4
5.2 Dimensions of working end . 4
5.3 Materials . 5
5.4 Surface finish . 5
5.5 Handle. 5
5.6 Designation and combination of working ends . 5
5.7 Resistance to reprocessing . 5
6 Measurement and test methods . 6
6.1 Dimensions . 6
6.2 Hardness testing . 6
6.3 Surface roughness inspection . 6
6.4 Resistance to reprocessing test . 6
7 Marking . 6
Annex A (informative) Designation and combinations of working ends . 7
Bibliography . 9
© ISO 2017 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 19715:2017
ISO 19715:2017(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
...