Electromagnetic Compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Rules for Access and the Sharing of common used channels by equipment complying with EN 300 113; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive

To draft an EN to be harmonized under the R&TTE Directive, corresponding to ETS 300 471

Elektromagnetna združljivost in zadeve v zvezi z radijskim spektrom (ERM) - Pravila za dostopanje in souporabo skupno uporabljanih kanalov s pomočjo opreme, ki ustreza EN 300 113 - 2. del: Harmonizirani evropski standard (EN), ki zajema bistvene zahteve člena 3.2 direktive o radijski in telekomunikacijski terminalski opremi (R&TTE)

General Information

Status
Published
Publication Date
30-Nov-2001
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Dec-2001
Due Date
01-Dec-2001
Completion Date
01-Dec-2001
Mandate

Buy Standard

Standard
EN 300 471-2:2001
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 300 471-2:2001
01-december-2001
(OHNWURPDJQHWQD]GUXåOMLYRVWLQ]DGHYHY]YH]L]UDGLMVNLPVSHNWURP (50 
3UDYLOD]DGRVWRSDQMHLQVRXSRUDERVNXSQRXSRUDEOMDQLKNDQDORYVSRPRþMR
RSUHPHNLXVWUH]D(1GHO+DUPRQL]LUDQLHYURSVNLVWDQGDUG (1 NL
]DMHPDELVWYHQH]DKWHYHþOHQDGLUHNWLYHRUDGLMVNLLQWHOHNRPXQLNDFLMVNL
WHUPLQDOVNLRSUHPL 5 77(
Electromagnetic Compatibility and Radio spectrum Matters (ERM); Land Mobile Service;
Rules for Access and the Sharing of common used channels by equipment complying
with EN 300 113; Part 2: Harmonized EN covering essential requirements under article
3.2 of the R&TTE Directive
Ta slovenski standard je istoveten z: EN 300 471-2 Version 1.1.1
ICS:
33.060.99 Druga oprema za radijske Other equipment for
komunikacije radiocommunications
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
SIST EN 300 471-2:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 300 471-2:2001

---------------------- Page: 2 ----------------------

SIST EN 300 471-2:2001
ETSI EN 300 471-2 V1.1.1 (2001-05)
Candidate Harmonized European Standard (Telecommunications series)
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Land Mobile Service;
Rules for Access and the Sharing of common used channels
by equipment complying with EN 300 113;
Part 2: Harmonized EN covering essential requirements
under article 3.2 of the R&TTE Directive

---------------------- Page: 3 ----------------------

SIST EN 300 471-2:2001
2 ETSI EN 300 471-2 V1.1.1 (2001-05)
Reference
REN/ERM-RP02-049-2
Keywords
EMC, mobile, PMR, radio, regulation, service
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33492 94 4200 Fax: +33493 65 4716
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at http://www.etsi.org/tb/status/
If you find errors in the present document, send your comment to:
editor@etsi.fr
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2001.
All rights reserved.
ETSI

---------------------- Page: 4 ----------------------

SIST EN 300 471-2:2001
3 ETSI EN 300 471-2 V1.1.1 (2001-05)
Contents
Intellectual Property Rights .4
Foreword.4
Introduction.5
1 Scope.8
2 References.9
3 Definitions and abbreviations.10
3.1 Definitions . 10
3.2 Abbreviations. 10
4 Technical specifications.10
4.1 Void. 10
4.2 Technical requirements. 10
4.2.1 Carrier sense delay. 10
4.2.1.1 Definition. 10
4.2.1.2 Limit. 10
4.2.1.3 Assessment of conformity. 10
4.2.2 Receiver opening delay . 10
4.2.2.1 Definition. 10
4.2.2.2 Limit. 10
4.2.2.3 Assessment of conformity. 10
4.2.3 Other requirements concerning timings . 11
4.2.3.1 Other timing parameters. 11
4.2.3.2 Limit. 11
4.2.3.3 Assessment of conformity. 11
4.2.4 Protocol elements. 11
4.2.4.1 Definition of the protocol and nominal values. . 11
4.2.4.2 Assessment of conformity. 11
5 Testing for compliance with technical requirements .11
5.1 Void. 11
5.2 Interpretation of the measurement results. 11
5.3 Essential radio test suites . 12
5.3.1 Carrier sense delay. 12
5.3.2 Receiver opening delay . 12
5.3.3 Other requirements concerning timings . 12
5.3.4 Protocol elements. 13
Annex A (normative): The EN Requirements Table (EN-RT).14
History .15
ETSI

---------------------- Page: 5 ----------------------

SIST EN 300 471-2:2001
4 ETSI EN 300 471-2 V1.1.1 (2001-05)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://www.etsi.org/ipr).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Candidate Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical
Committee Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document is part 2 of a multi-part deliverable covering the Land Mobile Service; Rules for Access and the
Sharing of common used channels by equipment complying with 300 113, as identified below:
Part 1: "Technical characteristics and methods of measurement";
Part 2: "Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive".
The present document has been produced by ETSI in response to a mandate from the European Commission issued
under Council Directive 98/34/EC [4] (as amended) laying down a procedure for the provision of information in the
field of technical standards and regulations.
The present document is intended to become a Harmonized Standard, the reference of which will be published in the
Official Journal of the European Communities referencing the Directive 1999/5/EC [1] of the European Parliament and
of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual
recognition of their conformity ("the R&TTE Directive").
National transposition dates
Date of adoption of this EN: 27 April 2001
Date of latest announcement of this EN (doa): 31 July 2001
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 January 2003
Date of withdrawal of any conflicting National Standard (dow): 31 January 2003
ETSI

---------------------- Page: 6 ----------------------

SIST EN 300 471-2:2001
5 ETSI EN 300 471-2 V1.1.1 (2001-05)
Introduction
The present document specifies an access protocol and occupation rules for data communications on radio channels
shared by different users. It may be used for data communications over channels originally intended for speech use.
This standard gives freedom for the use of any bit rate, any constant envelope modulation or any type of protocol which
fulfils the normative parameters of the present document to access a shared radio channel.
The access protocol specified in the present document also permits the sharing of speech and data communication.
The present document is part of a set of standards designed to fit in a modular structure to cover all radio and
telecommunications terminal equipment under the R&TTE Directive [1].
Each standard is a module in the structure. The modular structure is shown in figure 1.
ETSI

---------------------- Page: 7 ----------------------

SIST EN 300 471-2:2001
6 ETSI EN 300 471-2 V1.1.1 (2001-05)
Disability*
3.3f
Emergency*
3.3e
Fraud*
3.3d
3.3c
Privacy*
No harm to the network*
3.3b
* If needed
Scoped by
Interworking via the network*
equipment
3.3a class or type
Interworking with the network
Use of spectrum
3.2
New radio harmonized standards
Spectrum
Scoped by frequency and/or equipment type
Radio Product EMC
Existing EMC standards to be replaced
by a new, single, multi-part standard
3.1b
EMC
Generic and product standards also notified under EMC Directive
If needed, new standards for human exposure to
Electromagnetic Fields,
if needed, new standards for acoustic safety
3.1a
Standards also notified under LV Directive
Safety
Non-radio Radio (RE)
TTE Non-TTE
Figure 1: Modular structure for the various standards used under the R&TTE Directive [1]
ETSI

---------------------- Page: 8 ----------------------

SIST EN 300 471-2:2001
7 ETSI EN 300 471-2 V1.1.1 (2001-05)
Explanation of figure 1
The left hand edge of the figure 1 shows the different clauses of article 3 of the R&TTE Directive [1].
For article 3.3 various horizontal boxes are shown. Dotted lines indicate that at the time of publication of this standard,
essential requirements in these areas have to be adopted by the Commission. If such essential requirements are adopted,
and as far and as long as they are applicable, they will justify individual standards whose scope is likely to be specified
by function or interface type.
The vertical boxes show the standards under article 3.2 for the use of the radio spectrum by radio equipment.
For article 3.1b the diagram shows the new single multi-part product EMC standard for radio, and the existing collection
of generic and product standards currently used under the EMC Directive [2]. The parts of this new standard will
become available in the second half of 2000, and the existing separate product EMC standards will be used until it is
available (at the time of publication of the present document, the part relating to the equipment covered by the present
document is part 5).
For article 3.1a the diagram shows the existing safety standards currently used under the LV Directive [3] and new
standards covering human exposure to electromagnetic fields. New standards covering acoustic safety may also be
required.
The bottom of the figure shows the relationship of the standards to radio equipment and telecommunications terminal
equipment. A particular equipment may be radio equipment, telecommunications terminal equipment or both. One or
several radio spectrum standards will apply if it is radio equipment. An article 3.3 standard will apply as well only if the
relevant essential requirement under the R&TTE Directive [1] is adopted by the Commission and if the equipment in
question is covered by the scope of the corresponding standard. Thus, depending on the nature of the equipment, the
essential requirements under the R&
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.