SIST EN 15720:2010
(Main)Sanitary appliances - Shower trays made from impact modified coextruded ABS/acrylic sheets - Requirements and test methods
Sanitary appliances - Shower trays made from impact modified coextruded ABS/acrylic sheets - Requirements and test methods
This European Standard specifies the requirements for shower trays for domestic purposes made from crosslinked cast acrylic sheets conforming to EN 13559 with the aim of ensuring that the product, when installed in accordance with the manufacturer's instructions, will provide satisfactory performance in use. This European Standard is applicable to all sizes and shapes of shower trays.
Sanitärausstattungsgegenstände - Duschwannen, hergestellt aus schlagzäh-modifizierten coextrudierten ABS/Acrylplatten - Anforderungen und Prüfverfahren
Diese Europäische Norm legt Anforderungen an Duschwannen für den Hausgebrauch, hergestellt aus
schlagzäh-modifizierten coextrudierten ABS/Acrylplatten entsprechend EN 13559, fest, mit dem Ziel sicherzustellen,
dass das nach den Einbauanweisungen des Herstellers eingebaute Produkt eine zufrieden stellende
Gebrauchstauglichkeit aufweist.
Diese Europäische Norm ist auf alle Größen und Formen von Duschwannen anwendbar.
Appareils sanitaires - Receveurs de douche en feuilles d'ABS/acrylique coextrudées modifiées choc - Exigences et méthodes d'essai
La présente Norme européenne spécifie les prescriptions applicables aux receveurs de douche à usage domestique en feuilles coextrudées ABS/acrylique modifié choc conformes à l'EN 13559 afin de s'assurer qu’une fois le produit installé conformément aux instructions du fabricant ses performances seront satisfaisantes.
La présente Norme européenne est applicable aux receveurs de douche de toutes les dimensions et de toutes les formes.
Sanitarne naprave - Kadi za prhanje, izdelane iz udarno modificiranih koekstrudiranih ABS/akrilnih plošč - Zahteve in preskusne metode
Ta evropski standard opredeljuje zahteve za kadi za prhanje za domačo uporabo iz zamreženih litih akrilnih plošč, ki so v skladu z EN 13559, z namenom zagotavljanja, da proizvod, kadar je nameščen v skladu z navodili proizvajalca, nudi zadovoljivo delovanje. Ta evropski standard velja za vse velikosti in oblike kadi za prhanje.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.DQLKSanitärausstattungsgegenstände - Duschwannen, hergestellt aus schlagzäh-modifizierten coextrudierten ABS/Acrylplatten - Anforderungen und PrüfverfahrenAppareils sanitaires - Receveurs de douche en feuilles d'ABS/acrylique coextrudées modifiées choc - Exigences et méthodes d'essaiSanitary appliances - Shower trays made from impact modified coextruded ABS/acrylic sheets - Requirements and test methods91.140.70Sanitarne napraveSanitary installationsICS:Ta slovenski standard je istoveten z:EN 15720:2009SIST EN 15720:2010en,fr,de01-marec-2010SIST EN 15720:2010SLOVENSKI
STANDARD
SIST EN 15720:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15720
December 2009 ICS 91.140.70 English Version
Sanitary appliances - Shower trays made from impact modified coextruded ABS/acrylic sheets - Requirements and test methods Appareils sanitaires - Receveurs de douche en feuilles d'ABS/acrylique coextrudées modifiées choc - Exigences et méthodes d'essai
Sanitärausstattungsgegenstände - Duschwannen, hergestellt aus schlagzäh-modifizierten coextrudierten ABS/Acrylplatten - Anforderungen und Prüfverfahren This European Standard was approved by CEN on 7 November 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15720:2009: ESIST EN 15720:2010
EN 15720:2009 (E) 2 Contents Page Foreword .31 Scope .42 Normative references .43 Terms and definitions .44 Requirements .44.1 General .44.2 Material .44.3 Surface appearance .44.4 Waste outlet hole .44.5 Overflow hole .54.6 Hole edges .54.7 Dimensional deviations .54.8 Geometric deviations .54.8.1 General .54.8.2 Squaring .54.8.3 Straightness of the rim sides .54.8.4 Straightness of the bottom edge of the rim .54.8.5 Flatness of the top surface of rim .54.9 Bottom of the shower tray .54.10 Resistance to temperature changes .64.11 Resistance to impact .64.12 Permitted deflections .64.13 Shower tray rim .65 Marking .6Annex A (normative)
Shower tray test methods .7A.1 Sequence of tests .7A.2 Geometric deviations .7A.2.1 Test apparatus .7A.2.2 Squaring .7A.2.3 Straightness of the rim side .8A.2.4 Straightness of the bottom edge of the rim .9A.2.5 Flatness of the top surface of the rim. 10A.3 Resistance to temperature change . 11A.3.1 Test apparatus . 11A.3.2 Procedure . 11A.4 Resistance to impact . 12A.4.1 Test apparatus . 12A.4.2 Procedure . 12A.5 Determination of deflections . 12A.5.1 General . 12A.5.2 Test apparatus . 13A.5.3 Preloading . 13A.5.4 Deflection test 1 - Deflection of the rim and the bottom due to a load on the bottom . 14A.5.5 Deflection test 2 - Deflection of the rim due to a load on the rim on the side of entry . 15Bibliography . 18 SIST EN 15720:2010
EN 15720:2009 (E) 3 Foreword This document (EN 15720:2009) has been prepared by Technical Committee CEN/TC 163 “Sanitary appliances”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2010, and conflicting national standards shall be withdrawn at the latest by June 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. Attention is drawn to EN 14527 [1], which has been prepared under the Mandate M/110 “Sanitary Appliances” which was given to CEN by the European Commission and the European Free Trade Association and supports the Essential Requirements to allow CE marking under Construction Products Directive (89/106/EEC). According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 15720:2010
EN 15720:2009 (E) 4 1 Scope This European Standard specifies the requirements for shower trays for domestic purposes made from crosslinked cast acrylic sheets conforming to EN 13559 with the aim of ensuring that the product, when installed in accordance with the manufacturer’s instructions, will provide satisfactory performance in use. This European Standard is applicable to all sizes and shapes of shower trays. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 13559, Specifications for impact modified coextruded ABS/Acrylic sheets for baths and shower trays for domestic purposes 3 Terms and definitions
For the purposes of this document, the following terms and definitions apply. 3.1 domestic purposes use in homes, hotels, accommodation for students, hospitals and similar buildings, except when special medical provisions are required 4 Requirements 4.1 General The manufacturer shall provide instructions for installation and care with each shower tray. The shower tray shall be free from sharp edges that would be exposed after the installation of the shower tray in accordance with the manufacturer’s instructions. 4.2 Material The shower tray shall be manufactured from impact modified coextruded ABS/acrylic sheets complying with
EN 13559. 4.3 Surface appearance When the shower tray is visually inspected under strong and oblique illumination there shall be no evidence of cracks, chips, or other surface defects, such as unexpected changes in colours, etc. that will impair the appearance or performance of the shower tray. 4.4 Waste outlet hole The shower tray shall have at least one outlet hole. The dimensions of the waste outlet hole and the clearance around the waste outlet hole shall either be in accordance with the requirements of EN 251 or the manufacturer shall supply or recommend a suitable waste outlet fitting. SIST EN 15720:2010
EN 15720:2009 (E) 5 4.5 Overflow hole When the shower tray is provided with an overflow hole the dimensions of the overflow hole and the clearance around the overflow hole shall either be in accordance with the requirements of EN 251 or the manufacturer shall supply or recommend a suitable overflow fitting. 4.6 Hole edges The edges of any holes in the shower tray shall not show evidence of chips, cracks, or any other defects that may impair the appearance or performance of the shower tray. 4.7 Dimensional deviations The dimensions of shower trays shall not deviate from the size quoted by the manufacturer by greater than
± 5 mm. If the manufacturer states two sizes (e.g. both a work size and a nominal size) he shall state to which size the permitted deviations apply. For round shower trays, length and width correspond to the diameter. 4.8 Geometric deviations 4.8.1 General The straight sides or edges of the shower tray that might abut independent surroundings or supporting structures shall comply with the requirements of 4.8.2 to 4.8.4 and all shower trays shall comply with 4.8.5. These requirements are not applicable to sides or edges that are purposely designed as curves or slopes. 4.8.2 Squaring When tested in accordance with A.2.2 the deviation from square, ∆q, shall be less than or equal to 5 mm. 4.8.3 Straightness of the rim sides When tested in accordance with A.2.3 the deviation from straightness of the rim sides, ∆s, shall be less than or equal to 5
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.