SIST TBR 040 E1:2004
(Main)Digital Enhanced Cordless Telecommunications (DECT); Integrated Services Digital Network (ISDN); Attachment requirements for terminal equipment for DECT/ISDN interworking profile applications
Digital Enhanced Cordless Telecommunications (DECT); Integrated Services Digital Network (ISDN); Attachment requirements for terminal equipment for DECT/ISDN interworking profile applications
To define the TBR for DECT/ISDN portables with the aim of achieving inter-operability between DECT/ISDN portables and GAP or GSM infrastructure. To investigate which additional essential requirements to TBR 022 have to be considered for type approval of DECT/ISDN portables. Deliverable = TBR or Harmonised standard for DECT/ISDN.
Digitalne izboljšane brezvrvične telekomunikacije (DECT) - Digitalno omrežje z integriranimi storitvami (ISDN) - Priključitvene zahteve za terminalsko opremo za uporabo pri profilu medsebojnega delovanja DECT/ISDN
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST TBR 040 E1:2004
01-oktober-2004
'LJLWDOQHL]EROMãDQHEUH]YUYLþQHWHOHNRPXQLNDFLMH '(&7 'LJLWDOQRRPUHåMH]
LQWHJULUDQLPLVWRULWYDPL ,6'1 3ULNOMXþLWYHQH]DKWHYH]DWHUPLQDOVNRRSUHPR]D
XSRUDERSULSURILOXPHGVHERMQHJDGHORYDQMD'(&7,6'1
Digital Enhanced Cordless Telecommunications (DECT); Integrated Services Digital
Network (ISDN); Attachment requirements for terminal equipment for DECT/ISDN
interworking profile applications
Ta slovenski standard je istoveten z: TBR 040 Edition 1
ICS:
33.070.30 'LJLWDOQHL]EROMãDQH Digital Enhanced Cordless
EUH]YUYLþQHWHOHNRPXQLNDFLMH Telecommunications (DECT)
'(&7
SIST TBR 040 E1:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST TBR 040 E1:2004
---------------------- Page: 2 ----------------------
SIST TBR 040 E1:2004
TECHNICAL TBR 40
BASIS for June 1998
REGULATION
Source: DECT Reference: DTBR/DECT-030061
ICS: 33.020
Key words: DECT, ISDN, radio, terminal, type approval
Digital Enhanced Cordless Telecommunications (DECT);
Integrated Services Digital Network (ISDN);
Attachment requirements for terminal equipment for
DECT/ISDN interworking profile applications
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
Postal address: F-06921 Sophia Antipolis CEDEX - FRANCE
Office address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
Internet: secretariat@etsi.fr - http://www.etsi.fr - http://www.etsi.org
Tel.: +33 4 92 94 42 00 - Fax: +33 4 93 65 47 16
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1998. All rights reserved.
---------------------- Page: 3 ----------------------
SIST TBR 040 E1:2004
Page 2
TBR 40: June 1998
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Standards Making Support Dept." at the address shown on the title page.
---------------------- Page: 4 ----------------------
SIST TBR 040 E1:2004
Page 3
TBR 40: June 1998
Contents
Foreword .7
1 Scope .9
2 Normative references.10
3 Definitions and abbreviations .12
3.1 Definitions .12
3.2 Abbreviations .12
4 How to use the present document .13
5 Requirements for DECT/ISDN interworking for end system configuration .13
5.1 Interworking Unit (IWU) features .14
5.2 Network (NWK) layer features.15
5.3 DLC layer services.16
5.4 MAC layer services .16
5.5 Physical (PH) layer requirements .16
6 Test specification for DECT/ISDN interworking for end system configuration.17
6.1 PP .17
6.1.1 IWU layer.17
6.1.1.1 Test suite structure.17
6.1.1.2 Test case index .17
6.1.2 NWK layer .18
6.1.2.1 Test suite structure.18
6.1.2.2 Test case index .19
6.1.3 DLC layer.20
6.1.3.1 Test suite structure.20
6.1.3.2 Test case index .21
6.1.4 MAC layer.24
6.1.4.1 Test suite structure.24
6.1.4.2 Test case index .25
6.1.5 PH layer.26
6.2 FP .26
6.2.1 IWU layer.26
6.2.1.1 Test suite structure.26
6.2.1.2 Test case index .28
6.2.2 NWK layer .34
6.2.2.1 Test suite structure.34
6.2.2.2 Test case index .35
6.2.3 DLC layer.36
6.2.3.1 Test suite structure.36
6.2.3.2 Test case index .37
6.2.4 MAC layer.39
6.2.4.1 Test suite structure.39
6.2.4.2 Test case index .41
6.2.5 PH layer.42
Annex A (normative): Requirements Tables (RT) for DECT/ISDN interworking for end system
configuration.43
A.1 Introduction.43
A.2 PP.44
A.2.1 Tables for PP IWU layer .44
---------------------- Page: 5 ----------------------
SIST TBR 040 E1:2004
Page 4
TBR 40: June 1998
A.2.1.1 IWU features. 44
A.2.1.2 IWU procedures. 44
A.2.2 Tables for PP NWK layer . 45
A.2.2.1 Entities . 45
A.2.2.2 Features. 45
A.2.2.2.1 CC features. 45
A.2.2.2.2 LCE features . 45
A.2.2.3 Procedures . 46
A.2.2.3.1 CC procedures. 46
A.2.2.3.2 Additional IWU CC procedures. 46
A.2.2.3.3 SS protocols. 46
A.2.2.3.4 LCE procedures . 47
A.2.2.4 Messages . 47
A.2.2.4.1 Call control messages. 47
A.2.2.4.2 CRSS and CISS messages . 48
A.2.2.4.3 LCE messages. 48
A.2.3 Tables for PP DLC layer.49
A.2.3.1 Services . 49
A.2.3.1.1 C-plane Services. 49
A.2.3.1.2 U-plane Services. 49
A.2.3.2 Procedures . 49
A.2.3.2.1 Generic signalling procedures . 49
A.2.3.2.2 Additional DLC procedures . 50
A.2.3.2.3 Class A procedures. 50
A.2.3.2.4 Broadcast procedures. 50
A.2.3.2.5 LU1 procedures . 50
A.2.3.2.6 LU7 procedures . 51
A.2.3.2.7 Management procedures. 52
A.2.3.3 Parameters . 52
A.2.3.3.1 LU1 parameters . 52
A.2.3.3.2 LU7 parameters . 53
A.2.3.4 Messages . 53
A.2.3.4.1 C-plane PDUs . 53
A.2.4 Tables for PP MAC layer. 53
A.2.4.1 Services . 53
A.2.4.1.1 Connection oriented control services. 53
A.2.4.1.2 Broadcast control services. 54
A.2.4.1.3 Multiplexing services. 55
A.2.4.1.4 Management services. 56
A.2.4.2 Procedures . 56
A.2.4.2.1 Connection setup procedures . 56
A.2.4.2.2 Connection data transfer procedures. 57
A.2.4.2.3 Connection release procedures . 57
A.2.4.2.4 Broadcast procedures. 57
A.2.4.2.5 CSF multiplexing procedures. 57
A.2.4.2.6 Layer management procedures. 58
A.2.4.3 Other capabilities . 58
A.2.4.4 Protocol parameters . 58
A.2.4.4.1 Timer support. 58
A.2.4.4.2 Channel selection parameters . 58
A.2.4.4.3 Slot types supported . 58
A.2.4.5 Messages . 59
A.2.4.5.1 A - field header - tail identification. 59
A.2.4.5.2 A - field header - B-field identification . 59
A.2.4.5.3 A - field header - "Q2" bit . 59
A.2.4.5.4 A - field identities information (N ) message. 60
T
A.2.4.5.5 A - field system information (Q ) messages. 60
T
A.2.4.5.6 A - field paging tail (P ) messages. 60
T
A.2.4.5.7 A - field MAC control (M ) messages. 60
T
A.2.4.5.8 B-field messages supported . 61
A.2.4.6 MAC messages format and field value. 63
A.2.4.6.1 QT - fixed part capability . 63
A.2.5 Tables for PP PH layer. 64
---------------------- Page: 6 ----------------------
SIST TBR 040 E1:2004
Page 5
TBR 40: June 1998
A.2.5.1 Services.64
A.2.5.2 Physical layer procedures .64
A.2.5.3 Protocol data units.65
A.2.5.4 Transmitter characteristics.65
A.2.5.5 Receiver characteristics .65
A.3 FP.66
A.3.1 Tables for FP IWU layer .66
A.3.1.1 IWU features .66
A.3.1.2 IWU procedures .66
A.3.1.3 IWU messages mapping.68
A.3.2 Tables for FP NWK layer.72
A.3.2.1 Entities.72
A.3.2.2 Features .72
A.3.2.2.1 CC features .72
A.3.2.2.2 LCE features.72
A.3.2.3 Procedures.73
A.3.2.3.1 CC procedures .73
A.3.2.3.2 Additional IWU CC procedures.73
A.3.2.3.3 SS protocols .73
A.3.2.3.4 LCE procedures.74
A.3.2.4 Messages.74
A.3.2.4.1 Call control messages .74
A.3.2.4.2 CRSS and CISS messages.75
A.3.2.4.3 Link control entity messages .75
A.3.3 Tables for FP DLC layer .75
A.3.3.1 Services.75
A.3.3.1.1 C-plane Services .76
A.3.3.1.2 U-plane Services .76
A.3.3.2 Procedures.76
A.3.3.2.1 Generic signalling procedures .76
A.3.3.2.2 Additional DLC procedures.76
A.3.3.2.3 Class A procedures .77
A.3.3.2.4 Broadcast procedures .77
A.3.3.2.5 LU1 procedures .77
A.3.3.2.6 LU7 procedures .77
A.3.3.2.7 Management procedures.78
A.3.3.3 Parameters.79
A.3.3.3.1 LU1 parameters.79
A.3.3.3.2 LU7 parameters.79
A.3.3.4 Messages.79
A.3.3.4.1 C-plane PDUs.79
A.3.4 Tables for FP MAC layer.80
A.3.4.1 Services.80
A.3.4.1.1 Connection oriented control services .80
A.3.4.1.2 Broadcast control services .81
A.3.4.1.3 Multiplexing services.81
A.3.4.1.4 Management services .82
A.3.4.2 Procedures.82
A.3.4.2.1 Connection setup procedures.82
A.3.4.2.2 Connection data transfer procedures .83
A.3.4.2.3 Connection release procedures.83
A.3.4.2.4 Broadcast procedures .83
A.3.4.2.5 CSF multiplexing procedures .83
A.3.4.2.6 Layer management procedures.84
A.3.4.3 Protocol parameters.84
A.3.4.3.1 Timer support .84
A.3.4.3.2 Channel selection parameters.84
A.3.4.3.3 Slot types supported .84
A.3.4.4 Messages.85
A.3.4.4.1 A - field header - tail identification.85
A.3.4.4.2 A - field header - B-field identification.85
A.3.4.4.3 A - field header - "Q2" bit.85
---------------------- Page: 7 ----------------------
SIST TBR 040 E1:2004
Page 6
TBR 40: June 1998
A.3.4.4.4 A - field identities information (N ) message. 86
T
A.3.4.4.5 A - field system information (Q ) messages. 86
T
A.3.4.4.6 A - field paging tail (P ) messages. 86
T
A.3.4.4.7 A - field MAC control (M ) messages. 86
T
A.3.4.5.8 B-field messages supported . 87
A.3.4.5 MAC messages format and field value. 89
A.3.4.5.1 QT - fixed part capability . 89
A.3.5 Tables for FP PH layer. 90
A.3.5.1 Services . 90
A.3.5.2 Physical layer procedures. 90
A.3.5.3 Protocol Data Units. 91
A.3.5.4 Transmitter characteristics . 91
A.3.5.5 Receiver characteristics. 91
Annex B (informative): Bibliography . 92
History. 93
---------------------- Page: 8 ----------------------
SIST TBR 040 E1:2004
Page 7
TBR 40: June 1998
Foreword
This Technical Basis for Regulation (TBR) has been produced by the Digital Enhanced Cordless
Telecommunications (DECT) Project of the European Telecommunications Standards Institute (ETSI).
The present document has been produced by ETSI in response to a mandate from the European
Commission issued under Council Directive 83/189/EEC (as amended) laying down a procedure for the
provision of information in the field of technical standards and regulations.
The present document is intended to become a Harmonized Standard as requested by the above
mentioned mandate, the reference of which will be published in the Official Journal of the European
Communities referencing the Council Directive relating to telecommunications terminal equipment and
satellite earth station equipment, including the mutual recognition of their conformity (Directive 98/13/EC).
A common technical regulation may be established by the European Commission in accordance with the
Directive.
Technical specifications relevant to the 98/13/EC Directive are given in the TBR-Requirements Table
(TBR-RT) in annex A.
---------------------- Page: 9 ----------------------
SIST TBR 040 E1:2004
Page 8
TBR 40: June 1998
Blank page
---------------------- Page: 10 ----------------------
SIST TBR 040 E1:2004
Page 9
TBR 40: June 1998
1 Scope
The present document specifies the technical characteristics to be provided by terminal equipment which
is capable of connection to an Integrated Services Digital Network (ISDN) and which uses Digital
European Cordless Telecommunications (DECT) for network access. The cordless transmissions for such
terminal equipment operate within the frequency band 1 880 MHz to 1 900 MHz.
A DECT terminal equipment comprises two elements, referred to as a Fixed Part (FP) and a
Portable Part (PP). The objective of the present document is to ensure air-interface interoperability
between a FP and PP following the DECT/ISDN Interworking Profile (IWP) (see note 2), where these
parts are capable of 3,1 kHz telephony applications, and where the FP is connected to the ISDN in order
to provide ISDN services (according to TBR 3 [34] and TBR 4 [35]), over the DECT air interface.
For functional parts of a FP, that are terminal equipment and which are declared to conform to the basic
Common Technical Regulations (CTRs) for DECT (see note 1) and to the DECT/ISDN IWP, the
requirements of the present document shall apply, in addition to the attachment requirements for the
appropriate ISDN.
The requirements of the present document are also applicable for the complete set of functionality of a PP
declared to conform to the DECT/ISDN IWP. For a PP, the present document is in addition to the basic
CTRs for DECT (see note 1).
Where a feature is indicated as optional it need not be provided, but where such a feature is provided, the
FP and/or PP shall conform to the requirements and tests of the present document. The present
document is structured to allow type approval of the FP and PP as separate items. For each requirement
in the present document, a test is given, including measurement methods where applicable. The terminal
equipment may be stimulated to perform the tests by additional equipment if necessary.
The present document does not apply to FPs where they form a part of the ISDN.
The present document consists of two parts (A and B) referring to the end system configuration and
intermediate system configuration respectively, were the part B (intermediate system configuration) is
expected to be amended at a later stage.
NOTE 1: The basic CTRs for DECT are the general attachment requirements (CTR 6),
requirements for telephony applications (CTR 10) and requirements for Generic
Access Profile (GAP) (CTR 22). These CTRs are derived from their respective TBRs
(TBR 6 [36], TBR 10 [37], and TBR 22 [38]).
NOTE 2: In the respect of the present document, the DECT/ISDN IWP is based on the provision
of access mappings/interworking requirements of the end system configuration
(EN 300 434-1 [9] and EN 300 434-2 [10]) and of the intermediate system
configuration (ETS 300 822 [33]).
NOTE 3: The DECT/ISDN IWP consists of two separate standards, the "end system
configuration" (EN 300 434-1 [9] and EN 300 434-2 [10]) and the "intermediate system
configuration" (ETS 300 822 [33]). The end system configuration describes how ISDN
services are offered via a DECT radio interface, when the ISDN is terminated in the
DECT FP. The intermediate system configuration describes how ISDN is provided
over DECT radio interface, with a regenerated ISDN "S" interface in the DECT PP.
---------------------- Page: 11 ----------------------
SIST TBR 040 E1:2004
Page 10
TBR 40: June 1998
2 Normative references
This TBR incorporates, by dated or undated reference, provisions from other publications. These
normative references are cited at the appropriate places in the text and the publications are listed
hereafter. For dated references, subsequent amendments to or revisions of any of these publications
apply to this TBR only when incorporated in it by amendment or revision. For undated references the
latest edition of the publication referred to applies.
[1] EN 300 175-1: "Digital Enhanced Cordless Telecommunications (DECT);
Common Interface (CI); Part 1: Overview".
[2] EN 300 175-2: "Digital Enhanced Cordless Telecommunications (DECT);
Common Interface (CI); Part 2: Physical layer (PHL)".
[3] EN 300 175-3: "Digital Enhanced Cordless Telecommunications (DECT);
Common Interface (CI); Part 3: Medium Access Control (MAC) layer".
[4] EN 300 175-4: "Digital Enhanced Cordless Telecommunications (DECT);
Common Interface (CI); Part 4: Data Link Control (DLC) layer".
[5] EN 300 175-5: "Digital Enhanced Cordless Telecommunications (DECT);
Common Interface (CI); Part 5: Network (NWK) layer".
[6] EN 300 175-6: "Digital Enhanced Cordless Telecommunications (DECT);
Common Interface (CI); Part 6: Identities and addressing".
[7] EN 300 175-7: "Digital Enhanced Cordless Telecommunications (DECT);
Common Interface (CI); Part 7: Security features".
[8] EN 300 175-8: "Digital Enhanced Cordless Telecommunications (DECT);
Common Interface (CI); Part 8: Speech coding and transmission".
[9] EN 300 434-1: "Digital Enhanced Cordless Telecommunications (DECT);
Integrated Services Digital Network (ISDN); DECT/ISDN interworking for end
system configuration; Part 1: Interworking specification".
[10] EN 300 434-2: "Digital Enhanced Cordless Telecommunications (DECT);
Integrated Services Digital Network (ISDN); DECT/IDSN interworking for end
system configuration; Part 2: Access profile".
[11] EN 300 444: "Digital European Cordless Telecommunications (DECT); Generic
Access Profile (GAP)".
[12] ETS 300 476-1: "Digital Enhanced Cordless Telecommunications (DECT);
Common Interface (CI); Protocol Implementation Conformance Statement
(PICS) proforma; Part 1: Network (NWK) layer - Portable radio Termination
(PT)".
[13] ETS 300 476-2: "Digital Enhanced Cordless Telecommunications (DECT);
Common Interface (CI); Protocol Implementation Conformance Statement
(PICS) proforma; Part 2: Data Link Control (DLC) layer - Portable radio
Termination (PT)".
[14] ETS 300 476-3:
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.