SIST-V ETSI/EG 201 788 V2.2.1:2025
(Main)Electromagnetic compatibility and Radio spectrum Matters (ERM) - Guidance for drafting an ETSI System Reference document (SRdoc)
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Guidance for drafting an ETSI System Reference document (SRdoc)
REG/ERM-RM-282
Elektromagnetna združljivost in zadeve v zvezi z radijskim spektrom (ERM) - Usmeritve za sestavljanje sistemskega referenčnega dokumenta ETSI (SRdoc)
General Information
Standards Content (Sample)
Final draft ETSI EG 201 788 V2.2.0 (2024-11)
ETSI GUIDE
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Guidance for drafting an
ETSI System Reference document (SRdoc)
2 Final draft ETSI EG 201 788 V2.2.0 (2024-11)
Reference
REG/ERM-RM-282
Keywords
radio, SRdoc, system
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from the
ETSI Search & Browse Standards application.
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format on ETSI deliver.
Users should be aware that the present document may be revised or have its status changed,
this information is available in the Milestones listing.
If you find errors in the present document, please send your comments to
the relevant service listed under Committee Support Staff.
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure (CVD) program.
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
No representation or warranty is made that this deliverable is technically accurate or sufficient or conforms to any law
and/or governmental rule and/or regulation and further, no representation or warranty is made of merchantability or fitness
for any particular purpose or against infringement of intellectual property rights.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2024.
All rights reserved.
ETSI
3 Final draft ETSI EG 201 788 V2.2.0 (2024-11)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 5
Introduction . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 6
3 Definition of terms, symbols and abbreviations . 6
3.1 Terms . 6
3.2 Symbols . 6
3.3 Abbreviations . 7
4 Purpose of System Reference documents. 7
5 Phases of System Reference documents. 7
6 Deliverable type . 8
7 Contents of the System Reference document . 8
7.1 Executive summary . 8
7.2 "Introduction" Status of pre-approval draft . 8
7.3 "1 Scope" . 9
7.4 "3 Definition of terms, symbols and abbreviations" . 9
7.5 "4 [Comments by ETSI Members on the System Reference document]" . 9
7.6 "5 Presentation of the system or technology" . 9
7.7 "6 Market information" . 9
7.8 "7 Technical information" . 10
7.8.0 General . 10
7.8.1 "7.1 Detailed technical description" . 10
7.8.2 "7.2 Technical parameters and implications on spectrum" . 10
7.8.2.0 General . 10
7.8.2.1 "7.2.1 Status of technical parameters" . 10
7.8.2.1.1 "7.2.1.1 Current ITU and European Common Allocations" . 10
7.8.2.1.2 "7.2.1.2 Sharing and compatibility studies (if any) already available" . 10
7.8.2.1.3 "7.2.1.3 Sharing and compatibility issues still to be considered" . 10
7.8.2.2 "7.2.2 Transmitter parameters" . 10
7.8.2.2.1 "7.2.2.1 Transmitter Output Power / Radiated Power" . 10
7.8.2.2.2 "7.2.2.2 Antenna Characteristics" . 10
7.8.2.2.3 "7.2.2.3 Operating Frequency" . 11
7.8.2.2.4 "7.2.2.4 Bandwidth" . 11
7.8.2.2.5 "7.2.2.5 Unwanted emissions" . 11
7.8.2.2.6 "7.2.2 " . 11
7.8.2.3 "7.2.3 Receiver parameters" . 11
7.8.2.4 "7.2.4 Channel access parameters" . 11
7.8.3 "7.3 Information on relevant standard(s)" . 11
7.9 "8 Radio spectrum request and justification" . 11
7.10 "9 Regulations". 11
7.10.0 General . 11
7.10.1 "9.1 Current regulations" . 11
7.10.2 "9.2 Proposed regulation and justification" . 11
Annex A: Survival guide for drafting/updating SRdocs . 12
A.0 Introduction . 12
A.1 Check list . 12
ETSI
4 Final draft ETSI EG 201 788 V2.2.0 (2024-11)
A.2 Further details concerning the management of the field . 12
Annex B: ECC deliverables available . 14
Annex C: EC regulations used in the context of frequency management . 15
History . 16
ETSI
5 Final draft ETSI EG 201 788 V2.2.0 (2024-11)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its
Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP
Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the ®
oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Foreword
This final draft ETSI Guide (EG) has been produced by ETSI Technical Committee Electromagnetic compatibility and
Radio spectrum Matters (ERM), and is now submitted for the ETSI Membership Approval Procedure.
Modal verbs terminology
In the present document "should", "should not", "may", "need not", "will", "will not", "can" and "cannot" are to be
interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
Introduction
As shown in the history box, the present document has been initially published as an ETSI Technical Report (TR).
The present version of this guide is expected to be used together with the ETSI TR skeleton that can be found at the
ETSI portal on the skeleton page (https://portal.etsi.org/Services/editHelp/Standards-development/Drafting/Skeletons).
The present document has been produced in cooperation with CEPT/ECC and its subordinate bodies.
ETSI
-----------
...
ETSI GUIDE
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Guidance for drafting an
ETSI System Reference document (SRdoc)
2 ETSI EG 201 788 V2.2.1 (2025-01)
Reference
REG/ERM-RM-282
Keywords
radio, SRdoc, system
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from the
ETSI Search & Browse Standards application.
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format on ETSI deliver repository.
Users should be aware that the present document may be revised or have its status changed,
this information is available in the Milestones listing.
If you find errors in the present document, please send your comments to
the relevant service listed under Committee Support Staff.
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure (CVD) program.
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
No representation or warranty is made that this deliverable is technically accurate or sufficient or conforms to any law
and/or governmental rule and/or regulation and further, no representation or warranty is made of merchantability or fitness
for any particular purpose or against infringement of intellectual property rights.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2025.
All rights reserved.
ETSI
3 ETSI EG 201 788 V2.2.1 (2025-01)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 5
Introduction . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 6
3 Definition of terms, symbols and abbreviations . 6
3.1 Terms . 6
3.2 Symbols . 6
3.3 Abbreviations . 7
4 Purpose of System Reference documents. 7
5 Phases of System Reference documents. 7
6 Deliverable type . 8
7 Contents of the System Reference document . 8
7.1 Executive summary . 8
7.2 "Introduction" Status of pre-approval draft . 8
7.3 "1 Scope" . 9
7.4 "3 Definition of terms, symbols and abbreviations" . 9
7.5 "4 [Comments by ETSI Members on the System Reference document]" . 9
7.6 "5 Presentation of the system or technology" . 9
7.7 "6 Market information" . 9
7.8 "7 Technical information" . 10
7.8.0 General . 10
7.8.1 "7.1 Detailed technical description" . 10
7.8.2 "7.2 Technical parameters and implications on spectrum" . 10
7.8.2.0 General . 10
7.8.2.1 "7.2.1 Status of technical parameters" . 10
7.8.2.1.1 "7.2.1.1 Current ITU and European Common Allocations" . 10
7.8.2.1.2 "7.2.1.2 Sharing and compatibility studies (if any) already available" . 10
7.8.2.1.3 "7.2.1.3 Sharing and compatibility issues still to be considered" . 10
7.8.2.2 "7.2.2 Transmitter parameters" . 10
7.8.2.2.1 "7.2.2.1 Transmitter Output Power / Radiated Power" . 10
7.8.2.2.2 "7.2.2.2 Antenna Characteristics" . 10
7.8.2.2.3 "7.2.2.3 Operating Frequency" . 11
7.8.2.2.4 "7.2.2.4 Bandwidth" . 11
7.8.2.2.5 "7.2.2.5 Unwanted emissions" . 11
7.8.2.2.6 "7.2.2 " . 11
7.8.2.3 "7.2.3 Receiver parameters" . 11
7.8.2.4 "7.2.4 Channel access parameters" . 11
7.8.3 "7.3 Information on relevant standard(s)" . 11
7.9 "8 Radio spectrum request and justification" . 11
7.10 "9 Regulations". 11
7.10.0 General . 11
7.10.1 "9.1 Current regulations" . 11
7.10.2 "9.2 Proposed regulation and justification" . 11
Annex A: Survival guide for drafting/updating SRdocs . 12
A.0 Introduction . 12
A.1 Check list . 12
ETSI
4 ETSI EG 201 788 V2.2.1 (2025-01)
A.2 Further details concerning the management of the field . 12
Annex B: ECC deliverables available . 14
Annex C: EC regulations used in the context of frequency management . 15
History . 16
ETSI
5 ETSI EG 201 788 V2.2.1 (2025-01)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI IPR online database.
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its
Members. 3GPP™, LTE™ and 5G™ logo are trademarks of ETSI registered for the benefit of its Members and of the
3GPP Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of ®
the oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Foreword
This ETSI Guide (EG) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio
spectrum Matters (ERM).
Modal verbs terminology
In the present document "should", "should not", "may", "need not", "will", "will not", "can" and "cannot" are to be
interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
Introduction
As shown in the history box, the present document has been initially published as an ETSI Technical Report (TR).
The present version of this guide is expected to be used together with the ETSI TR skeleton that can be found at the
ETSI portal on the skeleton page (https://portal.etsi.org/Services/editHelp/Standards-development/Drafting/Skeletons).
The present document has been produced in cooperation with CEPT/ECC and its subordinate bodies.
ETSI
6 ETSI EG 201 788 V2.2.1 (2025-01)
1 Scope
The present document contains guidance for dr
...
SLOVENSKI STANDARD
01-april-2025
Elektromagnetna združljivost in zadeve v zvezi z radijskim spektrom (ERM) -
Usmeritve za sestavljanje sistemskega referenčnega dokumenta ETSI (SRdoc)
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Guidance for drafting
an ETSI System Reference document (SRdoc)
Ta slovenski standard je istoveten z: ETSI EG 201 788 V2.2.1 (2025-01)
ICS:
33.060.01 Radijske komunikacije na Radiocommunications in
splošno general
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
ETSI GUIDE
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Guidance for drafting an
ETSI System Reference document (SRdoc)
2 ETSI EG 201 788 V2.2.1 (2025-01)
Reference
REG/ERM-RM-282
Keywords
radio, SRdoc, system
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from the
ETSI Search & Browse Standards application.
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format on ETSI deliver repository.
Users should be aware that the present document may be revised or have its status changed,
this information is available in the Milestones listing.
If you find errors in the present document, please send your comments to
the relevant service listed under Committee Support Staff.
If you find a security vulnerability in the present document, please report it through our
Coordinated Vulnerability Disclosure (CVD) program.
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
No representation or warranty is made that this deliverable is technically accurate or sufficient or conforms to any law
and/or governmental rule and/or regulation and further, no representation or warranty is made of merchantability or fitness
for any particular purpose or against infringement of intellectual property rights.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2025.
All rights reserved.
ETSI
3 ETSI EG 201 788 V2.2.1 (2025-01)
Contents
Intellectual Property Rights . 5
Foreword . 5
Modal verbs terminology . 5
Introduction . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 6
3 Definition of terms, symbols and abbreviations . 6
3.1 Terms . 6
3.2 Symbols . 6
3.3 Abbreviations . 7
4 Purpose of System Reference documents. 7
5 Phases of System Reference documents. 7
6 Deliverable type . 8
7 Contents of the System Reference document . 8
7.1 Executive summary . 8
7.2 "Introduction" Status of pre-approval draft . 8
7.3 "1 Scope" . 9
7.4 "3 Definition of terms, symbols and abbreviations" . 9
7.5 "4 [Comments by ETSI Members on the System Reference document]" . 9
7.6 "5 Presentation of the system or technology" . 9
7.7 "6 Market information" . 9
7.8 "7 Technical information" . 10
7.8.0 General . 10
7.8.1 "7.1 Detailed technical description" . 10
7.8.2 "7.2 Technical parameters and implications on spectrum" . 10
7.8.2.0 General . 10
7.8.2.1 "7.2.1 Status of technical parameters" . 10
7.8.2.1.1 "7.2.1.1 Current ITU and European Common Allocations" . 10
7.8.2.1.2 "7.2.1.2 Sharing and compatibility studies (if any) already available" . 10
7.8.2.1.3 "7.2.1.3 Sharing and compatibility issues still to be considered" . 10
7.8.2.2 "7.2.2 Transmitter parameters" . 10
7.8.2.2.1 "7.2.2.1 Transmitter Output Power / Radiated Power" . 10
7.8.2.2.2 "7.2.2.2 Antenna Characteristics" . 10
7.8.2.2.3 "7.2.2.3 Operating Frequency" . 11
7.8.2.2.4 "7.2.2.4 Bandwidth" . 11
7.8.2.2.5 "7.2.2.5 Unwanted emissions" . 11
7.8.2.2.6 "7.2.2 " . 11
7.8.2.3 "7.2.3 Receiver parameters" . 11
7.8.2.4 "7.2.4 Channel access parameters" . 11
7.8.3 "7.3 Information on relevant standard(s)" . 11
7.9 "8 Radio spectrum request and justification" . 11
7.10 "9 Regulations". 11
7.10.0 General . 11
7.10.1 "9.1 Current regulations" . 11
7.10.2 "9.2 Proposed regulation and justification" . 11
Annex A: Survival guide for drafting/updating SRdocs . 12
A.0 Introduction . 12
A.1 Check list . 12
ETSI
4 ETSI EG 201 788 V2.2.1 (2025-01)
A.2 Further details concerning the management of the field . 12
Annex B: ECC deliverables available . 14
Annex C: EC regulations used in the context of frequency management . 15
History . 16
ETSI
5 ETSI EG 201 788 V2.2.1 (2025-01)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI IPR online database.
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its
Members. 3GPP™, LTE™ and 5G™ logo are trademarks of ETSI registered for the benefit of its Members and of the
3GPP Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of ®
the oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Foreword
This ETSI Guide (EG) has been p
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.