SIST EN 3382:2012
(Main)Aerospace series - Rings retaining, internal, axial mounting, steel, phosphated
Aerospace series - Rings retaining, internal, axial mounting, steel, phosphated
This European Standard defines the characteristics of axial mounting internal retaining rings, in steel, phosphated, for aerospace applications.
The phosphating restricts the use at temperatures not exceeding 200 °C.
Luft- und Raumfahrt - Sicherungsringe, axial in Bohrungen montierbar, aus Stahl, phosphatiert
Diese Norm legt die Merkmale von axial in Bohrungen montierbaren Sicherungsringen aus Stahl mit
Phosphatbeschichtung zur Anwendung in der Luft- und Raumfahrt fest.
Die Phosphatbeschichtung beschränkt die Verwendung auf Temperaturen von nicht mehr als 200 °C.
Série aérospatiale - Anneaux d’arrêt, à montage axial, type intérieur, en acier, phosphatés
La présente Norme Européenne définit les caractéristiques des anneaux d’arrêt, à montage axial, type intérieur, en acier, phosphatés pour applications aérospatiales.
La phosphatation limite l’utilisation à des températures ne dépassant pas 200 °C.
Aeronavtika - Varnostni obroči za osno pritrditev v okrogle odprtine, jekleni, fosfatirani
Ta standard določa lastnosti jeklenih fosfatiranih varnostnih obročev za osno pritrditev v okrogle odprtine za uporabo v aeronavtiki. Fosfatiranje omejuje uporabo na temperature, ki ne presegajo 200 °C.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.IRVIDWLUDQLLuft- und Raumfahrt - Sicherungsringe, axial in Bohrungen montierbar, aus Stahl, phosphatiertSérie aérospatiale - Anneaux d’arrêt, à montage axial, type intérieur, en acier, phosphatésAerospace series - Rings retaining, internal, axial mounting, steel, phosphated49.030.50Podložke in drugi blokirni elementiWashers and other locking elementsICS:Ta slovenski standard je istoveten z:EN 3382:2012SIST EN 3382:2012en01-maj-2012SIST EN 3382:2012SLOVENSKI
STANDARD
SIST EN 3382:2012
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3382
March 2012 ICS 49.030.50 English Version
Aerospace series - Rings retaining, internal, axial mounting, steel, phosphated
Série aérospatiale - Anneaux d'arrêt, à montage axial, type intérieur, en acier, phosphatés
Luft- und Raumfahrt - Sicherungsringe, axial in Bohrungen montierbar, aus Stahl, phosphatiert This European Standard was approved by CEN on 24 September 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3382:2012: ESIST EN 3382:2012
EN 3382:2012 (E) 2 Contents Page Foreword .31 Scope and field of application .42 Normative references .43 Required characteristics .43.1 Configuration — Dimensions — Masses .43.2 Materials .43.3 Surface treatment .44 Designation .85 Marking .86 Technical specification .87 Mounting .8 SIST EN 3382:2012
EN 3382:2012 (E) 3 Foreword This document (EN 3382:2012) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2012, and conflicting national standards shall be withdrawn at the latest by September 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 3382:2012
EN 3382:2012 (E) 4 1 Scope and field of application This standard defines the characteristics of axial mount
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.