SIST ETS 300 704-2:2001
(Main)Digital Enhanced Cordless Telecommunications (DECT); Global System for Mobile communications (GSM); DECT/GSM Interworking Profile (IWP); Profile Implementation Conformance Statement (ICS); Part 2: Fixed radio Termination (FT)
Digital Enhanced Cordless Telecommunications (DECT); Global System for Mobile communications (GSM); DECT/GSM Interworking Profile (IWP); Profile Implementation Conformance Statement (ICS); Part 2: Fixed radio Termination (FT)
Profile Implementation Conformance Statement (ICS) proforma for the DECT/GSM Interworking profile specific protocol requirements of ETS 300 370 in compliance with the relevant requirements, and in accordance with the relevant guidance given in ISO/IEC 9646-6 & 7 and in ETS 300 406.
Digitalne izboljšane brezvrvične telekomunikacije (DECT) - Globalni sistem mobilnih komunikacij (GSM) - Profil medsebojnega delovanja DECT/GSM (IWP) - Izjava o skladnosti izvedbe profila (ICS) - 2. del: Fiksna radijska zaključitev (FT)
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Digital Enhanced Cordless Telecommunications (DECT); Global System for Mobile communications (GSM); DECT/GSM Interworking Profile (IWP); Profile Implementation Conformance Statement (ICS); Part 2: Fixed radio Termination (FT)33.070.30'(&7Digital Enhanced Cordless Telecommunications (DECT)ICS:Ta slovenski standard je istoveten z:ETS 300 704-2 Edition 13SIST ETS 300 704-2:2001en01-IHEUXDU-20013SIST ETS 300 704-2:2001SLOVENSKI
STANDARD
SIST ETS 300 704-2:2001
EUROPEANETS 300 704-2TELECOMMUNICATIONMarch 1997STANDARDSource: ETSI EP-DECTReference: DE/DECT-010044-2ICS:33.020Key words:ATS, DECT, GSM, ICS, radio, testingDigital Enhanced Cordless Telecommunications (DECT);Global System for Mobile communications (GSM);DECT/GSM Interworking Profile (IWP);Profile Implementation Conformance Statement (ICS);Part 2: Fixed radio Termination (FT)ETSIEuropean Telecommunications Standards InstituteETSI SecretariatPostal address: F-06921 Sophia Antipolis CEDEX - FRANCEOffice address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCEX.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: secretariat@etsi.frTel.: +33 4 92 94 42 00 - Fax: +33 4 93 65 47 16Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and theforegoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1997. All rights reserved.SIST ETS 300 704-2:2001
Page 2ETS 300 704-2: March 1997Whilst every care has been taken in the preparation and publication of this document, errors in content,typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to"ETSI Editing and Committee Support Dept." at the address shown on the title page.SIST ETS 300 704-2:2001
Page 3ETS 300 704-2: March 1997ContentsForeword.51Scope.72Normative references.73Definitions and abbreviations.83.1Definitions.83.2Abbreviations.84Conformance requirement concerning Profile ICS.8Annex A (normative):Requirement list for DECT FT.9A.1General.9A.1.1Profile Requirement List (Profile RL).9A.1.2General questions/assumptions.10A.2NWK layer - FT: Profile Requirement List (Profile RL).11A.2.1Major capabilities.11A.2.1.1Call Control (CC) features.11A.2.1.2Mobility Management (MM) features.12A.2.1.3Supplementary Service (SS) features (services).12A.2.1.4LCE features.13A.2.1.5Procedures.13A.2.2Messages.16A.2.2.1CC messages.16A.2.2.2MM messages.19A.2.2.3Link control entity messages.22A.2.3Information elements.22A.2.3.1Fixed length information element support.22A.2.3.2Variable length information element supported.23A.2.4GAP specific.28A.2.4.1General requirements.28A.2.4.2Application features.28A.2.4.3Management procedures.28Annex B (normative):DECT/GSM IWP Profile specific ICS proforma for FT.29B.1Introduction for completing the Profile specific ICS proforma.29B.1.1Purposes and structure.29B.1.2Instructions for completing the Profile specific ICS.31B.2Identification of the implementation.31B.2.1Date of statement.31B.2.2Identification of the implementation.31B.2.3Contact person.31B.2.4Relationship with the System Conformance Statement (SCS).32B.3Identification of the profile.32B.3.1Defect report numbers and amendments implemented.32B.3.2Addenda implemented.32B.4Global statement of conformance.33B.5Capabilities.33SIST ETS 300 704-2:2001
Page 4ETS 300 704-2: March 1997B.5.1NWK Profile-specific ICS proforma for FT.33B.5.1.1General requirements.33B.5.1.2Procedures.34B.5.1.3Multi-keypad.34B.5.1.4Mapping.34B.5.1.4.1Messages.35B.5.1.4.2Information elements.37History.39SIST ETS 300 704-2:2001
Page 5ETS 300 704-2: March 1997ForewordThis European Telecommunication Standard (ETS) has been produced by the Digital Enhanced CordlessTelecommunications (DECT) Project of the European Telecommunications Standards Institute (ETSI).The Digital Enhanced Cordless Telecommunications/Global System for Mobile communications(DECT/GSM) Interworking Profile (IWP) Implementation Conformance Statement (ICS) standardcomprises two parts:Part 1:"Portable radio Termination (PT)";Part 2:"Fixed radio Termination (FT)".Annex A contains the requirement lists for the FT DECT/GSM IWP.Annex B contains the profile specific ICS proforma for the FT DECT/GSM IWP.Transposition datesDate of adoption:21 March 1997Date of latest announcement of this ETS (doa):31 July 1997Date of latest publication of new National Standardor endorsement of this ETS (dop/e):31 January 1998Date of withdrawal of any conflicting National Standard (dow):31 January 1998SIST ETS 300 704-2:2001
Page 6ETS 300 704-2: March 1997Blank pageSIST ETS 300 704-2:2001
Page 7ETS 300 704-2: March 19971ScopeThis European Telecommunication Standard (ETS) provides the Profile Implementation ConformanceStatement (Profile ICS) proforma for the DECT/GSM IWP at the Fixed radio Termination (FT) as definedin ETS 300 370 [4] in compliance with the relevant requirements and in accordance with the relevantguidance given in ISO/IEC 9646-7 [11].The supplier of an implementation which is claimed to conform to ETS 300 370 [4] depending on the classARIs the implementation supports is required to complete:-a copy of the PICS proforma ETS 300 476 Parts 4 to 7 [5] - [8], updated with the requirements fromETS 300 474-2 [9], and with the replacements from annex A of this ETS; and-a copy of the Profile specific ICS proforma provided in annex B of this ETS.If the implementation supports in addition to ARI class-D any of ARI-A, B, or, C classes, the supplier hasto complete in addition a copy of ETS 300 474-2 [9] according to the GAP requirements.2Normative referencesThis ETS incorporates, by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text and the publications are listedhereafter. For dated references, subsequent amendments to or revisions of any of these publicationsapply to this ETS only when incorporated in it by amendment or revision. For undated references the latestedition of the publication referred to applies.[1]ETS 300 175-5: "Radio Equipment and Systems (RES); Digital EuropeanCordless Telecommunications (DECT); Common Interface (CI); Part 5: Network(NWK) layer".[2]ETS 300 444: "Radio Equipment and Systems (RES); Digital EuropeanCordless Telecommunications (DECT); Generic Access Profile (GAP)".[3]ETS 300 466: "Radio Equipment and Systems (RES); Digital EuropeanCordless Telecommunications/Global System for Mobile Communications(DECT/GSM) interworking profile; General description of service requirements;Functional capabilities and information flows".[4]ETS 300 370: "Radio Equipment and Systems (RES); Digital EuropeanCordless Telecommunications/Global System for Mobile communications(DECT/GSM) inter-working profile; Access and mapping (Protocol/proceduredescription for 3,1 kHz speech service)".[5]ETS 300 476-4: "Radio Equipment and Systems (RES); Digital EnhancedCordless Telecommunications (DECT); Common Interface (CI); ProtocolImplementation Conformance Statement (PICS) proforma; Part 4: Network(NWK) layer - Fixed radio Termination (FT)".[6]ETS 300 476-5: "Radio Equipment and Systems (RES); Digital EnhancedCordless Telecommunications (DECT); Common Interface (CI); ProtocolImplementation Conformance Statement (PICS) proforma; Part 5: Data LinkControl (DLC) layer - Fixed radio Termination (FT)".[7]ETS 300 476-6: "Radio Equipment and Systems (RES); Digital EnhancedCordless Telecommunications (DECT); Common Interface (CI); ProtocolImplementation Conformance Statement (PICS) proforma; Part 6: MediumAccess Control (MAC) layer - Fixed radio Termination (FT)".[8]ETS 300 476-7: "Radio Equipment and Systems (RES); Digital EnhancedCordless Telecommunications (DECT); Common Interface (CI); ProtocolImplementation Conformance Statement (PICS) proforma; Part 7: Physicallayer".SIST ETS 300 704-2:2001
Page 8ETS 300 704-2: March 1997[9]ETS 300 474-2: "Radio Equipment and Systems (RES); Digital EnhancedCordless Telecommunications (DECT); Generic Access Profile (GAP); Profilerequirement list and profile specific Implementation Conformance Statement(ICS) proforma; Part 2: Fixed radio Termination (FT)".[10]ISO/IEC 9646-1 (1991): "Information technology - Open SystemsInterconnection - Conformance testing methodology and framework - Part 1:General concepts". (See also CCITT Recommendation X.290 (1991)).[11]ISO/IEC 9646-7 (1991): "Information technology - Open SystemsInterconnection - Conformance testing methodology and framework - Part 7:Implementation conformance statement".3Definitions and abbreviations3.1DefinitionsFor the purposes of this ETS, the following terms and definitions apply:a)the terms defined in ISO/IEC 9646-7 [11];b)the definitions in ETS 300 370 [4];c)the definitions in ETS 300 466 [3]; andd)the following terms defined in ISO/IEC 9646-1 [10]:-PICS proforma;-Profile Implementation Conformance Statement (Profile ICS).3.2AbbreviationsFor the purposes of this ETS, the abbreviations defined in ISO/IEC 9646-1 [10], the abbreviations definedin ETS 300 466 [3], ETS 300 370 [4], ETS 300 175-5 [1], and ETS 300 444 [2], apply.4Conformance requirement concerning Profile ICSThe supplier of a protocol implementation which is claimed to conform to the FT specific requirements ofETS 300 370 [4] shall verify that his protocol implementation meets the profile Requirements Lists (RLs)DECT Network (NWK) protocol layer, contained in annex A, shall complete a copy of the Profile specificICS proforma provided in annex B and shall provide the information necessary to identify both the supplierand the implementation.SIST ETS 300 704-2:2001
Page 9ETS 300 704-2: March 1997Annex A (normative):Requirement list for DECT FTA.1GeneralThe supplier of a protocol implementation which is claimed to conform to the FT specific requirements ofETS 300 370 [4] shall verify that his protocol implementation meets the profile RL.For this, the supplier shall complete a copy of:a)the NWK layer PICS proforma contained in annex A of ETS 300 476-4 [5] if the client states supportonly for class D, updated with the GAP requirements for NWK layer from ETS 300 474-2 [9], and,updated with the requirements for NWK layer from this annex.If the client states support for ARI class-D and any of classes A, B or C, then he shall complete twoprofile ICS Proformas: one for ARI class-D as stated above, and, one according to the requirementsof ETS 300 474-2 [9];b)the DLC layer PICS proforma contained in annex A of ETS 300 476-5 [6] regardless of the classARI, updated with the GAP requirements for DLC layer from ETS 300 474-2 [9];c)the MAC layer PICS proforma contained in annex A of ETS 300 476-6 [7] regardless of the classARI, updated with the GAP requirements for MAC layer from ETS 300 474-2 [9];d)the PHL layer PICS proforma contained in annex A of ETS 300 476-7 [8] regardless of the classARI, updated with the GAP requirements for PHL layer from ETS 300 474-2 [9].A.1.1Profile Requirement List (Profile RL)The Profile RL for the NWK layer as defined in this subclause is based on ETS 300 476-4 [5] andETS 300 474-2 [9]. For every capability the profile requirements are expressed by restriction upon allowedsupport answers in ETS 300 474-2 [9] depending on whether the implementation supports only ARI classD or ARI class D and any of ARI classes A, B or C. The Profile RL is produced by copying selected tablesand/or table rows from ETS 300 474-2 [9] or ETS 300 476-4 [5] (e.g. if a table is not present inETS 300 474-2 [9] because of having the same status as in ETS 300 476-4 [5]), removing the column(s)to be completed by the supplier, and adding a new set of columns giving the new profile requirements,both in terms of the status and allowed values.Profile status columnA profile status column is provided - for Fixed Parts (FPs) supporting only ARI class D.NOTE:This column is also relevant for FPs supporting ARI class A and/or B and/or C (seeclause A.1).SIST ETS 300 704-2:2001
Page 10ETS 300 704-2: March 1997The standardized symbols for the status column are as follows:m or Mmandatory - the capability is required to be supported.o or Ooptional - the capability may be supported or not.n/a or N/Anot applicable - in the given context, it is impossible to use the capability.x or Xprohibited (excluded) - there is a requirement not to use this capability in thegiven context.oi or Oiqualified optional - for mutually exclusive or selectable options from a set. "i" isan integer which identifies an unique group of related optional items and thelogic of their selection which is defined immediately following the table.ci or Ciconditional - the requirement on the capability ("m", "o", "x" or "n/a") depends onthe support of other optional or conditional items. "i" is an integer identifying anunique conditional status expression which is defined immediately following thetable or which is defined in the general condition table below.i or Iout-of-scope - this capability is outside the scope of the given specification, andhence irrelevant and not subject to conformance testing. This status is inparticular applicable for data fields which are reserved for future use. Thestructure of such fields has to be supported, but the value is undefined and thusto be ignored.Reference columnThe reference column gives reference to ETS 300 370 [4], except where explicitly stated otherwise.A.1.2General questions/assumptionsThis subclause contains general questions and/or assumptions that expand all over the Annex A.Table A.1: General questions tableItemType ARI supportedProfilereferenceProfilestatusProfilesupport1Only ARI Class-D supported5.4.1o1012ARI Class-D and any of classes A, B or C supported5.4.1o101o101: It is mandatory to support only one of these options.Table A.2: General condition tableCondition identifierCondition definitionNote 1The status of the relevant item is exactly as the status of this item inETS 300 474-2 [9] or ETS 300 476 Parts 4 to 7 [5] -[8] The item has beenincluded as the Profile reference column include reference to the profile thatdescribes the item more in details.SIST ETS 300 704-2:2001
Page 11ETS 300 704-2: March 1997A.2NWK layer - FT: Profile Requirement List (Profile RL)A.2.1Major capabilitiesA.2.1.1Call Control (CC) featuresTo express the profile requirements of ETS 300 370 [4], the following table indicates the change of statusfor support of NWK layer CC features.NOTE:Although the notation "features" is not an ETS 300 370 [4] notation, features havebeen used here as a higher level of grouping of procedures. For consistency reasonssome features may comprise only one procedure.Table A.3: ETS 300 474-2 [9] Table A.3: CC features supportedItemCall Control featuresProfile referenceProfile statusARI-D1Bell off (Alerting)5.4.2, 6.1.1.1, 6.1.1.3See table A.22Bell on (Alerting)5.4.2, 6.1.1.1, 6.1.1.3See table A.25Dialled digits5.4.2, 6.1.1.1See table A.27Dialling delimiter5.4.2, 6.1.1.1m8Dialling delimiter request5.4.2, 6.1.1.1m10Emergency service access request5.4.2, 6.1.1.2m11External Handover (inter-cell)5.4.2, 6.1.2.9o13Go to DTMF (infinite tone length)6.1.4.3m14Go to DTMF signalling (defined tone length)-i15Go to Pulse-i17Incoming call5.4.2, 6.1.1.3,6.3.1.1.3See table A.218Internal call-i19Off hook5.4.2, 6.1.1.1,6.1.1.2, 6.1.1.3,6.3.1.1See table A.220Obn hook (full release)5.4.2, 6.1.1.4,6.1.1.5, 6.1.1.6,6.1.1.7, 6.1.1.8,6.3.1.2See table A.221Outgoing call5.4.2, 6.1.1.1,6.1.1.2, 6.3.1.1.1,6.3.1.1.2See table A.223Partial release-i24Pause (dialling pause)-i25Register recall-i28Service call-iSIST ETS 300 704-2:2001
Page 12ETS 300 704-2: March 1997A.2.1.2Mobility Management (MM) featuresTo express the profile requirements of ETS 300 370 [4], the following table indicates the change of statusfor support of NWK layer MM features.NOTE:Although the notation "features" is not an ETS 300 370 [4] notation, features havebeen used here as a higher level of grouping of procedures. For consistency reasonssome features may comprise only one procedure.Table A.4: ETS 300 474-2 [9] Table A.4: MM features supportedItemMobility Management featuresProfile referenceProfile statusARI-D1Authentication of FT5.4.2n/a2Authentication of PT5.4.2, 6.1.2.1, 6.3.2.1m3Authentication of user5.4.2x4Encryption activation FT initiated5.4.2, 6.1.2.6, 6.3.2.6m5Encryption activation PT initiated5.4.2, 6.1.2.9.5.3,6.3.2.7.5.3c4016Encryption deactivation FT initiated5.4.2, 6.1.2.6m7Encryption deactivation PT initiated5.4.2, 6.1.2.9.5.3,6.3.2.7.5.3c4018Identification of PP5.4.2, 6.1.2.2, 6.3.2.2m10Location de-registration (Detach)5.4.2, 6.1.2.4, 6.3.2.4m11Location registration5.4.2, 6.1.2.3, 6.3.2.3m12Multiple subscription registration-i13On air key allocation5.4.2x14Service class indication/assignment-i16Subscription registration procedure on-air5.4.2n/a19Terminate access rights FT initiated5.4.2x20Terminate access rights PT initiated5.4.2n/a21ZAP5.4.2x22MM Partial release-i23Temporary identity assign5.4.2, 6.1.2.5, 6.3.2.5mc401: IF A.3/11 THEN m ELSE n/aA.2.1.3Supplementary Service (SS) features (services)To express the profile requirements of ETS 300 370 [4], the following table indicates the change of statusfor support of NWK layer SS features (services).NOTE:Although the notation "features" is not an ETS 300 370 [4] notation, features havebeen used here as a higher level of grouping of procedures. For consistency reasonsome features may comprise only one procedure.Table A.5: ETS 300 474-2 [9] Table A.5: SS features (services) supportedItemCC (CRSS) and CISS featuresRef.Profile statusARI-D8Calling Line Identification Presentation (CLIP)-iSIST ETS 300 704-2:2001
Page 13ETS 300 704-2: March 1997A.2.1.4LCE featuresTo express the profile requirements of ETS 300 370 [4], the following table indicates the change of statusfor support of NWK layer LCE features (services).NOTE:Although the notation "features" is not an ETS 300 370 [4] notation, features havebeen used here as a higher level of grouping of procedures. For consistency reasonsome features may comprise only one procedure.Table A.6: ETS 300 474-2 [9] Table A.6: LCE features supportedItemLCE featuresProfile referenceProfile statusARI-D1Connection oriented Link control (Link control)5.4.2, 6.1.3, 6.3.3See table A.2A.2.1.5ProceduresTo express the profile requirements of ETS 300 370 [4], the following table indicates the change of statusfor support of NWK layer procedures.SIST ETS 300 704-2:2001
Page 14ETS 300 704-2: March 1997Table A.7: ETS 300 474-2 [9] Table A.7: CC procedures supportedItemCC proceduresProfile referenceProfile statusARI-D1cc_outgoing_normal_call_request5.4.2, 6.1.1.1,6.3.1.1.1See table A.22cc_outgoing_emergency_call_request5.4.2, 6.1.1.2,6.3.1.1.2m3cc_outgoing_external_handover_request6.1.2.9c7015cc_outgoing_connection_of_U_plane5.4.2, 6.2.1See table A.26cc_outgoing_overlap_sending5.4.2, 6.1.1.1,6.3.1.1.1m7cc_outgoing_call_proceeding5.4.2, 6.1.1.1,6.3.1.1.1m8cc_outgoing_call_confirmation5.4.2, 6.1.1.1,6.3.1.1.1m9cc_outgoing_call_connection5.4.2, 6.1.1.1,6.3.1.1.1See table A.210cc_incoming_call_request5.4.2, 6.1.1.3,6.3.1.1.3See table A.212cc_incoming_connection_of_U_plane5.4.2, 6.2.1See table A.215cc_incoming_call_confirmation5.4.2, 6.1.1.3,6.3.1.1.3See table A.216cc_incoming_call_connection5.4.2, 6.1.1.3,6.3.1.1.3See table A.218cc_sending_keypad_info5.4.2, 6.1.1.1,6.3.1.1.1See table A.219cc_call_information5.4.2, 6.1.1.1, 6.1.4.3See table A.220cc_normal_call_release5.4.2, 6.1.1.4,6.1.1.5, 6.3.1.2See table A.222cc_abnormal_call_release5.4.2, 6.1.1.6,6.1.1.7, 6.3.1.2See table A.223cc_release_collissions5.4.2, 6.1.1.8See table A.231cc_timer_f_cc_02_mgt5.4.2, 6.1.1.5,6.1.1.8, 6.1.5.2, 6.3.6m32cc_timer_f_cc_03_mgt5.4.2, 6.1.1.3,6.1.1.8, 6.1.5.2, 6.3.6m33cc_timer_f_cc_04_mgt5.4.2, 6.1.1.1,6.1.1.3, 6.1.1.8,6.1.5.2, 6.3.6m34cc_timer_f_cc_01_mgt5.4.2, 6.1.1.1,6.1.1.8, 6.1.5.2, 6.3.6m35cc_internal_call_setup-i36cc_service_call_setup-i38cc_service_call_keypad-i39cc_internal_call_keypad-i40pt_alerting5.4.2, 6.1.1.3See table A.2c701: IF A.3/11 THEN m ELSE n/aSIST ETS 300 704-2:2001
Page 15ETS 300 704-2: March 1997Table A.8: ETS 300 474-2 [9] Table A.8: MM procedures supportedItemMobility Management proceduresProfile referenceProfile statusARI-D1mm_identification_of_pt5.4.2, 6.1.2.2, 6.3.2.2See table A.22mm_temporary_identity_assignment5.4.2, 6.1.2.5, 6.3.2.5m3mm_authentication_of_pt5.4.2, 6.1.2.1, 6.3.2.1See table A.24mm_authentication_of_user5.4.2x5mm_authentication_of_ft-n/a6mm_location_registration5.4.2, 6.1.2.3,6.3.2.3, note 1m8mm_location_update5.4.2, 6.1.2.3, 6.3.2.3m9mm_obtain_access_rights-n/a10mm_pt_init_terminate_access_rights-n/a11mm_ft_init_terminate_access_rights5.4.2x12mm_key_allocation5.4.2x13mm_pt_init_parameter_retrieval5.4.2, 6.1.2.9.2,6.3.2.7.2c80114mm_ft_init_parameter_retrieval5.4.2, 6.1.2.1, 6.1.2.3m15mm_pt_init_cipher_switching5.4.2, 6.1.2.9.5.3,6.3.2.7.4.3c80116mm_ft_init_cipher_switching5.4.2, 6.1.2.6, 6.3.2.6m17mm_zap_increment5.4.2x18mm_dck_storing5.4.2, 6.1.2.1, 6.3.2.1m19mm_dck_sending5.4.2x20mm_service_class_mgt-i21mm_partial_releaseii23mm_timer_f_mm_ident_1_mgt5.4.2, 6.1.5.2See table A.224mm_timer_f_mm_access_2_mgt-n/a25mm_timer_f_mm_auth_1_mgt5.4.2, 6.1.5.2See table A.226mm_timer_f_mm_cipher_1_mgt5.4.2, 6.1.5.2See table A.227mm_timer_f_mm_key_1_mgt-n/a28mm_timer_f_mm_ident.2_mgt5.4.2, 6.1.5.2See table A.229mm_timer_f_mm_auth_2_mgt-n/ac801: IF A.3/11 THEN m ELSE n/aTable A.9: ETS 300 474-2 [9] Table A.9: SS protocols supportedItemSS protocol nameProfile referenceProfile statusARI-D1crss_keypad_protocol-iTable A.10: ETS 300 474-2 [9] Table A.10: LCE procedures supportedItemLCE proceduresProfile referenceProfile statusARI-D2lce_indirect_ft_init_link_establishment5.4.2, 6.1.3See table A.23lce_direct_ft_init_link_establishment-i11lce_timer_lce_01_mgt5.4.2, 6.1.5.2m12lce_timer_lce_02_mgt5.4.2, 6.1.5.2m11lce_timer_lce_03_mgt5.4.2, 6.1.3, 6.1.5.2mSIST ETS 300 704-2:2001
Page 16ETS 300 704-2: March 1997Table A.11: ETS 300 474-2 [9] Table A.11: LLME procedures supportedItemLLME proceduresProfile referenceProfile statusARI-D6mgt_mm_cc_coexistance5.4.2, 6.1m9mgt_call_ciphering_mgt5.4.2, 6.1.2.6,6.1.2.9, 6.3.2.6,6.3.2.7m9mgt_external_handover5.4.2, 6.1.2.9, 6.3.2.7c1101c1101: IF A.3/11 THEN m ELSE n/aA.2.2MessagesTo express the profile requirements of ETS 300 370 [4], the following tables indicate the change of statusfor support of NWK layer messages.Some DECT information elements can be used to convey the information carried in some GSMinformation elements, but the exact mapping has been considered as outside the scope of this ETS. Suchinformation elements hereafter are qualified as mandatory (m) to support their existence, as the mappingitself is application dependent.A.2.2.1CC messagesTable A.12: ETS 300 474-2 [9] Table A.12: CC receiving (P to F) messages supportedItemCC receiving (P to F)Message nameProfile referenceProfile statusARI-D1CC-SETUP6.1.6.2, 6.1.6.2.6,6.1.6.2.15,6.1.6.2.16, 6.1.6.2.21See table A.22CC-INFOrmation6.1.4.2, 6.1.4.3,6.1.6.2, 6.1.6.2.10,6.1.6.2.18, 6.1.6.2.19See table A.25CC-ALERTING6.1.6.2, 6.1.6.2.8See table A.26CC-CONNECT6.1.6.2, 6.1.6.2.9See table A.27CC-CONNECT-ACKnowledge6.1.6.2, 6.1.6.2.22c12018CC-RELEASE6.1.6.2, 6.1.6.2.11,6.1.6.2.12, 6.1.6.2.17See table A.29CC-RELEASE-COMplete6.1.6.2, 6.1.6.2.13,6.1.6.2.14See table A.2C1201: IF A.3/11 THEN m ELSE ISIST ETS 300 704-2:2001
Page 17ETS 300 704-2: March 1997Table A.13: ETS 300 474-2 [9] Table A.13: CC sending (F to P) messages supportedItemCC sending (F to P)Message nameProfile referenceProfile statusARI-D1CC-SETUP6.1.6.1, 6.1.6.1.11See table A.22CC-INFOrmation6.1.6.1, 6.1.4.2,6.1.4.3, 6.1.6.1.18,6.1.6.1.20,6.1.6.1.22,6.1.6.1.23, 6.1.6.1.24m3CC-SETUP-ACKnowledge6.1.1.1, 6.1.6.1m4CC-CALL-PROCeeding6.1.6.1, 6.1.6.1.9m5CC-ALERTING6.1.6.1, 6.1.6.1.8m6CC-CONNECT6.1.6.1, 6.1.6.1.10See table A.27CC-CONNECT-ACKnowledge6.1.6.1, 6.1.6.1.17See table A.28CC-RELEASE6.1.6.1, 6.1.6.1.12,6.1.6.1.21, 6.1.6.1.27See table A.29CC-RELEASE-COMplete6.1.6.1, 6.1.6.1.13,6.1.6.1.14,6.1.6.1.15, 6.1.6.16See table A.213CC-NOTIFY6.1.6.1, 6.1.4.2.2,6.1.2.7, 6.1.6.1.19See table A.2Table A.14: ETS 300 474-2 [9] Table A.14: CC-SETUP receiving (P to F) supportedItemCC-SETUP receiving (P to F)Information element nameProfile referenceProfile statusARI-D4Basic service6.1.7.2.10See table A.214Cipher info6.1.6.2.6, 6.1.7.2.4m30Called party number6.1.7.2.11m32Sending complete6.1.1.1mTable A.15: ETS 300 474-2 [9] Table A.15: CC-SETUP sending (F to P) supportedItemCC-SETUP sending (F to P)Information element nameProfile referenceProfile statusARI-D4Basic service6.1.7.2.10See table A.216Facility6.1.7.1.11m17Progress Indicator6.1.7.1.8m20Signal6.1.7.1.11m29Calling party number6.1.6.1.11m30Called party number6.1.6.1.11m31Called party subaddress6.1.6.1.11m33IWU-to-IWU6.1.6.1.11mTable A.16: ETS 300 474-2 [9] Table A.16: CC-INFO receiving (P to F) supportedItemCC-INFO receiving (P to F)Information element nameProfile referenceProfile statusARI-D7Keypad (multi keypad)6.1.6.2.10See table A.212Called party number6.1.1.1m14Sending complete6.1.1.1mSIST ETS 300 704-2:2001
Page 18ETS 300 704-2: March 1997Table A.17: ETS 300 474-2 [9] Table A.18: CC-SETUP-ACK sending (F to P) sup
...
SLOVENSKI STANDARD
SIST ETS 300 704-2:2001
01-september-2001
'LJLWDOQHL]EROMãDQHEUH]YUYLþQHWHOHNRPXQLNDFLMH '(&7 *OREDOQLVLVWHP
PRELOQLKNRPXQLNDFLM *60 3URILOPHGVHERMQHJDGHORYDQMD'(&7*60 ,:3
,]MDYDRVNODGQRVWLL]YHGEHSURILOD ,&6 GHO )LNVQDUDGLMVND]DNOMXþLWHY )7
Digital Enhanced Cordless Telecommunications (DECT); Global System for Mobile
communications (GSM); DECT/GSM Interworking Profile (IWP); Profile Implementation
Conformance Statement (ICS); Part 2: Fixed radio Termination (FT)
Ta slovenski standard je istoveten z: ETS 300 704-2 Edition 1
ICS:
33.070.30 'LJLWDOQHL]EROMãDQH Digital Enhanced Cordless
EUH]YUYLþQHWHOHNRPXQLNDFLMH Telecommunications (DECT)
'(&7
SIST ETS 300 704-2:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST ETS 300 704-2:2001
---------------------- Page: 2 ----------------------
SIST ETS 300 704-2:2001
EUROPEAN ETS 300 704-2
TELECOMMUNICATION March 1997
STANDARD
Source: ETSI EP-DECT Reference: DE/DECT-010044-2
ICS: 33.020
Key words: ATS, DECT, GSM, ICS, radio, testing
Digital Enhanced Cordless Telecommunications (DECT);
Global System for Mobile communications (GSM);
DECT/GSM Interworking Profile (IWP);
Profile Implementation Conformance Statement (ICS);
Part 2: Fixed radio Termination (FT)
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
Postal address: F-06921 Sophia Antipolis CEDEX - FRANCE
Office address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
X.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: secretariat@etsi.fr
Tel.: +33 4 92 94 42 00 - Fax: +33 4 93 65 47 16
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1997. All rights reserved.
---------------------- Page: 3 ----------------------
SIST ETS 300 704-2:2001
Page 2
ETS 300 704-2: March 1997
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Editing and Committee Support Dept." at the address shown on the title page.
---------------------- Page: 4 ----------------------
SIST ETS 300 704-2:2001
Page 3
ETS 300 704-2: March 1997
Contents
Foreword .5
1 Scope .7
2 Normative references.7
3 Definitions and abbreviations .8
3.1 Definitions .8
3.2 Abbreviations .8
4 Conformance requirement concerning Profile ICS .8
Annex A (normative): Requirement list for DECT FT.9
A.1 General.9
A.1.1 Profile Requirement List (Profile RL) .9
A.1.2 General questions/assumptions .10
A.2 NWK layer - FT: Profile Requirement List (Profile RL).11
A.2.1 Major capabilities .11
A.2.1.1 Call Control (CC) features.11
A.2.1.2 Mobility Management (MM) features.12
A.2.1.3 Supplementary Service (SS) features (services) .12
A.2.1.4 LCE features .13
A.2.1.5 Procedures.13
A.2.2 Messages.16
A.2.2.1 CC messages.16
A.2.2.2 MM messages.19
A.2.2.3 Link control entity messages.22
A.2.3 Information elements .22
A.2.3.1 Fixed length information element support .22
A.2.3.2 Variable length information element supported.23
A.2.4 GAP specific .28
A.2.4.1 General requirements.28
A.2.4.2 Application features.28
A.2.4.3 Management procedures .28
Annex B (normative): DECT/GSM IWP Profile specific ICS proforma for FT.29
B.1 Introduction for completing the Profile specific ICS proforma.29
B.1.1 Purposes and structure.29
B.1.2 Instructions for completing the Profile specific ICS .31
B.2 Identification of the implementation.31
B.2.1 Date of statement .31
B.2.2 Identification of the implementation .31
B.2.3 Contact person.31
B.2.4 Relationship with the System Conformance Statement (SCS).32
B.3 Identification of the profile .32
B.3.1 Defect report numbers and amendments implemented .32
B.3.2 Addenda implemented.32
B.4 Global statement of conformance .33
B.5 Capabilities.33
---------------------- Page: 5 ----------------------
SIST ETS 300 704-2:2001
Page 4
ETS 300 704-2: March 1997
B.5.1 NWK Profile-specific ICS proforma for FT. 33
B.5.1.1 General requirements. 33
B.5.1.2 Procedures . 34
B.5.1.3 Multi-keypad. 34
B.5.1.4 Mapping . 34
B.5.1.4.1 Messages. 35
B.5.1.4.2 Information elements . 37
History. 39
---------------------- Page: 6 ----------------------
SIST ETS 300 704-2:2001
Page 5
ETS 300 704-2: March 1997
Foreword
This European Telecommunication Standard (ETS) has been produced by the Digital Enhanced Cordless
Telecommunications (DECT) Project of the European Telecommunications Standards Institute (ETSI).
The Digital Enhanced Cordless Telecommunications/Global System for Mobile communications
(DECT/GSM) Interworking Profile (IWP) Implementation Conformance Statement (ICS) standard
comprises two parts:
Part 1: "Portable radio Termination (PT)";
Part 2: "Fixed radio Termination (FT)".
Annex A contains the requirement lists for the FT DECT/GSM IWP.
Annex B contains the profile specific ICS proforma for the FT DECT/GSM IWP.
Transposition dates
Date of adoption: 21 March 1997
Date of latest announcement of this ETS (doa): 31 July 1997
Date of latest publication of new National Standard
or endorsement of this ETS (dop/e): 31 January 1998
Date of withdrawal of any conflicting National Standard (dow): 31 January 1998
---------------------- Page: 7 ----------------------
SIST ETS 300 704-2:2001
Page 6
ETS 300 704-2: March 1997
Blank page
---------------------- Page: 8 ----------------------
SIST ETS 300 704-2:2001
Page 7
ETS 300 704-2: March 1997
1 Scope
This European Telecommunication Standard (ETS) provides the Profile Implementation Conformance
Statement (Profile ICS) proforma for the DECT/GSM IWP at the Fixed radio Termination (FT) as defined
in ETS 300 370 [4] in compliance with the relevant requirements and in accordance with the relevant
guidance given in ISO/IEC 9646-7 [11].
The supplier of an implementation which is claimed to conform to ETS 300 370 [4] depending on the class
ARIs the implementation supports is required to complete:
- a copy of the PICS proforma ETS 300 476 Parts 4 to 7 [5] - [8], updated with the requirements from
ETS 300 474-2 [9], and with the replacements from annex A of this ETS; and
- a copy of the Profile specific ICS proforma provided in annex B of this ETS.
If the implementation supports in addition to ARI class-D any of ARI-A, B, or, C classes, the supplier has
to complete in addition a copy of ETS 300 474-2 [9] according to the GAP requirements.
2 Normative references
This ETS incorporates, by dated or undated reference, provisions from other publications. These
normative references are cited at the appropriate places in the text and the publications are listed
hereafter. For dated references, subsequent amendments to or revisions of any of these publications
apply to this ETS only when incorporated in it by amendment or revision. For undated references the latest
edition of the publication referred to applies.
[1] ETS 300 175-5: "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Common Interface (CI); Part 5: Network
(NWK) layer".
[2] ETS 300 444: "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications (DECT); Generic Access Profile (GAP)".
[3] ETS 300 466: "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications/Global System for Mobile Communications
(DECT/GSM) interworking profile; General description of service requirements;
Functional capabilities and information flows".
[4] ETS 300 370: "Radio Equipment and Systems (RES); Digital European
Cordless Telecommunications/Global System for Mobile communications
(DECT/GSM) inter-working profile; Access and mapping (Protocol/procedure
description for 3,1 kHz speech service)".
[5] ETS 300 476-4: "Radio Equipment and Systems (RES); Digital Enhanced
Cordless Telecommunications (DECT); Common Interface (CI); Protocol
Implementation Conformance Statement (PICS) proforma; Part 4: Network
(NWK) layer - Fixed radio Termination (FT)".
[6] ETS 300 476-5: "Radio Equipment and Systems (RES); Digital Enhanced
Cordless Telecommunications (DECT); Common Interface (CI); Protocol
Implementation Conformance Statement (PICS) proforma; Part 5: Data Link
Control (DLC) layer - Fixed radio Termination (FT)".
[7] ETS 300 476-6: "Radio Equipment and Systems (RES); Digital Enhanced
Cordless Telecommunications (DECT); Common Interface (CI); Protocol
Implementation Conformance Statement (PICS) proforma; Part 6: Medium
Access Control (MAC) layer - Fixed radio Termination (FT)".
[8] ETS 300 476-7: "Radio Equipment and Systems (RES); Digital Enhanced
Cordless Telecommunications (DECT); Common Interface (CI); Protocol
Implementation Conformance Statement (PICS) proforma; Part 7: Physical
layer".
---------------------- Page: 9 ----------------------
SIST ETS 300 704-2:2001
Page 8
ETS 300 704-2: March 1997
[9] ETS 300 474-2: "Radio Equipment and Systems (RES); Digital Enhanced
Cordless Telecommunications (DECT); Generic Access Profile (GAP); Profile
requirement list and profile specific Implementation Conformance Statement
(ICS) proforma; Part 2: Fixed radio Termination (FT)".
[10] ISO/IEC 9646-1 (1991): "Information technology - Open Systems
Interconnection - Conformance testing methodology and framework - Part 1:
General concepts". (See also CCITT Recommendation X.290 (1991)).
[11] ISO/IEC 9646-7 (1991): "Information technology - Open Systems
Interconnection - Conformance testing methodology and framework - Part 7:
Implementation conformance statement".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of this ETS, the following terms and definitions apply:
a) the terms defined in ISO/IEC 9646-7 [11];
b) the definitions in ETS 300 370 [4];
c) the definitions in ETS 300 466 [3]; and
d) the following terms defined in ISO/IEC 9646-1 [10]:
- PICS proforma;
- Profile Implementation Conformance Statement (Profile ICS).
3.2 Abbreviations
For the purposes of this ETS, the abbreviations defined in ISO/IEC 9646-1 [10], the abbreviations defined
in ETS 300 466 [3], ETS 300 370 [4], ETS 300 175-5 [1], and ETS 300 444 [2], apply.
4 Conformance requirement concerning Profile ICS
The supplier of a protocol implementation which is claimed to conform to the FT specific requirements of
ETS 300 370 [4] shall verify that his protocol implementation meets the profile Requirements Lists (RLs)
DECT Network (NWK) protocol layer, contained in annex A, shall complete a copy of the Profile specific
ICS proforma provided in annex B and shall provide the information necessary to identify both the supplier
and the implementation.
---------------------- Page: 10 ----------------------
SIST ETS 300 704-2:2001
Page 9
ETS 300 704-2: March 1997
Annex A (normative): Requirement list for DECT FT
A.1 General
The supplier of a protocol implementation which is claimed to conform to the FT specific requirements of
ETS 300 370 [4] shall verify that his protocol implementation meets the profile RL.
For this, the supplier shall complete a copy of:
a) the NWK layer PICS proforma contained in annex A of ETS 300 476-4 [5] if the client states support
only for class D, updated with the GAP requirements for NWK layer from ETS 300 474-2 [9], and,
updated with the requirements for NWK layer from this annex.
If the client states support for ARI class-D and any of classes A, B or C, then he shall complete two
profile ICS Proformas: one for ARI class-D as stated above, and, one according to the requirements
of ETS 300 474-2 [9];
b) the DLC layer PICS proforma contained in annex A of ETS 300 476-5 [6] regardless of the class
ARI, updated with the GAP requirements for DLC layer from ETS 300 474-2 [9];
c) the MAC layer PICS proforma contained in annex A of ETS 300 476-6 [7] regardless of the class
ARI, updated with the GAP requirements for MAC layer from ETS 300 474-2 [9];
d) the PHL layer PICS proforma contained in annex A of ETS 300 476-7 [8] regardless of the class
ARI, updated with the GAP requirements for PHL layer from ETS 300 474-2 [9].
A.1.1 Profile Requirement List (Profile RL)
The Profile RL for the NWK layer as defined in this subclause is based on ETS 300 476-4 [5] and
ETS 300 474-2 [9]. For every capability the profile requirements are expressed by restriction upon allowed
support answers in ETS 300 474-2 [9] depending on whether the implementation supports only ARI class
D or ARI class D and any of ARI classes A, B or C. The Profile RL is produced by copying selected tables
and/or table rows from ETS 300 474-2 [9] or ETS 300 476-4 [5] (e.g. if a table is not present in
ETS 300 474-2 [9] because of having the same status as in ETS 300 476-4 [5]), removing the column(s)
to be completed by the supplier, and adding a new set of columns giving the new profile requirements,
both in terms of the status and allowed values.
Profile status column
A profile status column is provided - for Fixed Parts (FPs) supporting only ARI class D.
NOTE: This column is also relevant for FPs supporting ARI class A and/or B and/or C (see
clause A.1).
---------------------- Page: 11 ----------------------
SIST ETS 300 704-2:2001
Page 10
ETS 300 704-2: March 1997
The standardized symbols for the status column are as follows:
m or M mandatory - the capability is required to be supported.
o or O optional - the capability may be supported or not.
n/a or N/A not applicable - in the given context, it is impossible to use the capability.
x or X prohibited (excluded) - there is a requirement not to use this capability in the
given context.
oi or Oi qualified optional - for mutually exclusive or selectable options from a set. "i" is
an integer which identifies an unique group of related optional items and the
logic of their selection which is defined immediately following the table.
ci or Ci conditional - the requirement on the capability ("m", "o", "x" or "n/a") depends on
the support of other optional or conditional items. "i" is an integer identifying an
unique conditional status expression which is defined immediately following the
table or which is defined in the general condition table below.
i or I out-of-scope - this capability is outside the scope of the given specification, and
hence irrelevant and not subject to conformance testing. This status is in
particular applicable for data fields which are reserved for future use. The
structure of such fields has to be supported, but the value is undefined and thus
to be ignored.
Reference column
The reference column gives reference to ETS 300 370 [4], except where explicitly stated otherwise.
A.1.2 General questions/assumptions
This subclause contains general questions and/or assumptions that expand all over the Annex A.
Table A.1: General questions table
Item Type ARI supported Profile Profile Profile
reference status support
1 Only ARI Class-D supported 5.4.1 o101
2 ARI Class-D and any of classes A, B or C supported 5.4.1 o101
o101: It is mandatory to support only one of these options.
Table A.2: General condition table
Condition identifier Condition definition
Note 1 The status of the relevant item is exactly as the status of this item in
ETS 300 474-2 [9] or ETS 300 476 Parts 4 to 7 [5] -[8] The item has been
included as the Profile reference column include reference to the profile that
describes the item more in details.
---------------------- Page: 12 ----------------------
SIST ETS 300 704-2:2001
Page 11
ETS 300 704-2: March 1997
A.2 NWK layer - FT: Profile Requirement List (Profile RL)
A.2.1 Major capabilities
A.2.1.1 Call Control (CC) features
To express the profile requirements of ETS 300 370 [4], the following table indicates the change of status
for support of NWK layer CC features.
NOTE: Although the notation "features" is not an ETS 300 370 [4] notation, features have
been used here as a higher level of grouping of procedures. For consistency reasons
some features may comprise only one procedure.
Table A.3: ETS 300 474-2 [9] Table A.3: CC features supported
Item Call Control features Profile reference Profile status
ARI-D
1 Bell off (Alerting) 5.4.2, 6.1.1.1, 6.1.1.3 See table A.2
2 Bell on (Alerting) 5.4.2, 6.1.1.1, 6.1.1.3 See table A.2
5 Dialled digits 5.4.2, 6.1.1.1 See table A.2
7 Dialling delimiter 5.4.2, 6.1.1.1 m
8 Dialling delimiter request 5.4.2, 6.1.1.1 m
10 Emergency service access request 5.4.2, 6.1.1.2 m
11 External Handover (inter-cell) 5.4.2, 6.1.2.9 o
13 Go to DTMF (infinite tone length) 6.1.4.3 m
14 Go to DTMF signalling (defined tone length) - i
15 Go to Pulse - i
17 Incoming call 5.4.2, 6.1.1.3, See table A.2
6.3.1.1.3
18 Internal call - i
19 Off hook 5.4.2, 6.1.1.1, See table A.2
6.1.1.2, 6.1.1.3,
6.3.1.1
20 Obn hook (full release) 5.4.2, 6.1.1.4, See table A.2
6.1.1.5, 6.1.1.6,
6.1.1.7, 6.1.1.8,
6.3.1.2
21 Outgoing call 5.4.2, 6.1.1.1, See table A.2
6.1.1.2, 6.3.1.1.1,
6.3.1.1.2
23 Partial release - i
24 Pause (dialling pause) - i
25 Register recall - i
28 Service call - i
---------------------- Page: 13 ----------------------
SIST ETS 300 704-2:2001
Page 12
ETS 300 704-2: March 1997
A.2.1.2 Mobility Management (MM) features
To express the profile requirements of ETS 300 370 [4], the following table indicates the change of status
for support of NWK layer MM features.
NOTE: Although the notation "features" is not an ETS 300 370 [4] notation, features have
been used here as a higher level of grouping of procedures. For consistency reasons
some features may comprise only one procedure.
Table A.4: ETS 300 474-2 [9] Table A.4: MM features supported
Item Mobility Management features Profile reference Profile status
ARI-D
1 Authentication of FT 5.4.2 n/a
2 Authentication of PT 5.4.2, 6.1.2.1, 6.3.2.1 m
3 Authentication of user 5.4.2 x
4 Encryption activation FT initiated 5.4.2, 6.1.2.6, 6.3.2.6 m
5 Encryption activation PT initiated 5.4.2, 6.1.2.9.5.3, c401
6.3.2.7.5.3
6 Encryption deactivation FT initiated 5.4.2, 6.1.2.6 m
7 Encryption deactivation PT initiated 5.4.2, 6.1.2.9.5.3, c401
6.3.2.7.5.3
8 Identification of PP 5.4.2, 6.1.2.2, 6.3.2.2 m
10 Location de-registration (Detach) 5.4.2, 6.1.2.4, 6.3.2.4 m
11 Location registration 5.4.2, 6.1.2.3, 6.3.2.3 m
12 Multiple subscription registration - i
13 On air key allocation 5.4.2 x
14 Service class indication/assignment - i
16 Subscription registration procedure on-air 5.4.2 n/a
19 Terminate access rights FT initiated 5.4.2 x
20 Terminate access rights PT initiated 5.4.2 n/a
21 ZAP 5.4.2 x
22 MM Partial release - i
23 Temporary identity assign 5.4.2, 6.1.2.5, 6.3.2.5 m
c401: IF A.3/11 THEN m ELSE n/a
A.2.1.3 Supplementary Service (SS) features (services)
To express the profile requirements of ETS 300 370 [4], the following table indicates the change of status
for support of NWK layer SS features (services).
NOTE: Although the notation "features" is not an ETS 300 370 [4] notation, features have
been used here as a higher level of grouping of procedures. For consistency reason
some features may comprise only one procedure.
Table A.5: ETS 300 474-2 [9] Table A.5: SS features (services) supported
Item CC (CRSS) and CISS features Ref. Profile status
ARI-D
8 Calling Line Identification Presentation (CLIP) - i
---------------------- Page: 14 ----------------------
SIST ETS 300 704-2:2001
Page 13
ETS 300 704-2: March 1997
A.2.1.4 LCE features
To express the profile requirements of ETS 300 370 [4], the following table indicates the change of status
for support of NWK layer LCE features (services).
NOTE: Although the notation "features" is not an ETS 300 370 [4] notation, features have
been used here as a higher level of grouping of procedures. For consistency reason
some features may comprise only one procedure.
Table A.6: ETS 300 474-2 [9] Table A.6: LCE features supported
Item LCE features Profile reference Profile status
ARI-D
1 Connection oriented Link control (Link control) 5.4.2, 6.1.3, 6.3.3 See table A.2
A.2.1.5 Procedures
To express the profile requirements of ETS 300 370 [4], the following table indicates the change of status
for support of NWK layer procedures.
---------------------- Page: 15 ----------------------
SIST ETS 300 704-2:2001
Page 14
ETS 300 704-2: March 1997
Table A.7: ETS 300 474-2 [9] Table A.7: CC procedures supported
Item CC procedures Profile reference Profile status
ARI-D
1 cc_outgoing_normal_call_request 5.4.2, 6.1.1.1, See table A.2
6.3.1.1.1
2 cc_outgoing_emergency_call_request 5.4.2, 6.1.1.2, m
6.3.1.1.2
3 cc_outgoing_external_handover_request 6.1.2.9 c701
5 cc_outgoing_connection_of_U_plane 5.4.2, 6.2.1 See table A.2
6 cc_outgoing_overlap_sending 5.4.2, 6.1.1.1, m
6.3.1.1.1
7 cc_outgoing_call_proceeding 5.4.2, 6.1.1.1, m
6.3.1.1.1
8 cc_outgoing_call_confirmation 5.4.2, 6.1.1.1, m
6.3.1.1.1
9 cc_outgoing_call_connection 5.4.2, 6.1.1.1, See table A.2
6.3.1.1.1
10 cc_incoming_call_request 5.4.2, 6.1.1.3, See table A.2
6.3.1.1.3
12 cc_incoming_connection_of_U_plane 5.4.2, 6.2.1 See table A.2
15 cc_incoming_call_confirmation 5.4.2, 6.1.1.3, See table A.2
6.3.1.1.3
16 cc_incoming_call_connection 5.4.2, 6.1.1.3, See table A.2
6.3.1.1.3
18 cc_sending_keypad_info 5.4.2, 6.1.1.1, See table A.2
6.3.1.1.1
19 cc_call_information 5.4.2, 6.1.1.1, 6.1.4.3 See table A.2
20 cc_normal_call_release 5.4.2, 6.1.1.4, See table A.2
6.1.1.5, 6.3.1.2
22 cc_abnormal_call_release 5.4.2, 6.1.1.6, See table A.2
6.1.1.7, 6.3.1.2
23 cc_release_collissions 5.4.2, 6.1.1.8 See table A.2
31 cc_timer_f_cc_02_mgt 5.4.2, 6.1.1.5, m
6.1.1.8, 6.1.5.2, 6.3.6
32 cc_timer_f_cc_03_mgt 5.4.2, 6.1.1.3, m
6.1.1.8, 6.1.5.2, 6.3.6
33 cc_timer_f_cc_04_mgt 5.4.2, 6.1.1.1, m
6.1.1.3, 6.1.1.8,
6.1.5.2, 6.3.6
34 cc_timer_f_cc_01_mgt 5.4.2, 6.1.1.1, m
6.1.1.8, 6.1.5.2, 6.3.6
35 cc_internal_call_setup - i
36 cc_service_call_setup - i
38 cc_service_call_keypad - i
39 cc_internal_call_keypad - i
40 pt_alerting 5.4.2, 6.1.1.3 See table A.2
c701: IF A.3/11 THEN m ELSE n/a
---------------------- Page: 16 ----------------------
SIST ETS 300 704-2:2001
Page 15
ETS 300 704-2: March 1997
Table A.8: ETS 300 474-2 [9] Table A.8: MM procedures supported
Item Mobility Management procedures Profile reference Profile status
ARI-D
1 mm_identification_of_pt 5.4.2, 6.1.2.2, 6.3.2.2 See table A.2
2 mm_temporary_identity_assignment 5.4.2, 6.1.2.5, 6.3.2.5 m
3 mm_authentication_of_pt 5.4.2, 6.1.2.1, 6.3.2.1 See table A.2
4 mm_authentication_of_user 5.4.2 x
5 mm_authentication_of_ft - n/a
6 mm_location_registration 5.4.2, 6.1.2.3, m
6.3.2.3, note 1
8 mm_location_update 5.4.2, 6.1.2.3, 6.3.2.3 m
9 mm_obtain_access_rights - n/a
10 mm_pt_init_terminate_access_rights - n/a
11 mm_ft_init_terminate_access_rights 5.4.2 x
12 mm_key_allocation 5.4.2 x
13 mm_pt_init_parameter_retrieval 5.4.2, 6.1.2.9.2, c801
6.3.2.7.2
14 mm_ft_init_parameter_retrieval 5.4.2, 6.1.2.1, 6.1.2.3 m
15 mm_pt_init_cipher_switching 5.4.2, 6.1.2.9.5.3, c801
6.3.2.7.4.3
16 mm_ft_init_cipher_switching 5.4.2, 6.1.2.6, 6.3.2.6 m
17 mm_zap_increment 5.4.2 x
18 mm_dck_storing 5.4.2, 6.1.2.1, 6.3.2.1 m
19 mm_dck_sending 5.4.2 x
20 mm_service_class_mgt - i
21 mm_partial_release i i
23 mm_timer_f_mm_ident_1_mgt 5.4.2, 6.1.5.2 See table A.2
24 mm_timer_f_mm_access_2_mgt - n/a
25 mm_timer_f_mm_auth_1_mgt 5.4.2, 6.1.5.2 See table A.2
26 mm_timer_f_mm_cipher_1_mgt 5.4.2, 6.1.5.2 See table A.2
27 mm_timer_f_mm_key_1_mgt - n/a
28 mm_timer_f_mm_ident.2_mgt 5.4.2, 6.1.5.2 See table A.2
29 mm_timer_f_mm_auth_2_mgt - n/a
c801: IF A.3/11 THEN m ELSE n/a
Table A.9: ETS 300 474-2 [9] Table A.9: SS protocols supported
Item SS protocol name Profile reference Profile status
ARI-D
1 crss_keypad_protocol - i
Table A.10: ETS 300 474-2 [9] Table A.10: LCE procedures supported
Item LCE procedures Profile reference Profile status
ARI-D
2 lce_indirect_ft_init_link_establishment 5.4.2, 6.1.3 See table A.2
3 lce_direct_ft_init_link_establishment - i
11 lce_timer_lce_01_mgt 5.4.2, 6.1.5.2 m
12 lce_timer_lce_02_mgt 5.4.2, 6.1.5.2 m
11 lce_timer_lce_03_mgt 5.4.2, 6.1.3, 6.1.5.2 m
---------------------- Page: 17 ----------------------
SIST ETS 300 704-2:2001
Page 16
ETS 300 704-2: March 1997
Table A.11: ETS 300 474-2 [9] Table A.11: LLME procedures supported
Item LLME procedures Profile reference Profile status
ARI-D
6 mgt_mm_cc_coexistance 5.4.2, 6.1 m
9 mgt_call_ciphering_mgt 5.4.2, 6.1.2.6, m
6.1.2.9, 6.3.2.6,
6.3.2.7
9 mgt_external_handover 5.4.2, 6.1.2.9, 6.3.2.7 c1101
c1101: IF A.3/11 THEN m ELSE n/a
A.2.2 Messages
To express the profile requirements of ETS 300 370 [4], the following tables indicate the change of status
for support of NWK layer messages.
Some DECT information elements can be used to convey the information carried in some GSM
information elements, but the exact mapping has been considered as outside the scope of this ETS. Such
information elements hereafter are qualified as mandatory (m) to support their existence, as the mapping
itself is application dependent.
A.2.2.1 CC messages
Table A.12: ETS 300 474-2 [9] Table A.12: CC receiving (P to F) messages supported
Item CC receiving (P to F) Profile reference Profile status
Message name ARI-D
1 CC-SETUP 6.1.6.2, 6.1.6.2.6, See table A.2
6
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.