kSIST FprEN ISO 9073-8:2025
(Main)Nonwovens - Test methods - Part 8: Determination of liquid strike-through time (simulated urine) for nonwoven coverstocks (ISO/FDIS 9073-8:2025)
Nonwovens - Test methods - Part 8: Determination of liquid strike-through time (simulated urine) for nonwoven coverstocks (ISO/FDIS 9073-8:2025)
This document specifies a method for measuring the time of liquid (simulated urine) strike-through for nonwoven coverstocks. The method is suitable for making comparisons between different nonwoven coverstocks. It does not simulate in-use conditions for finished products.
Textilien - Prüfverfahren für Vliesstoffe - Teil 8: Bestimmung der Durchdringzeit von Flüssigkeiten (simulierter Urin) (ISO/FDIS 9073-8:2025)
Nontissés - Méthodes d’essai - Partie 8: Détermination du temps de transpercement des liquides (urine artificielle) pour les enveloppes de couche-culotte en nontissé (ISO/FDIS 9073-8:2025)
Le présent document spécifie une méthode pour la détermination du temps de transpercement des liquides (urine artificielle) pour les enveloppes de couche-culotte en non-tissé. La méthode permet d’établir des comparaisons entre différentes enveloppes de couche-culotte en non-tissé. Elle ne simule pas les conditions d’utilisation des produits finis.
Vlaknovine - Preskusne metode - 8. del: Ugotavljanje časa prodiranja tekočine skozi vlaknovino (simulirani seč) za netkane prekrivne tkanine (ISO/FDIS 9073-8:2025)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN ISO 9073-8:2024
01-november-2024
Vlaknovine - Preskusne metode - 8. del: Ugotavljanje časa prodiranja tekočine
skozi vlaknovino (simulirani seč) za netkane prekrivne tkanine (ISO/DIS 9073-
8:2024)
Nonwovens - Test methods - Part 8: Determination of liquid strike-through time
(simulated urine) for nonwoven coverstocks (ISO/DIS 9073-8:2024)
Textilien - Prüfverfahren für Vliesstoffe - Teil 8: Bestimmung der Durchdringzeit von
Flüssigkeiten (simulierter Urin) (ISO/DIS 9073-8:2024)
Nontissés - Méthodes d’essai - Partie 8: Détermination du temps de transpercement des
liquides (urine artificielle) pour les enveloppes de couche-culotte en nontissé (ISO/DIS
9073-8:2024)
Ta slovenski standard je istoveten z: prEN ISO 9073-8
ICS:
59.080.30 Tkanine Textile fabrics
oSIST prEN ISO 9073-8:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
oSIST prEN ISO 9073-8:2024
oSIST prEN ISO 9073-8:2024
DRAFT
International
Standard
ISO/DIS 9073-8
ISO/TC 38
Nonwovens — Test methods —
Secretariat: JISC
Part 8:
Voting begins on:
Determination of liquid strike- 2024-09-09
through time (simulated urine) for
Voting terminates on:
2024-12-02
nonwoven coverstocks
Nontissés — Méthodes d’essai —
Partie 8: Détermination du temps de transpercement des liquides
(urine artificielle)
ICS: 59.080.30
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 9073-8:2024(en)
oSIST prEN ISO 9073-8:2024
DRAFT
ISO/DIS 9073-8:2024(en)
International
Standard
ISO/DIS 9073-8
ISO/TC 38
Nonwovens — Test methods —
Secretariat: JISC
Part 8:
Voting begins on:
Determination of liquid strike-
through time (simulated urine) for
Voting terminates on:
nonwoven coverstocks
Nontissés — Méthodes d’essai —
Partie 8: Détermination du temps de transpercement des liquides
(urine artificielle)
ICS: 59.080.30
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 9073-8:2024(en)
ii
oSIST prEN ISO 9073-8:2024
ISO/DIS 9073-8:2024(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Material and reagents . 2
6 Apparatus . 2
7 Sampling . 2
8 Preparation and conditioning of test pieces . 3
9 Procedure . 3
10 Expression of results . 3
11 Test report . 3
Annex A (informative) Figures . 5
iii
oSIST prEN ISO 9073-8:2024
ISO/DIS 9073-8:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent
rights identified during the development of the document will be in the Introduction and/or on the ISO list of
patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO’s adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technic
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.