59.080 - Products of the textile industry
ICS 59.080 Details
Products of the textile industry
Produkte der Textilindustrie
Produits de l'industrie textile
Izdelki tekstilne industrije
General Information
Frequently Asked Questions
ICS 59.080 is a classification code in the International Classification for Standards (ICS) system. It covers "Products of the textile industry". The ICS is a hierarchical classification system used to organize international, regional, and national standards, facilitating the search and identification of standards across different fields.
There are 4198 standards classified under ICS 59.080 (Products of the textile industry). These standards are published by international and regional standardization bodies including ISO, IEC, CEN, CENELEC, and ETSI.
The International Classification for Standards (ICS) is a hierarchical classification system maintained by ISO to organize standards and related documents. It uses a three-level structure with field (2 digits), group (3 digits), and sub-group (2 digits) codes. The ICS helps users find standards by subject area and enables statistical analysis of standards development activities.
e-Library Subscription
Create subscription and get permanent access to documents within 59.080 - Products of the textile industry
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
ISO 10580:2010 specifies a general laboratory test method for determination of the area-specific emission rate of volatile organic compounds (VOC) and/or the vapour-phase VOC concentration under defined climate conditions.
ISO 10580:2010 describes emission test chambers used for the determination of the emission of volatile organic compounds from resilient, textile and laminate floor coverings.
- Standard29 pagesEnglish languagee-Library read for1 day
This document specifies the method for determination of the elongation under load and the residual deformation of coated fabrics.
- Standard4 pagesEnglish languagesale 15% off
- Standard4 pagesFrench languagesale 15% off
This document specifies a test method for the determination of the index ingredient of chemicals in coloured textile dyed with gallnut. Gallnut can be applied to both natural fibre and manufactured fibre.
- Standard5 pagesEnglish languagesale 15% off
This document specifies the performance requirements and test methods for filtration property and safety of materials for nonwoven general use face coverings for single use. This document specifies the following filtration properties: sub-micron filtration efficiency (PFE), water aerosol filtration efficiency with bacteria (BFE), water aerosol filtration efficiency with viruses (VFE), pollen particle filtration efficiency, and differential pressure. This document specifies the following safety items: free formaldehyde, specific azo dye, heavy metals, and pH. This document applies to nonwoven general use face coverings. It does not apply to medical face masks (see EN 14683 [5]), medical devices, or personal protective equipment (PPE) in the scope of ISO/TC94/SC15, Respiratory protective devices (RPD).
- Standard31 pagesEnglish languagesale 15% off
This document specifies a test method for the determination of heating performance of wearable heating e-textile products. Wearable heating textile products are made of e-textile parts including a portable battery for electric heating and conventional textile parts for garments. This document includes the test procedure for the heating temperature and power consumption of wearable heating garments such as jackets, vests, etc. Heating gloves and footwear are excluded. The safety and security of heating products are excluded, as the information on thermal safety limits for heating products is addressed in IEC 60335-2-17 [1] 1 and IEC 62368-1 [2]. The performance and safety of the portable battery are also excluded.
- Standard15 pagesEnglish languagee-Library read for1 day
This document specifies a test method for the determination of heating performance of wearable heating e-textile products. Wearable heating textile products are made of e-textile parts including a portable battery for electric heating and conventional textile parts for garments. This document includes the test procedure for the heating temperature and power consumption of wearable heating garments such as jackets, vests, etc. Heating gloves and footwear are excluded. The safety and security of heating products are excluded, as the information on thermal safety limits for heating products is addressed in IEC 60335-2-17 [1] 1 and IEC 62368-1 [2]. The performance and safety of the portable battery are also excluded.
- Standard15 pagesEnglish languagee-Library read for1 day
This document lists circular economy principles and provides guidance for circular economy across the textile value chain and value network and circularity for textile products.
This document applies to textiles, textile products, including non-textile components and materials.
This document excludes leather, fur products and footwear.
- Technical specification39 pagesEnglish languagee-Library read for1 day
This document lists circular economy principles and provides guidance for circular economy across the textile value chain and value network and circularity for textile products.
This document applies to textiles, textile products, including non-textile components and materials.
This document excludes leather, fur products and footwear.
- Technical specification39 pagesEnglish languagee-Library read for1 day
This document specifies requirements for 8-strand braided ropes, for 12-strand braided ropes, and for covered rope constructions (single braid, double braid and multi-core construction) for general purpose made of high modulus polyethylene (HMPE), and gives rules for their designation.
Many different types and grades of HMPE fibre exist which are commonly used to produce rope products. This document does not apply to all variations in strength or product performance.
- Standard14 pagesEnglish languagee-Library read for1 day
This document specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to ironing and to processing on hot cylinders.
This document is applicable for hot pressing when the textile is dry, damp or wet which is determined by the end-use of the textile.
- Standard12 pagesEnglish languagee-Library read for1 day
This document specifies a method of testing the adsorption efficiency of activated carbon fibres, such as nonwoven fabric or fibrous felt with a thickness of less than 20 mm for adsorption and removal of iodine isotopes (I131), included in air or gas flow (exhaust).
- Standard19 pagesEnglish languagesale 15% off
This document provides information on the design of geosynthetics for surface erosion control on slopes and river or channel banks. It does not apply to the design of geosynthetics for the stability of slopes and river or channel banks. It does not apply to coastal protection issues.
- Technical report55 pagesEnglish languagesale 15% off
This document specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to ironing and to processing on hot cylinders.
This document is applicable for hot pressing when the textile is dry, damp or wet which is determined by the end-use of the textile.
- Standard12 pagesEnglish languagee-Library read for1 day
This document specifies a method for the determination of the puncture resistance by measuring the force required to push a flat-ended plunger through geosynthetics.
The test is normally carried out on dry specimens conditioned in the specified atmosphere.
The test is applicable to most types of geosynthetic products, but does not apply to products with apertures greater than 10 mm.
- Standard13 pagesEnglish languagee-Library read for1 day
This document specifies a method for the measurement of ease of ignition of vertically oriented textile fabrics and industrial products in the form of single or multi-component textile fabrics (coated, quilted, multilayered, sandwich constructions, and similar combinations), when subjected to a small, defined flame.
- Standard23 pagesEnglish languagee-Library read for1 day
This document specifies a method for the measurement of flame spread times of vertically oriented textile fabrics and industrial products in the form of single or multi-component textile fabrics (coated, quilted, multilayered, sandwich combinations, and similar combinations) when subjected to a small, defined flame.
- Standard21 pagesEnglish languagee-Library read for1 day
This document specifies methods for the measurement of the thermal resistance and water-vapour resistance , under steady-state conditions, of e.g. fabrics, films, coatings, foams and leather, including multilayer assemblies, for use in clothing, quilts, sleeping bags, upholstery and similar textile or textile-like products.
The application of this measurement technique is restricted to a maximum thermal resistance and water-vapour resistance which depend on the dimensions and construction of the apparatus used (e.g. 2 m2·K/W and 700 m2·Pa/W respectively, for the minimum specifications of the equipment referred to in this document).
The test conditions used in this document are not intended to represent specific comfort situations, and performance specifications in relation to physiological comfort are not stated.
- Standard25 pagesEnglish languagee-Library read for1 day
This document specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to ironing and to processing on hot cylinders. This document is applicable for hot pressing when the textile is dry, damp or wet which is determined by the end-use of the textile.
- Standard5 pagesEnglish languagesale 15% off
- Standard6 pagesFrench languagesale 15% off
- Standard6 pagesFrench languagesale 15% off
This document specifies requirements for 8-strand braided ropes, for 12-strand braided ropes, and for covered rope constructions (single braid, double braid and multi-core construction) for general purpose made of high modulus polyethylene (HMPE), and gives rules for their designation.
Many different types and grades of HMPE fibre exist which are commonly used to produce rope products. This document does not apply to all variations in strength or product performance.
- Standard14 pagesEnglish languagee-Library read for1 day
This document specifies a test method for the determination of total amount of halogens (including fluorine, chlorine, bromine and iodine) present in textile products by combustion and ion chromatography (C-IC).
This document is applicable to all materials of textile products which are combustible, e.g. fibres, fabrics, plastic components (including coating), wood.
- Standard19 pagesEnglish languagee-Library read for1 day
This document specifies the main characteristics and test methods of new fibre ropes used for offshore station keeping. Fibre ropes for stationkeeping can be manufactured from different rope materials. This document provides general requirements applicable to all types of ropemaking materials. The subsequent parts of the ISO 18692 series provide the specific requirements for each rope core material (as quoted in the title of each part) that are not addressed within this document.
- Standard45 pagesEnglish languagesale 15% off
- Standard47 pagesFrench languagesale 15% off
This document specifies a test method for the determination of heating performance of wearable heating e-textile products. Wearable heating textile products are made of e-textile parts including a portable battery for electric heating and conventional textile parts for garments. This document includes the test procedure for the heating temperature and power consumption of wearable heating garments such as jackets, vests, etc. Heating gloves and footwear are excluded. The safety and security of heating products are excluded, as the information on thermal safety limits for heating products is addressed in IEC 60335-2-17 and IEC 62368‑1. The performance and safety of the portable battery are also excluded.
- Standard7 pagesEnglish languagesale 15% off
- Standard7 pagesFrench languagesale 15% off
This document specifies requirements for 8-strand braided ropes, for 12-strand braided ropes, and for covered rope constructions (single braid, double braid and multi-core construction) for general purpose made of high modulus polyethylene (HMPE), and gives rules for their designation. Many different types and grades of HMPE fibre exist which are commonly used to produce rope products. This document does not apply to all variations in strength or product performance.
- Standard7 pagesEnglish languagesale 15% off
- Standard7 pagesFrench languagesale 15% off
IEC 63517:2026 specifies a test method for the determination of heating performance of wearable heating e-textile products. Wearable heating textile products are made of e-textile parts including a portable battery for electric heating and conventional textile parts for garments. This document includes the test procedure for the heating temperature and power consumption of wearable heating garments such as jackets, vests, etc. Heating gloves and footwear are excluded. The safety and security of heating products are excluded, as the information on thermal safety limits for heating products is addressed in IEC 60335-2-17 and IEC 62368‑1. The performance and safety of the portable battery are also excluded.
- Standard11 pagesEnglish languagesale 15% off
- Standard11 pagesFrench languagesale 15% off
This document specifies methods for the measurement of the thermal resistance and water-vapour resistance , under steady-state conditions, of e.g. fabrics, films, coatings, foams and leather, including multilayer assemblies, for use in clothing, quilts, sleeping bags, upholstery and similar textile or textile-like products.
The application of this measurement technique is restricted to a maximum thermal resistance and water-vapour resistance which depend on the dimensions and construction of the apparatus used (e.g. 2 m2·K/W and 700 m2·Pa/W respectively, for the minimum specifications of the equipment referred to in this document).
The test conditions used in this document are not intended to represent specific comfort situations, and performance specifications in relation to physiological comfort are not stated.
- Standard25 pagesEnglish languagee-Library read for1 day
This document specifies requirements for coated fabrics for upholstered furniture, manufactured by applying to one side of a woven cloth a substantially continuous coating of a suitably plasticized polymer of vinyl chloride, or a copolymer the major constituent of which is vinyl chloride. NOTE Such coatings are known as poly(vinyl chloride) (PVC) coatings. This document is applicable to two grades (A and B) of PVC-coated woven fabrics.
- Standard9 pagesEnglish languagesale 15% off
This document specifies methods for the measurement of the thermal resistance and water-vapour resistance , under steady-state conditions, of e.g. fabrics, films, coatings, foams and leather, including multilayer assemblies, for use in clothing, quilts, sleeping bags, upholstery and similar textile or textile-like products. The application of this measurement technique is restricted to a maximum thermal resistance and water-vapour resistance which depend on the dimensions and construction of the apparatus used (e.g. 2 m2·K/W and 700 m2·Pa/W respectively, for the minimum specifications of the equipment referred to in this document). The test conditions used in this document are not intended to represent specific comfort situations, and performance specifications in relation to physiological comfort are not stated.
- Standard17 pagesEnglish languagesale 15% off
- Standard17 pagesFrench languagesale 15% off
This document specifies methods for the determination of seam maximum force of sewn seams when the force is applied perpendicularly to the seam. It describes the method known as the grab test.
The method defined in this document is applicable to woven textile fabrics, including fabrics which exhibit stretch characteristics imparted by the presence of an elastomeric fibre, mechanical or chemical treatment. It can be applicable to fabrics produced by other techniques. It is normally not applicable to geotextiles, nonwovens, coated fabrics, textile-glass woven fabrics and fabrics made from carbon fibres or polyolefin tape yarns.[2], [3], [4]
This method is applicable to straight seams only (obtained from previously sewn articles or prepared from fabric samples) and not to curved seams (see Annex B for considerations on seams).
The method is restricted to the use of constant-rate-of-extension (CRE) testing machines.
- Standard21 pagesEnglish languagee-Library read for1 day
This document specifies a method for the measurement of flame spread times of vertically oriented textile fabrics and industrial products in the form of single or multi-component textile fabrics (coated, quilted, multilayered, sandwich combinations, and similar combinations) when subjected to a small, defined flame.
- Standard21 pagesEnglish languagee-Library read for1 day
This document specifies a method for the measurement of ease of ignition of vertically oriented textile fabrics and industrial products in the form of single or multi-component textile fabrics (coated, quilted, multilayered, sandwich constructions, and similar combinations), when subjected to a small, defined flame.
- Standard23 pagesEnglish languagee-Library read for1 day
This document specifies a method for the determination of the puncture resistance by measuring the force required to push a flat-ended plunger through geosynthetics.
The test is normally carried out on dry specimens conditioned in the specified atmosphere.
The test is applicable to most types of geosynthetic products, but does not apply to products with apertures greater than 10 mm.
- Standard13 pagesEnglish languagee-Library read for1 day
This document specifies a method to test filtration performance of particulate matter of nonwovens. This document is applicable to nonwovens for air filtration.
- Standard10 pagesEnglish languagesale 15% off
This document defines the term nonwovens and provides auxiliary terminology to distinguish nonwovens from other materials.
- Standard11 pagesEnglish languagee-Library read for1 day
This document specifies a method for the measurement of ease of ignition of vertically oriented textile fabrics and industrial products in the form of single or multi-component textile fabrics (coated, quilted, multilayered, sandwich constructions, and similar combinations), when subjected to a small, defined flame.
- Standard15 pagesEnglish languagesale 15% off
- Standard15 pagesEnglish languagesale 15% off
- Standard15 pagesFrench languagesale 15% off
This document specifies a test method for the determination of total amount of halogens (including fluorine, chlorine, bromine and iodine) present in textile products by combustion and ion chromatography (C-IC).
This document is applicable to all materials of textile products which are combustible, e.g. fibres, fabrics, plastic components (including coating), wood.
- Standard19 pagesEnglish languagee-Library read for1 day
This document specifies a method for the measurement of flame spread times of vertically oriented textile fabrics and industrial products in the form of single or multi-component textile fabrics (coated, quilted, multilayered, sandwich combinations, and similar combinations) when subjected to a small, defined flame.
- Standard13 pagesEnglish languagesale 15% off
- Standard13 pagesFrench languagesale 15% off
This document specifies a method for the determination of the puncture resistance by measuring the force required to push a flat-ended plunger through geosynthetics. The test is normally carried out on dry specimens conditioned in the specified atmosphere. The test is applicable to most types of geosynthetic products, but does not apply to products with apertures greater than 10 mm.
- Standard6 pagesEnglish languagesale 15% off
- Standard6 pagesFrench languagesale 15% off
This document specifies a test method for the determination of total amount of halogens (including fluorine, chlorine, bromine and iodine) present in textile products by combustion and ion chromatography (C-IC). This document is applicable to all materials of textile products which are combustible, e.g. fibres, fabrics, plastic components (including coating), wood.
- Standard11 pagesEnglish languagesale 15% off
- Standard11 pagesFrench languagesale 15% off
This document specifies methods for the determination of seam maximum force of sewn seams when the force is applied perpendicularly to the seam. It describes the method known as the grab test.
The method defined in this document is applicable to woven textile fabrics, including fabrics which exhibit stretch characteristics imparted by the presence of an elastomeric fibre, mechanical or chemical treatment. It can be applicable to fabrics produced by other techniques. It is normally not applicable to geotextiles, nonwovens, coated fabrics, textile-glass woven fabrics and fabrics made from carbon fibres or polyolefin tape yarns.[2], [3], [4]
This method is applicable to straight seams only (obtained from previously sewn articles or prepared from fabric samples) and not to curved seams (see Annex B for considerations on seams).
The method is restricted to the use of constant-rate-of-extension (CRE) testing machines.
- Standard21 pagesEnglish languagee-Library read for1 day
This document specifies methods for the determination of seam maximum force of sewn seams when the force is applied perpendicularly to the seam. It describes the method known as the grab test. The method defined in this document is applicable to woven textile fabrics, including fabrics which exhibit stretch characteristics imparted by the presence of an elastomeric fibre, mechanical or chemical treatment. It can be applicable to fabrics produced by other techniques. It is normally not applicable to geotextiles, nonwovens, coated fabrics, textile-glass woven fabrics and fabrics made from carbon fibres or polyolefin tape yarns.[2], [3], [4] This method is applicable to straight seams only (obtained from previously sewn articles or prepared from fabric samples) and not to curved seams (see Annex B for considerations on seams). The method is restricted to the use of constant-rate-of-extension (CRE) testing machines.
- Standard13 pagesEnglish languagesale 15% off
- Standard13 pagesFrench languagesale 15% off
This document defines the term nonwovens and provides auxiliary terminology to distinguish nonwovens from other materials.
- Standard3 pagesEnglish languagesale 15% off
- Standard3 pagesFrench languagesale 15% off
- Standard3 pagesFrench languagesale 15% off
This document specifies a test method for the determination of snagging resistance of a fabric using a mace (spiked ball).
This test method is applicable to knitted and to woven fabrics.
- Standard17 pagesEnglish languagee-Library read for1 day
This document specifies test methods to measure the amount of test liquid (simulated urine) which runs down a nonwoven test specimen when a specified mass of test liquid is poured on the nonwoven test specimen superimposed on a standard absorbent medium and placed on an inclined plane.
This document is designed to compare run-off of nonwovens. It is not intended to simulate in use conditions for finished products.
The three methods are:
a) Option A - basic method for testing hydrophilic nonwovens, see Annex A.
b) Option B - repeated test, with the same test parameters as the basic method with additional information
in Option A, see Annex B.
c) Option C - modified method for testing hydrophobic nonwovens specifying another degree of incline, see Annex C.
The test method is designed to measure the repellency of hydrophobic nonwovens. At the standard inclination angle, Option A isn’t able to distinguish between different levels of hydrophobicity. By decreasing the inclination of the table, one can assess the difference in repellence of hydrophobic nonwovens.
For R&D purposes, other characteristics can be measured according to Annex D.
- Standard22 pagesEnglish languagee-Library read for1 day
IEC 63430:2025 specifies a container format for sensing data and its system requirements. This document applies to edge computing devices such as smartphones, home gateways, multimedia coordinators, etc., and cloud systems.
This document describes the following technical specifications:
- container format for wearable sensor data;
- Schema Repository that defines the parameters and syntax of sensor data;
- communication and system requirements between the edge computing device and Schema Repository.
- Standard29 pagesEnglish languagee-Library read for1 day
- Amendment5 pagesEnglish languagee-Library read for1 day
This document defines terms related to the functions, products, and properties in geosynthetics, and terms used in International Standards on geosynthetics.
- Standard17 pagesEnglish languagee-Library read for1 day
- Corrigendum3 pagesEnglish languagee-Library read for1 day
This document specifies a test method for the determination of snagging resistance of a fabric using a mace (spiked ball).
This test method is applicable to knitted and to woven fabrics.
- Standard17 pagesEnglish languagee-Library read for1 day
This document specifies test methods to measure the amount of test liquid (simulated urine) which runs down a nonwoven test specimen when a specified mass of test liquid is poured on the nonwoven test specimen superimposed on a standard absorbent medium and placed on an inclined plane.
This document is designed to compare run-off of nonwovens. It is not intended to simulate in use conditions for finished products.
The three methods are:
Option A - basic method for testing hydrophilic nonwovens, see Annex A.
Option B - repeated test, with the same test parameters as the basic method with additional information in Option A, see Annex B.
Option C - modified method for testing hydrophobic nonwovens specifying another degree of incline, see Annex C.
The test method is designed to measure the repellency of hydrophobic nonwovens. At the standard inclination angle, Option A isn’t able to distinguish between different levels of hydrophobicity. By decreasing the inclination of the table, one can assess the difference in repellence of hydrophobic nonwovens.
For R&D purposes, other characteristics can be measured according to Annex D.
- Standard22 pagesEnglish languagee-Library read for1 day