SIST EN 60684-3-216:2006/A2:2014

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 216: Heat-shrinkable, flame-retarded, limited-fire hazard sleeving

This sheet of IEC 60684-3 gives the requirements for four types of heat-shrinkable, flameretarded, limited-fire-hazard sleeving with a thermal endurance rating of 105 °C as shown below: Class A: thin wall shrink ratio 2:1 internal diameter up to 102,0 mm Class B: medium wall shrink ratio 2:1 internal diameter up to 60,0 mm Class C: thick wall shrink ratio 2:1 internal diameter up to 51,0 mm Class D: medium wall shrink ratio 3:1 internal diameter up to 40,0 mm These sleevings are normally supplied in the following colours: black, red, green, blue, white, yellow and green/yellow. Sizes or colours other than those listed in this standard may be available as custom items. These items shall be considered to comply with this standard if they comply with the property requirements listed in tables 5, 6, 7 and 8, excluding dimensions and mass. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.

Isolierschläuche - Teil 3: Anforderungen für einzelne Schlauchtypen - Blatt 216: Wärmeschrumpfende, flammwidrige Schläuche mit begrenztem Brandrisiko

Gaines isolantes souples - Partie 3: Spécifications pour types particuliers de gaines - Feuille 216: Gaines thermorétractables, retardées à la flamme, au risque de feu limité

Gibke izolacijske cevi - 3. del: Specifikacije za posamezne tipe cevi - 216. list: Toplotno skrčljive, ognjevarne cevi z majhno požarno nevarnostjo - Dopolnilo A2 (IEC 60684-3-216:2001/A2:2013)

Ta preglednica standarda IEC 60684-3 določa zahteve za štiri vrste toplotno skrčljivih, ognjevarnih cevi z majhno požarno nevarnostjo in oceno toplotne vzdržljivosti 105 °C, kot je prikazano spodaj:
Vrsta A: razmerje krčenja tanke stene 2:1, notranji premer do 102,0 mm
Vrsta B: razmerje krčenja srednje stene 2:1, notranji premer do 60,0 mm
Vrsta C: razmerje krčenja debele stene 2:1, notranji premer do 51,0 mm
Vrsta D: razmerje krčenja srednje stene 3:1, notranji premer do 40,0 mm
Cevi so običajno dobavljive v naslednjih barvah: črna, rdeča, zelena, morda, bela, rumena in zelena/rumena.
Druge velikosti ali barve od navedenih v tem standardu so lahko na voljo kot postavke po meri. Upoštevati je treba, da se te postavke skladajo s tem standardom, če so skladne z zahtevami za lastnosti, navedenimi v tabelah 5, 6, 7 in 8, razen z zahtevami za mere in težo. Materiali, ki so skladni s to specifikacijo, ustrezajo določenim ravnem delovanja. Vendar mora uporabnik material za določeno uporabo izbrati glede na dejanske zahteve, ki omogočajo ustrezno delovanje pri tej uporabi, in ne samo na podlagi te specifikacije.

General Information

• Status: Withdrawn
• Publication Date: 29-May-2014
• Withdrawal Date: 13-Sep-2022
• ICS: 29.035.20 - Plastics and rubber insulating materials
• Technical Committee: IIZS - Insulating materials and systems
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 13-Sep-2022
• Due Date: 06-Oct-2022
• Completion Date: 14-Sep-2022
• Ref Project: EN 60684-3-216:2005/A2:2014 - Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 216: Heat-shrinkable, flame-retarded, limited-fire hazard sleeving

Relations

• Replaced By: SIST EN IEC 60684-3-216:2019 - Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 216: Heat-shrinkable, flame- retarded, limited-fire-hazard sleeving (IEC 60684-3-216:2019)
• Effective Date: 08-Oct-2019
• Amends: SIST EN 60684-3-216:2006 - Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving -- Sheet 216: Heat-shrinkable, flame-retarded, limited-fire hazard sleeving
• Effective Date: 23-Oct-2012
• Amends: SIST EN 60684-3-216:2006 - Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving -- Sheet 216: Heat-shrinkable, flame-retarded, limited-fire hazard sleeving
• Effective Date: 28-Jan-2023
• Amends: SIST EN 60684-3-216:2006 - Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving -- Sheet 216: Heat-shrinkable, flame-retarded, limited-fire hazard sleeving
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60684-3-216:2006/A2:2014
01-julij-2014
*LENHL]RODFLMVNHFHYLGHO6SHFLILNDFLMH]DSRVDPH]QHWLSHFHYLOLVW
7RSORWQRVNUþOMLYHRJQMHYDUQHFHYL]PDMKQRSRåDUQRQHYDUQRVWMR'RSROQLOR$
,(&$
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet
216: Heat-shrinkable, flame-retarded, limited-fire hazard sleeving
Isolierschläuche - Teil 3: Anforderungen für einzelne Schlauchtypen - Blatt 216:
Wärmeschrumpfende, flammwidrige Schläuche mit begrenztem Brandrisiko
Gaines isolantes souples - Partie 3: Spécifications pour types particuliers de gaines -
Feuille 216: Gaines thermorétractables, retardées à la flamme, au risque de feu limité
Ta slovenski standard je istoveten z: EN 60684-3-216:2005/A2:2014
ICS:
29.035.20 3ODVWLþQLLQJXPHQLL]RODFLMVNL Plastics and rubber insulating
PDWHULDOL materials
SIST EN 60684-3-216:2006/A2:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60684-3-216:2006/A2:2014

---------------------- Page: 2 ----------------------

SIST EN 60684-3-216:2006/A2:2014

EUROPEAN STANDARD
EN 60684-3-216/A2

NORME EUROPÉENNE
April 2014
EUROPÄISCHE NORM

ICS 29.035.20


English version


Flexible insulating sleeving -
Part 3: Specifications for individual types of sleeving -
Sheet 216: Heat-shrinkable, flame-retarded, limited-fire hazard sleeving
(IEC 60684-3-216:2001/A2:2013)


Gaines isolantes souples -  Isolierschläuche -
Partie 3: Spécifications pour types Teil 3: Anforderungen für einzelne
particuliers de gaines - Schlauchtypen -
Feuille 216: Gaines thermorétractables, Blatt 216: Wärmeschrumpfende,
retardées à la flamme, au risque de feu flammwidrige Schläuche mit begrenztem
limité Brandrisiko
(CEI 60684-3-216:2001/A2:2013) (IEC 60684-3-216:2001/A2:2013)




This amendment A2 modifies the European Standard EN 60684-3-216:2005; it was approved by CENELEC on
2014-01-16. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2014 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60684-3-216:2005/A2:2014 E

---------------------- Page: 3 ----------------------

SIST EN 60684-3-216:2006/A2:20
...