SIST EN 28736:1996

Taper pins with internal thread, unhardened (ISO 8736:1986)

Specifies the characteristics of products with metric dimensions and nominal diameters from 6 mm up to and including 50 mm; tabulates thread sizes M 6 up to M 50 with nominal lengths from 16 mm up to 200 mm and specifications with reference to International Standards; gives an example for the designation.

Kegelstifte mit Innengewinde, ungehärtet (ISO 8736:1986)

Goupilles de position conique a trou taraudé, non trempées (ISO 8736:1986)

La présente Norme internationale spécifie les caractéristiques des goupilles de position coniques à trou taraudé, non trempées, de dimensions métriques et de diamètre nominal, d1, de 6 à 50 mm inclus.

Stožčasti zatiči z notranjim navojem, nekaljeni

General Information

• Status: Published
• Publication Date: 31-Mar-1996
• ICS: 21.060.50 - Pins, nails
• Technical Committee: ISEL - Mechanical elements
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Apr-1996
• Due Date: 01-Apr-1996
• Completion Date: 01-Apr-1996
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: EN 28736:1992 - Taper pins with internal thread, unhardened (ISO 8736:1986)

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kegelstifte mit Innengewinde, ungehärtet (ISO 8736:1986)Goupilles de position conique a trou taraudé, non trempées (ISO 8736:1986)Taper pins with internal thread, unhardened (ISO 8736:1986)21.060.50Pi
...