SIST EN 301 070-3 V1.1.2:2005

• Abstract:

  TSS&TP for part 1

• Status: Published
• Publication Date: 31-Dec-2004
• ICS: 33.080 - Integrated Services Digital Network (ISDN)
• Technical Committee: SPN - Services and Protocols for Networks
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Jan-2005
• Due Date: 01-Jan-2005
• Completion Date: 01-Jan-2005
• Mandate: BC-T-338
• Ref Project: ETSI EN 301 070-3 V1.1.2 (2000-11) - Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN User Part (ISUP) version 3 interactions with the Intelligent Network Application Part (INAP); Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification

SIST EN 301 070-3 V1.1.2:2005 is the Slovenian adoption of ETSI EN 301 070-3 Version 1.1.2. It specifies the Test Suite Structure and Test Purposes (TSS&TP) for validating how Integrated Services Digital Network (ISDN) Signalling System No. 7 (SS7) ISDN User Part (ISUP) version 3 interacts with the Intelligent Network Application Part (INAP) in exchanges.

The standard is written for conformance testing of exchanges that implement ISUPv3 in the Call Control Function (CCF) and INAP Capability Set 1 (CS1) in the Service Switching Function (SSF). In practice, it tells a test team what to test, how the tests are grouped, and which protocol behaviours are covered.

What does SIST EN 301 070-3 V1.1.2:2005 specify?

SIST EN 301 070-3 V1.1.2:2005 specifies the validation test specification for the interaction between ISUPv3 and INAP CS1. It applies to exchanges with ISUPv3 in the CCF and INAP CS1 in the SSF, and it focuses on validation testing rather than compatibility testing.

The document is organized into these main clauses:

• Clause 1 - Scope
• Clause 2 - References
• Clause 3 - Definitions and abbreviations
• Clause 4 - Implementation under test and test methods
• Clause 5 - Test Suite Structure (TSS)
• Clause 6 - Test purposes (TP)
• Clause 7 - Test coverage

What are the key requirements of SIST EN 301 070-3 V1.1.2:2005?

The standard makes the test approach very specific so that different labs can test the same exchange in the same way.

• It uses the distributed multi-party Abstract Test Method (ATM) and writes the Abstract Test Suite (ATS) in concurrent TTCN. This matters because the interaction spans multiple signalling points and circuit paths, so testing has to control several ends at once.
• It treats the System Under Test (SUT) as an exchange and observes the ISUP and INAP procedures on Signalling System No. 7 links. That means the test team checks both call-control signalling and INAP signalling at the network node interface.
• It defines a mixed test configuration with a Main Test Component (MTC), Parallel Test Components (PTCs), and Points of Control and Observation (PCOs) such as LAB, LAC, LAD, CAC, and CAD. In practice, this tells the lab where to inject messages and where to watch circuit and signalling behaviour.
• It groups test purposes into valid and inopportune behaviour. This helps buyers and quality teams see whether the implementation is checked mainly for expected operation, with abnormal behaviour handled only in selected cases.
• It gives a naming convention for Test Purposes (TPs) based on the Test Suite Structure. That makes the test list traceable, so a conformance report can point to the exact functional area under test.
• It covers INAP basic call mapping, including Initial Detection Point (IDP) and Connect operation mappings, plus continuity check, segmentation, ReleaseCall handling, and transfer of called IN number information. These tests matter because they verify that digits, numbering data, and call-control indicators are transferred correctly between ISUP and INAP.
• It includes user interactive dialogue, call gapping, service filtering, and SCP initiated call cases. These are the service features that often decide whether an exchange can support advanced intelligent-network call handling in real deployments.

What terms does SIST EN 301 070-3 V1.1.2:2005 define?

• Abstract Test Case (ATC) - a complete, independent set of test actions for one specific test purpose.
• Abstract Test Method (ATM) - the way the implementation is tested at an abstract level, independent of a particular test rig.
• Abstract Test Suite (ATS) - the full collection of abstract test cases for the standard.
• Implementation Under Test (IUT) - the protocol implementation being exercised in testing.
• Means of Testing (MOT) - the equipment and procedures used to derive, select, parameterize, and run the tests and produce a conformance log.
• Protocol Implementation Conformance Statement (PICS) - the supplier's statement of which protocol capabilities are implemented.
• Protocol Implementation eXtra Information for Testing (PIXIT) - extra implementation and test-environment information needed to run the test suite.
• Point of Control and Observation (PCO) - the place in the test environment where events are controlled and observed.

Who uses SIST EN 301 070-3 V1.1.2:2005?

SIST EN 301 070-3 V1.1.2:2005 is used by conformance test laboratories, exchange manufacturers, network operators, and quality teams that validate signalling behaviour. It is especially relevant when an exchange must prove correct interaction between the call-control side and the intelligent-network side.

It is also useful for engineers preparing PICS and PIXIT data, because the test purposes rely on those declarations to select the right cases.

Which standards are used with SIST EN 301 070-3 V1.1.2:2005?

The document relies on these named references:

• ETSI EN 301 070-1 - the protocol specification for ISUPv3 and INAP interaction
• ETSI EN 300 356-1 - referenced for ISUP basic-services context
• ISO/IEC 9646-1 - conformance testing methodology and framework
• ISO/IEC 9646-3 - Tree and Tabular Combined Notation (TTCN)
• ISO/IEC 9646-7 - Implementation Conformance Statements
• ITU-T Recommendation Q.1214 - distributed functional plane for intelligent network CS-1
• ITU-T Recommendation Q.1218 - interface recommendation for intelligent network CS-1
• ITU-T Recommendation E.164 - international public telecommunication numbering plan
• ITU-T Recommendations Q.701 to Q.707 - Message Transfer Part (MTP) for Signalling System No. 7

What does the SIST EN 301 070-3 V1.1.2:2005 document contain?

The document contains the test suite structure, the test-purpose naming rules, and a large set of individual test-purpose tables for specific ISUP-INAP behaviours. It also includes the implementation-under-test model, the test configuration diagrams, and a coverage summary that counts the test purposes by functional group.

For practical use, the document tells a test lab what signalling elements to stimulate, what network responses to expect, and which pre-test conditions must be arranged before a case is run. It is therefore mainly a conformance testing document for design verification, lab validation, and acceptance testing.

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN User Part (ISUP) version 3 interactions with the Intelligent Network Application Part (INAP); Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification33.080Digitalno omrežje z integriranimi storitvami (ISDN)Integrated Services Digital Network (ISDN)ICS:Ta slovenski standard je istoveten z:EN 301 070-3 Version 1.1.2SIST EN 301 070-3 V1.1.2:2005en01-januar-2005SIST EN 301 070-3 V1.1.2:2005SLOVENSKI
STANDARD
ETSIEN301070-3V1.1.2(2000-11)EuropeanStandard(Telecommunicationsseries)IntegratedServicesDigitalNetwork(ISDN);SignallingSystemNo.7;ISDNUserPart(ISUP)version3interactionswiththeIntelligentNetworkApplicationPart(INAP);Part3:TestSuiteStructureandTestPurposes(TSS&TP)specificationSIST EN 301 070-3 V1.1.2:2005

ETSIETSIEN301070-3V1.1.2(2000-11)2ReferenceDEN/SPS-01044-3KeywordsINAP,ISDN,ISUP,TSS&TP,SS7ETSI650RoutedesLuciolesF-06921SophiaAntipolisCedex-FRANCETel.:[phone]Fax:[phone]SiretN°34862356200017-NAF742CAssociationàbutnonlucratifenregistréeàlaSous-PréfecturedeGrasse(06)N°7803/88ImportantnoticeIndividualcopiesofthepresentdocumentcanbedownloadedfrom:http://www.etsi.orgThepresentdocumentmaybemadeavailableinmorethanoneelectronicversionorinprint.Inanycaseofexistingorperceiveddifferenceincontentsbetweensuchversions,thereferenceversionisthePortableDocumentFormat(PDF).Incaseofdispute,thereferenceshallbetheprintingonETSIprintersofthePDFversionkeptonaspecificnetworkdrivewithinETSISecretariat.Usersofthepresentdocumentshouldbeawarethatthedocumentmaybesubjecttorevisionorchangeofstatus.InformationonthecurrentstatusofthisandotherETSIdocumentsisavailableathttp://www.etsi.org/tb/status/Ifyoufinderrorsinthepresentdocument,sendyourcommentto:[e-mail]opartmaybereproducedexceptasauthorizedbywrittenpermission.Thecopyrightandtheforegoingrestrictionextendtoreproductioninallmedia.©EuropeanTelecommunicationsStandardsInstitute2000.Allrightsreserved.SIST EN 301 070-3 V1.1.2:2005

ETSIETSIEN301070-3V1.1.2(2000-11)3ContentsIntellectualPropertyRights.4Foreword.41Scope.52References.53Definitionsandabbreviations.63.1Definitions.63.2Abbreviations.74Implementationundertestandtestmethods.84.1Identificationofthesystemandimplementationundertest.84.2ATMandtestingconfigurationforISUPv3.84.3INexchange.95TestSuiteStructure(TSS).116Testpurposes(TP).126.1Introduction.126.2Testpurpose(TP)namingconvention.126.2.1Sourceoftestpurposedefinition.136.2.2Testpurposestructure.136.3TestpurposesfortheISUP-INAPinteraction.136.3.1INAPbasiccall.136.3.1.1InitialDetectionPoint.136.3.1.2ConnectOperation.176.3.1.3OtherINAPbasiccallrelatedissues.226.3.2INcallwithSCPrequesttocollectfurtherdigits.246.3.3DetectionPointProcessing.246.3.4SetupofanINcalltodestinationB.276.3.4.1SuccessfulCallSetup.276.3.4.2Abnormalconditions.296.3.5Userinteractivedialogue(in-band).296.3.5.1SSPsupportsrequestedIPCapabilities.306.3.5.2Assistmethod-procedureintheinitiatingSSP.366.3.5.3Hand-offmethod-procedureintheinitiatingSSP.416.3.5.3.1BasicCallscenarios.416.3.5.4Assist/Hand-offmethod-procedureintheassistingSSP.416.3.5.4.1BasicCallscenarios.416.3.6Callgapping.426.3.7Servicefiltering.456.3.8SCPinitiatedcall.476.3.8.1Successfulcallset-up.477TestCoverage.48History.49SIST EN 301 070-3 V1.1.2:2005

ETSIETSIEN301070-3V1.1.2(2000-11)4IntellectualPropertyRightsIPRsessentialorpotentiallyessentialtothepresentdocumentmayhavebeendeclaredtoETSI.TheinformationpertainingtotheseessentialIPRs,ifany,ispubliclyavailableforETSImembersandnon-members,andcanbefoundinETSISR000314:"IntellectualPropertyRights(IPRs);Essential,orpotentiallyEssential,IPRsnotifiedtoETSIinrespectofETSIstandards",whichisavailablefromtheETSISecretariat.LatestupdatesareavailableontheETSIWebserver(http://www.etsi.org/ipr).PursuanttotheETSIIPRPolicy,noinvestigation,includingIPRsearches,hasbeencarriedoutbyETSI.NoguaranteecanbegivenastotheexistenceofotherIPRsnotreferencedinETSISR000314(ortheupdatesontheETSIWebserver)whichare,ormaybe,ormaybecome,essentialtothepresentdocument.ForewordThisEuropeanStandard(Telecommunicationsseries)hasbeenproducedbyETSITechnicalCommitteeServicesandProtocolsforAdvancedNetworks(SPAN).Thepresentdocumentispart3ofamulti-partENcoveringtheinteractionsbetweenISDNUserPart(ISUP)version3andIntelligentNetworkApplicationPart(INAP)inthescopeofINCapabilitySet1(CS1),asidentifiedbelow:Part1:"Protocolspecification[ITU-RecommendationQ.1600(1997),modified]";Part2:"ProtocolImplementationConformanceStatement(PICS)proformaspecification";Part3:"TestSuiteStructureandTestPurposes(TSS&TP)specification";Part4:"AbstractTestSuite(ATS)andpartialProtocolImplementationeXtraInformationforTesting(PIXIT)proformaspecification".NationaltranspositiondatesDateofadoptionofthisEN:27October2000DateoflatestannouncementofthisEN(doa):31January2001DateoflatestpublicationofnewNationalStandardorendorsementofthisEN(dop/e):31July2001DateofwithdrawalofanyconflictingNationalStandard(dow):31July2001SIST EN 301 070-3 V1.1.2:2005

ETSIETSIEN301070-3V1.1.2(2000-11)51ScopeThepresentdocumentcontainsthevalidation(conformance)testspecificationfortheinteractionbetweenISUPv3andINAPCS1definedin[1].ThepresentdocumentappliesonlytoexchangeshavingimplementedtheISUPv3protocolspecificationinthecallcontrolfunction(CCF)andtheINAPCS1intheserviceswitchingfunction(SSF)oftheexchange.ItisapplicableforvalidationtestingofalltypesofexchangesasdefinedintheISUPv3protocolspecification.Thepresentdocumentdoesnotdealwithcompatibilitytesting.Themaintextpartofthepresentdocumentpresentstherequirementsregardingthechosentestmethod,conventionsusedwithintheATS,theTestSuiteStructureandTestPurposes(TSS&TP)fortheinteractionbetweenISUPv3andINAPCS1.2ReferencesThefollowingdocumentscontainprovisionswhich,throughreferenceinthistext,constituteprovisionsofthepresentdocument.• Referencesareeitherspecific(identifiedbydateofpublication,editionnumber,versionnumber,etc.)ornon-specific.• Foraspecificreference,subsequentrevisionsdonotapply.• Foranon-specificreference,thelatestversionapplies.• Anon-specificreferencetoanETSshallalsobetakentorefertolaterversionspublishedasanENwiththesamenumber.[1]ETSIEN301070-1(V1.2):"IntegratedServicesDigitalNetwork(ISDN);SignallingSystemNo.7;ISDNUserPart(ISUP)version3interactionswiththeIntelligentNetworkApplicationPart(INAP);Part1:Protocolspecification[ITU-TRecommendationQ.1600(1997),modified]".[2]ETSIEN300356-1:"IntegratedServicesDigitalNetwork(ISDN);SignallingSystemNo.7;ISDNUserPart(ISUP)version4fortheinternationalinterface;Part1:Basicservices[ITU-TRecommendationsQ.761toQ.764modified]".[3]ISO/IEC9646-1(1997):"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part1:GeneralConcepts".[4]ISO/IEC9646-3(1992):"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part3:TheTreeandTabularCombinedNotation(TTCN)".[5]ISO/IEC9646-7(1995):"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part7:ImplementationConformanceStatements".[6]ITU-TRecommendationQ.1214(1995):"DistributedfunctionalplaneforintelligentnetworkCS-1".[7]ITU-TRecommendationQ.1218(1995):"InterfaceRecommendationforintelligentnetworkCS-1".[8]ITU-TRecommendationE.164(1997):"Theinternationalpublictelecommunicationnumberingplan".[9]ITU-TRecommendationQ.701(1993):"Functionaldescriptionofthemessagetransferpart(MTP)ofSignallingSystemNo.7".[10]ITU-TRecommendationQ.702(1988):"Signallingdatalink".[11]ITU-TRecommendationQ.703(1996):"Signallinglink".[12]ITU-TRecommendationQ.704(1996):"Signallingnetworkfunctionsandmessages".SIST EN 301 070-3 V1.1.2:2005

ETSIETSIEN301070-3V1.1.2(2000-11)6[13]ITU-TRecommendationQ.705(1993):"Signallingnetworkstructure".[14]ITU-TRecommendationQ.706(1993):"Messagetransferpartsignallingperformance".[15]ITU-TRecommendationQ.707(1988):"Testingandmaintenance".3Definitionsandabbreviations3.1DefinitionsForthepurposesofthepresentdocument,thefollowingtermsanddefinitionsapply:-termsdefinedinISDNUserPart(ISUP)referencespecifications[1]and[2];-termsdefinedinISO/IEC9646-1[3],ISO/IEC9646-3[4]andinISO/IEC9646-7[5].Inparticular,thefollowingtermsanddefinitionsapply:AbstractTestCase(ATC):completeandindependentspecificationoftheactionsrequiredtoachieveaspecifictestpurpose,definedatthelevelofabstractionofaparticularAbstractTestMethod,startinginastabletestingstateandendinginastabletestingstate(seeISO/IEC9646-1[3],subclause3.3.3).AbstractTestMethod(ATM):descriptionofhowanIUTistobetested,givenatanappropriatelevelofabstractiontomakethedescriptionindependentofanyparticularrealizationofaMeansofTesting,butwithenoughdetailtoenableabstracttestcasestobespecifiedforthismethod(seeISO/IEC9646-1[3],subclause3.3.5).AbstractTestSuite(ATS):testsuitecomposedofabstracttestcases(seeISO/IEC9646-1[3],subclause3.3.6).ImplementationUnderTest(IUT):implementationofoneormoreOSIprotocolsinanadjacentuser/providerrelationship,beingpartofarealopensystemwhichistobestudiedbytesting(seeISO/IEC9646-1[3],subclause3.3.43).ISDNnumber:numberconformingtothenumberingandstructurespecifiedinITU-TRecommendationE.164[8].MeansofTesting(MOT):combinationofequipmentandproceduresthatcanperformthederivation,selection,parameterizationandexecutionoftestcases,inconformancewithareferencestandardizedATS,andcanproduceaconformancelog(seeISO/IEC9646-1[3],subclause3.3.54).PICSproforma:document,intheformofaquestionnaire,whichwhencompletedforanimplementationorsystembecomesthePICS.PIXITproforma:document,intheformofaquestionnaire,whichwhencompletedfortheIUTbecomesthePIXIT.PointofControlandObservation(PCO):pointwithinatestingenvironmentwheretheoccurrenceoftesteventsistobecontrolledandobserved,asdefinedinanAbstractTestMethod(seeISO/IEC9646-1[3],subclause3.3.64).Pre-testcondition:settingorstateintheIUTwhichcannotbeachievedbyprovidingstimulusfromthetestenvironment.ProtocolImplementationConformanceStatement(PICS):statementmadebythesupplierofaprotocolclaimedtoconformtoagivenspecification,statingwhichcapabilitieshavebeenimplemented(seeISO/IEC9646-1[3],subclauses3.3.39and3.3.80).ProtocolImplementationeXtraInformationforTesting(PIXIT):statementmadebyasupplierorimplementorofanIUT(protocol)whichcontainsorreferencesalloftheinformationrelatedtotheIUTanditstestingenvironment,whichwillenablethetestlaboratorytorunanappropriatetestsuiteagainsttheIUT(seeISO/IEC9646-1[3],subclauses3.3.41and3.3.81).SystemUnderTest(SUT):realopensysteminwhichtheIUTresides(seeISO/IEC9646-1[3],subclause3.3.103).SIST EN 301 070-3 V1.1.2:2005

ETSIETSIEN301070-3V1.1.2(2000-11)73.2AbbreviationsForthepurposesofthepresentdocument,thefollowingabbreviationsapply:ACONAbnormalCONditionsAM_ISSPAssistMethod-procedureintheInitiatingSSPASPAbstractServicePrimitiveA-SSPAssistingSignallingSwitchingPointATMAbstractTestMethodATSAbstractTestSuiteCCFCallControlFunctionCDCallDeflectionCGCallGappingCONCONnectoperationCS1INCapabilitySetNo1DPPDetectionPointProcessingHOM_ASSPHand-OffMethod–procedureintheAssistingSSPHOM_ISSPHand-OffMethod–procedureintheInitiatingSSPICSImplementationConformanceStatementIDPInitialDetectionPointoperationINAPIntelligentNetworkApplicationProtocolINBSetupofanINcalltodestinationBINBCINAPBasicCallINCDINcallwithSCPrequesttoCollectfurtherDigitsIPCSSPsupportsrequestedIPCapabilitiesISDNIntegratedServicesDigitalNetworkISSImpactonSupplementaryServicesI-SSPInitiatingSignallingSwitchingPointISUPISDNUserPartIUTImplementationUnderTestMOTMeansOfTestingMTPMessageTransferPartOINOtherINbasiccallrelatedissuesPICSProtocolImplementationConformanceStatementPIXITProtocolImplementationeXtraInformationforTestingSCP_ICSCPInitiatedCallSCSSuccessfulCallSetupSFServiceFilteringSPSignallingPointSSFServiceSwitchingFunctionSUTSystemUnderTestTPTestPurpose(contextdependent)TSS&TPTestSuiteStructureandTestPurposesTSSTestSuiteStructureTTCNTreeandTabularCombinedNotationUIDUserInteractiveDialogue(in-band)VValidbehaviourstimulusTheISUPmessageacronymscanbefoundintable2ofITU-TRecommendationQ.762asendorsedby[2].ThefollowingabbreviationsapplyforISUPparametersandparametervalues:AdSgAddressSignalsCgPNCallingPartyNumberGenNotGenericNotificationTMRTransmissionMediumRequirementUSIUserServiceIndicatorSIST EN 301 070-3 V1.1.2:2005

ETSIETSIEN301070-3V1.1.2(2000-11)84Implementationundertestandtestmethods4.1IdentificationofthesystemandimplementationundertestThesystemundertest(SUT)isanexchange.Theimplementationundertest(IUT)istheISUPv3implementationinthisexchange,mainlythepartresponsiblefortheinteractionbetweenISUPv3andINAPCS1whichtakesplaceintheCCFandSSF,asshowninfigure1.Thefollowingmainsubjectshavetobeconsideredinthisarea:a)detectionpointprocessingintheCCF;b)receiptofINAPCS1operationsintheSSF.INAPISUPISUPExchangeSSFCCFINAPCS1ISUPv3SUTIUTINAP-IntelligentNetworkApplicationProtocolCS1-CapatibilitySet1ISUP-ISDNUserPartIUT-ImplementationUnderTestSUT-SystemUnderTestSSF-ServiceSwitchingFunctionCCF-CallControlFunctionFigure1:SystemundertestTheISUPsignallingprotocolandtheINAPcanbeobservedontheSSNo.7linkonthenetworknodalinterface(NNI).OnthesignallinglinkspointingtotheCallControlFunction(CCF)theISDNUserPartprocedurescanbeobserved.ThesignallinglinkemergingformtheSSFtheINAPprocedurescanbeobserved.4.2ATMandtestingconfigurationforISUPv3TheAbstractTestMethod(ATM)chosenfortheInteractionbetweenISUPv3andINAPtestingspecificationisthedistributedmulti-partytestmethod.TheATMisdefinedatanappropriatelevelofabstractionsothatthetestcasesmaybespecifiedappropriately,withoutaddingrestrictionstotheimplementationundertest.TheATSiswritteninconcurrentTTCN.SIST EN 301 070-3 V1.1.2:2005

ETSIETSIEN301070-3V1.1.2(2000-11)94.3INexchangeTheconfigurationproposedfortestingexchangeshavinganSSF(INexchanges)isshowninfigure2/Q.ISIN_TEST.InordertotesttheprotocolandfunctionalityoftheseexchangesoneneedstoconsidertheincomingandoutgoingISUPcircuitsandthesignallinglinktotheSCP.TheIUTisobservedandcontrolledfromtwoISUPlinkswithassociatedcircuits.Thepointsofcontrolandobservation(PCO)arelabelledLACandCACononeside,andLADandCADontheother.ThenamingconventionforthesignallinglinkPCOis'L'followedbytwolettersindicatingtheinterface.SimilarlyforthecircuitPCO,thenameis'C'followedbythesametwolettersdesignatingtheinterface.TheLABPCOisusedbythelowertester(LT)tocontrolandobservetheINAPonthesignallingtotheSCP.TheLACandLADPCOsareusedbythelowertesters(LT)forcontrollingtheISUPsignallinglink,whereastheCACandCADPCOsareusedbythelowertestersforobservingcircuitrelatedevents,suchasconnectivity,DTMFtones,announcements,etc.TheISUPPDUstobesentandobservedontheLACandLADPCOssideallowforPDUconstraintstobespecifiedandcodeddowntothebit-level.ThesameappliesfortheINAPPDUsontheLABPCO.TheunderlyingnetworkserviceprovideristheMessageTransferPart(MTP)protocolasspecifiedinITU-TRecommendationsQ.701[9]toQ.707[15].Figure2/Q.ISIN_TESTshowstheactualusedconfigurationforINexchanges,withamaintestingcomponent(MTC),responsiblefortheABinterfaceandtwoslaveparalleltestingcomponents(PTCs),responsiblefortheACandADinterfaces.Thetestco-ordinationprocedures(TCP)allowforcommunicationbetweenthetesters.Thetestcomponentsaremostlyimplicitlyco-ordinated(asynchronously);theTCPsareonlyusedwhenitisnecessarytoobtaintheverdictfromtheparalleltestcomponent.Theleftandrightsideparalleltestcomponentsmaybeofanykind:theymaybeinternationalornationalISUP.SIST EN 301 070-3 V1.1.2:2005

ETSIETSIEN301070-3V1.1.2(2000-11)10NetworkserviceproviderCABLABTCPPTCCCFSPBMTCISUPsignalling,circuitsSSFSPAIUT-ImplementationUnderTestMTC-MainTestComponentPCO-PointofControlandObservationPTC-ParallelTestComponentSP-SignallingPointSSF-ServiceSwitchingFunctionCCF-CallControlFunctionLAB-PCOforsignallinglinkABCAB-CircuitPCOonABinterfaceLAC-PCOforsignallinglinkACCAC-CircuitPCOonACinterfaceLAD-PCOforsignallinglinkADCAD-CircuitPCOonADinterfaceTCP-TestCoordinationProceduresTCPNetworkserviceproviderISUPsignalling,circuitsPTCLACCACSPCINAPsignalling,circuitsSPDLADCADFigure2:ISUPmixedtestconfigurationforlocalexchangesSIST EN 301 070-3 V1.1.2:2005

ETSIETSIEN301070-3V1.1.2(2000-11)115TestSuiteStructure(TSS)ISUP_INAP_Interaction1INBC1IDP2CON3OIN2INCD3DPPForeachleaf:4INBV1SCS2ACON5UID1IPC2AM_ISSP3HOM_ISSP4HOM_ASSP6CG7SF8SCP_IC1SCSFigure3:TestsuitestructureTestSuiteStructure(TSS)namingconventionsare:INBCINAPBasicCallIDPInitialDetectionPointoperationCONCONnectoperationOINOtherINbasiccallrelatedissuesINCDINcallwithSCPrequesttoCollectfurtherDigitsDPPDetectionPointProcessingINBSetupofanINcalltodestinationBSIST EN 301 070-3 V1.1.2:2005

ETSIETSIEN301070-3V1.1.2(2000-11)12SCSSuccessfulCallSetupACONAbnormalCONditionsISSImpactonSupplementaryServicesUIDUserInteractiveDialogue(in-band)IPCSSPsupportsrequestedIPCapabilitiesAM_ISSPAssistMethod-procedureintheInitiatingSSPHOM_ISSPHand-OffMethod–procedureintheInitiatingSSPHOM_ASSPHand-OffMethod–procedureintheAssistingSSPCGCallGappingSFServiceFilteringSCP_ICSCPInitiatedCallVValidbehaviourstimulus6Testpurposes(TP)6.1IntroductionForeachtestrequirementaTestPurpose(TP)isdefined.6.2Testpurpose(TP)namingconventionTestPurposesarenumberedascendingwithineachgroup.GroupsareorganizedaccordingtotheTestSuiteStructure(TSS)downtothelastbutonelevel.TheclassificationintheV/IgroupsisdonebytheinclusionofVorIinthetestcasename.Additionalqualifiers,informoflowercaseletters,areaddedtoidentifyvariantswithinonegenerictestcase(seetable1).Table1:TPIdentifiernamingconventionschemeIdentifier:ISN____{}_{}ISN=ISUPINAPInteraction=Onecharacterrepresentingthetestgroup:V:ValidstimulusI:Inopportunestimulus=Sequencenumberinthetestsuitestructure=Sequencenumberusedwithinthegroup{}=Optionaladditionalnumberused{}=Optionallower-casecharacterdistinguishingtestswithsamereferencenumberSIST EN 301 070-3 V1.1.2:2005

ETSIETSIEN301070-3V1.1.2(2000-11)136.2.1SourceoftestpurposedefinitionThetestpurposescovervalidationtestingaspectsandweredevelopedwithinETSI.6.2.2TestpurposestructureThetestpurposestructureoverlapswiththeTestSuiteStructure(TSS).TestpurposesthattestnormalbehaviourhavebeengroupedintheV-validbehaviourgroup.TestpurposesthattesttheIUTbehaviourinsituationsthatarenotnormaloperationhavebeengroupedintheI-Inopportunestimulusgroup.6.3TestpurposesfortheISUP-INAPinteractionAllofthefollowingtestpurposesbelongtothemaingroupISUP_INAP_Interaction.Eachtestpurposeispresentedinaseparatetable.Thefirstrowofthetablecontainsthefollowingitems:TSSIdentifierinthetestsuitestructure(testgroup/subgroupidentifier)TPIdentifierofthetestpurposeReferenceITU-TRecommendationQ.1600ThereferencetotherequirementintheISUPINAPinteractionstandard,whichledtothetestpurpose.SelectionexpressionSelectioncriterionforthetestpurposetakingintoaccounttheexchange'sroleandtheanswerstothespecifiedPICSquestions(seeannexA/Q.isin_test).Ifthereisnoselectionexpressionspecified,theTPisvalidforallrolesofexchanges.ConfigurationThisisareferencetothetestconfigurationused.Thenextrowdefinesthetestpurposeitself,eachhavingatitleinitalicsandatextbody.TheISUPmessages,parameters,theINAPoperationsandinformationelementsarehighlightedboldtoeasethereadability.Inordertocheckthespecifiedbehaviourforsometestpurposes,aspecialprerequisitetestconditionhastobefulfilled.Ifsuchaconditionisneeded,itispresentedafterthetestpurposeundertheheading'Pre-testconditions'.6.3.1INAPbasiccall6.3.1.1InitialDetectionPointTSS/INBC/IDPTPISN_V_1_1_1ReferenceITU-TRecommendationQ.16009.1.1.1asendorsedby[1];table4/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingofthecalledpartynumberToverifythattheIUTcansuccessfullymapthecalledpartynumberfromtheIAMtothecalledPartyNumberoftheInitialDPoperation.Pre-testconditions:ArmDP3(Analyzed_Information)SIST EN 301 070-3 V1.1.2:2005

ETSIETSIEN301070-3V1.1.2(2000-11)14TSS/INBC/IDPTPISN_V_1_1_2ReferenceITU-TRecommendationQ.16009.1.1.1asendorsedby[1];table4/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingofthecallingpartynumberToverifythattheIUTcansuccessfullymapthecallingpartynumberfromtheIAMtothecallingPartyNumberoftheInitialDPoperation.Pre-testconditions:NoneTSS/INBC/IDPTPISN_V_1_1_3ReferenceITU-TRecommendationQ.16009.1.1.1asendorsedby[1];table4/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingofthecallingpartysub-addressToverifythattheIUTcansuccessfullymapthecallingpartynumberandthecallingpartysub-addresscontainedintheaccesstransportparameterfromtheIAMtothecallingPartyNumberandcallingPartySubaddressoftheInitialDPoperation.Pre-testconditions:NoneTSS/INBC/IDPTPISN_V_1_1_4ReferenceITU-TRecommendationQ.16009.1.1.1asendorsedby[1];table4/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingoftheadditionalcallingpartynumberinthegenericnumberToverifythattheIUTcansuccessfullymaptheadditionalcallingpartynumberinthegenericnumberfromtheIAMtotheadditionalCallingPartyNumberoftheInitialDPoperation.Pre-testconditions:NoneTSS/INBC/IDPTPISN_V_1_1_5ReferenceITU-TRecommendationQ.16009.1.1.1asendorsedby[1];table4/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingofthecallingparty'scategoryToverifythattheIUTcansuccessfullymapthecallingparty'scategoryfromtheIAMtothecallingPartysCategoryoftheInitialDPoperation.Pre-testconditions:NoneSIST EN 301 070-3 V1.1.2:2005

ETSIETSIEN301070-3V1.1.2(2000-11)15TSS/INBC/IDPTPISN_V_1_1_6ReferenceITU-TRecommendationQ.16009.1.1.1asendorsedby[1];table4/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingoftheforwardcallindicatorsToverifythattheIUTcansuccessfullymaptheforwardcallindicatorsfromtheIAMtotheforwardCallIndicatorsoftheInitialDPoperation.Pre-testconditions:NoneTSS/INBC/IDPTPISN_V_1_1_7ReferenceITU-TRecommendationQ.16009.1.1.1asendorsedby[1];table4/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingofthelocationnumberToverifythattheIUTcansuccessfullymapthelocationnumberfromtheIAMtothelocationNumberoftheInitialDPoperation.Pre-testconditions:NoneTSS/INBC/IDPTPISN_V_1_1_8ReferenceITU-TRecommendationQ.16009.1.1.1asendorsedby[1];table4/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingoftheoriginalcallednumberToverifythattheIUTcansuccessfullymaptheoriginalcallednumberfromtheIAMtotheoriginalCalledPartyIdoftheInitialDPoperation.Pre-testconditions:NoneTSS/INBC/IDPTPISN_V_1_1_9ReferenceITU-TRecommendationQ.16009.1.1.1asendorsedby[1];table4/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingoftheredirectingnumberToverifythattheIUTcansuccessfullymaptheredirectingnumberfromtheIAMtotheredirectingPartyIdoftheInitialDPoperation.Pre-testconditions:NoneSIST EN 301 070-3 V1.1.2:2005

ETSIETSIEN301070-3V1.1.2(2000-11)16TSS/INBC/IDPTPISN_V_1_1_10ReferenceITU-TRecommendationQ.16009.1.1.1asendorsedby[1];table4/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingoftheredirectioninformationToverifythattheIUTcansuccessfullymaptheredirectioninformationfromtheIAMtotheredirectionInformationoftheInitialDPoperation.Pre-testconditions:NoneTSS/INBC/IDPTPISN_V_1_1_11ReferenceITU-TRecommendationQ.16009.1.1.1asendorsedby[1];table4/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingoftheuserteleserviceinformationToverifythattheIUTcansuccessfullymaptheuserteleserviceinformationfromtheIAMtothehighLayerCompatibilityoftheInitialDPoperation.Theuserteleserviceinformationcontainsthefirstpriorityhighlayercompatibilityinformationelement.Pre-testconditions:NoneTSS/INBC/IDPTPISN_V_1_1_12ReferenceITU-TRecommendationQ.16009.1.1.1asendorsedby[1];table4/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingofthepreferredhighlayercompatibilityfromtheaccesstransportparameterToverifythattheIUTcansuccessfullymapthehighlayercompatibilityinformationelementscontainedintheaccesstransportparameterfromtheIAMtothehighLayerCompatibilityoftheInitialDPoperation.TheuserteleserviceinformationparameterisnotcontainedintheIAM.Pre-testconditions:NoneTSS/INBC/IDPTPISN_V_1_1_13ReferenceITU-TRecommendationQ.16009.1.1.1asendorsedby[1];table4/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingoftheuserserviceinformationprimeToverifythattheIUTcansuccessfullymaptheuserserviceinformationprimefromtheIAMtothebearerCapabilityoftheInitialDPoperation.Thisisthefirstprioritybearercapability,thesecondonebeingcontainedintheuserserviceinformationoftheIAM.Pre-testconditions:NoneSIST EN 301 070-3 V1.1.2:2005

ETSIETSIEN301070-3V1.1.2(2000-11)17TSS/INBC/IDPTPISN_V_1_1_14ReferenceITU-TRecommendationQ.16009.1.1.1asendorsedby[1];table4/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingoftheuserserviceinformationToverifythattheIUTcansuccessfullymaptheuserserviceinformationfromtheIAMtothebearerCapabilityoftheInitialDPoperation.TheuserserviceinformationprimeparameterisnotcontainedintheIAM.Pre-testconditions:None6.3.1.2ConnectOperationTSS/INBC/CONTPISN_V_1_2_1ReferenceITU-TRecommendationQ.16009.1.1.1.1asendorsedby[1];table5/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingofthedestinationRoutingAddressToverifythattheIUTcansuccessfullymapthedestinationRoutingAddressoftheConnectoperationtothecalledpartynumberoftheIAM.Pre-testconditions:NoneTSS/INBC/CONTPISN_V_1_2_2ReferenceITU-TRecommendationQ.16009.1.1.1.1asendorsedby[1];note2table5/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingofonedestinationRoutingAddressoutofthreeToverifythattheIUTcansuccessfullymaponeofthreedestinationRoutingAddressinformationelementsoftheConnectoperationtothecalledpartynumberoftheIAM.Pre-testconditions:NoneTSS/INBC/CONTPISN_V_1_2_3ReferenceITU-TRecommendationQ.16009.1.1.1.1asendorsedby[1];note3table5/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingofthedestinationRoutingAddresswithcutAndPasteToverifythattheIUTcansuccessfullymapthedestinationRoutingAddresswiththecutAndPasteinformationelementoftheConnectoperationtothecalledpartynumberoftheIAMconformtosubclause3.3.16ofITU-TRecommendationQ.1218[7].Pre-testconditions:NoneSIST EN 301 070-3 V1.1.2:2005

ETSIETSIEN301070-3V1.1.2(2000-11)18TSS/INBC/CONTPISN_V_1_2_4ReferenceITU-TRecommendationQ.16009.1.1.1.1asendorsedby[1];note3table5/Q.1600asendorsedby[1]SelectionexpressionNOTPICSA.4/7Configuration1TestpurposeMappingofthedestinationRoutingAddresswithoutcutAndPasteToverifythat,ifthereisnocutAndPasteinformationelementintheConnectoperation,theIUTsendsanACMmessageinthebackwarddirectionwiththebackwardcallindicatorscodedasfollows:calledparty'sstatusindicator00(noindication)calledparty'scategory00(noindication)end-to-endmethodindicator00(noend-to-endmethodavailable)interworkingindicator0(nointerworkingencountered)end-to-endinformationindicator0(noend-to-endinformationavailable)ISDNUserPartindicator1(ISDNUserPartusedalltheway)ISDNaccessindicator1(terminatingaccessISDN)SCCPmethodindicator00(noindication)Pre-testconditions:NoneTSS/INBC/IDPTPISN_V_1_2_5ReferenceITU-TRecommendationQ.16009.1.1.1.1asendorsedby[1];table5/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingofthecallingPartysCategoryToverifythattheIUTcansuccessfullymapthecallingPartysCategoryoftheConnectoperationtothecallingparty'scategoryintheoutgoingIAM.Pre-testconditions:NoneTSS/INBC/CONTPISN_V_1_2_6ReferenceITU-TRecommendationQ.16009.1.1.1.3asendorsedby[1];table6/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingoftheserviceInteractionIndicators-Calltobedivertedindicator(allowed)ToverifythattheIUTdoesnotmaptheserviceInteractionIndicatorswiththecalltobedivertedindicatorsetto‘calldiversionallowed’oftheConnectoperationtothecalldiversiontreatmentindicatorsparameteroftheIAM,becausethecodinginthiscaseis‘noindication’.Pre-testconditions:NoneSIST EN 301 070-3 V1.1.2:2005

ETSIETSIEN301070-3V1.1.2(2000-11)19TSS/INBC/CONTPISN_V_1_2_7ReferenceITU-TRecommendationQ.16009.1.1.1.3asendorsedby[1];table6/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingoftheserviceInteractionIndicators-Calltobedivertedindicator(notallowed)ToverifythattheIUTcansuccessfullymaptheserviceInteractionIndicatorswiththecalltobedivertedindicatorsetto‘calldiversionnotallowed’oftheConnectoperationtothecalldiversiontreatmentindicatorsparameteroftheIAMwiththecalltobedivertedindicatorsetto‘calldiversionnotallowed’.Pre-testconditions:NoneTSS/INBC/CONTPISN_V_1_2_8ReferenceITU-TRecommendationQ.16009.1.1.1.3asendorsedby[1];table6/Q.1600asendorsedby[1]SelectionexpressionConfiguration1(double)TestpurposeMappingoftheserviceInteractionIndicators-Calltobeofferedindicator(notallowed)ToverifythattheIUTdoesnotmaptheserviceInteractionIndicatorswiththecalltobeofferedindicatorsetto‘callofferingnotallowed(default)’oftheConnectoperationtothecallofferingtreatmentindicatorsparameteroftheIAM,becausethecodinginthiscaseis‘noindication’Pre-testconditions:NoneTSS/INBC/CONTPISN_V_1_2_9ReferenceITU-TRecommendationQ.16009.1.1.1.3asendorsedby[1];table6/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingoftheserviceInteractionIndicators-Calltobeofferedindicator(allowed)ToverifythattheIUTcansuccessfullymaptheserviceInteractionIndicatorswiththecalltobeofferedindicatorsetto'callofferingallowed'oftheConnectoperationtothecallofferingtreatmentindicatorsparameteroftheIAMwiththecalltobeofferedindicatorsetto'callofferingallowed'.Pre-testconditions:NoneTSS/INBC/CONTPISN_V_1_2_10ReferenceITU-TRecommendationQ.16009.1.1.1.3asendorsedby[1];table6/Q.1600asendorsedby[1]SelectionexpressionConfiguration1(double)TestpurposeMappingoftheserviceInteractionIndicators-ConferenceatDLEacceptanceindicator(accept)ToverifythattheIUTdoesnotmaptheserviceInteractionIndicatorswiththeConferenceatDLEacceptanceindicatorsetto‘acceptconferencerequest(default)’oftheConnectoperationtotheconferencetreatmentindicatorsparameteroftheIAM,becausethecodinginthiscaseis‘noindication’Pre-testconditions:NoneSIST EN 301 070-3 V1.1.2:2005

ETSIETSIEN301070-3V1.1.2(2000-11)20TSS/INBC/CONTPISN_V_1_2_11ReferenceITU-TRecommendationQ.16009.1.1.1.3asendorsedby[1];table6/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingoftheserviceInteractionIndicators-ConferenceatDLEacceptanceindicator(reject)ToverifythattheIUTcansuccessfullymaptheserviceInteractionIndicatorswiththeConferenceatDLEacceptanceindicatorsetto'rejectconferencerequest'oftheConnectoperationtotheconferencetreatmentindicatorsparameteroftheIAMintheforwarddirectionwiththeconferenceacceptanceindicatorsetto'rejectconferencerequest'.Pre-testconditions:NoneTSS/INBC/CONTPISN_V_1_2_12ReferenceITU-TRecommendationQ.16009.1.1.1.3asendorsedby[1];9.1.1.3table6/Q.1600asendorsedby[1]SelectionexpressionPICSA.4/7Configuration1(double)TestpurposeMappingoftheserviceInteractionIndicators-ConferenceatOLEacceptanceindicator(accept)ToverifythattheIUTcansuccessfullymaptheserviceInteractionIndicatorswiththeConferenceatOLEacceptanceindicatorsetto'acceptconferencerequest(default)'oftheConnectoperationtotheconferencetreatmentindicatorsparameteroftheACM/CON,,becausethecodinginthiscaseis‘noindication’.ThesendingoftheACM/CONinthebackwarddirectionispostponeduntiltheACMorCONisreceived.Pre-testconditions:NoneTSS/INBC/CONTPISN_V_1_2_13ReferenceITU-TRecommendationQ.16009.1.1.1.3asendorsedby[1];9.1.1.3table6/Q.1600asendorsedby[1]SelectionexpressionNOTPICSA.4/7Configuration1(double)TestpurposeMappingoftheserviceInteractionIndicators-ConferenceatOLEacceptanceindicator(accept)ToverifythattheIUTcansuccessfullymaptheserviceInteractionIndicatorswiththeConferenceatOLEacceptanceindicatorsetto'acceptconferencerequest(default)'oftheConnectoperationtotheconferencetreatmentindicatorsparameteroftheCPG/ANMinthebackwarddirectionwiththeconferenceacceptanceindicatorsetto'noindication'or'acceptconferencerequest'.AnACMhasalreadybeensentinthebackwarddirection,sothereceivedACMorCONismappedtoCPGorANMrespectively.ToverifythattheIUTdoesnotmaptheserviceInteractionIndicatorswiththeConferenceatOLEacceptanceindicatorsetto‘acceptconferencerequest(default)’oftheConnectoperationtotheconferencetreatmentindicatorsparameteroftheCPG/ANM,becausethecodinginthiscaseis‘noindication’.AnACMhasalreadybeensentinthebackwarddirection,sothereceivedACMorCONismappedtoCPGorANMrespectively.Pre-testconditions:NoneSIST EN 301 070-3 V1.1.2:2005

ETSIETSIEN301070-3V1.1.2(2000-11)21TSS/INBC/CONTPISN_V_1_2_14ReferenceITU-TRecommendationQ.16009.1.1.1.3asendorsedby[1];9.1.1.3table6/Q.1600asendorsedby[1]SelectionexpressionNotPICSA.4/7Configuration1TestpurposeMappingoftheserviceInteractionIndicators-ConferenceatOLEacceptanceindicator(reject)TestpurposeToverifythattheIUTcansuccessfullymaptheserviceInteractionIndicatorswiththeConferenceatOLEacceptanceindicatorsetto'rejectconferencerequest'oftheConnectoperationtotheconferencetreatmentindicatorsparameteroftheACM/CONinthebackwarddirectionwiththeconferenceacceptanceindicatorsetto'rejectconferencerequest'.ThesendingoftheACM/CONinthebackwarddirectionispostponeduntiltheACMorCONisreceived.Pre-testconditions:NoneTSS/INBC/CONTPISN_V_1_2_15ReferenceITU-TRecommendationQ.16009.1.1.1.3asendorsedby[1];9.1.1.3table6/Q.1600asendorsedby[1]SelectionexpressionNOTPICSA.4/7Configuration1TestpurposeMappingoftheserviceInteractionIndicators-ConferenceatOLEacceptanceindicator(reject)ToverifythattheIUTcansuccessfullymaptheserviceInteractionIndicatorswiththeConferenceatOLEacceptanceindicatorsetto'rejectconferencerequest'oftheConnectoperationtotheconferencetreatmentindicatorsparameteroftheCPG/ANMinthebackwarddirectionwiththeconferenceacceptanceindicatorsetto'rejectconferencerequest'.AnACMhasalreadybeensentinthebackwarddirection,sothereceivedACMorCONismappedtoCPGorANMrespectively.Pre-testconditions:NoneTSS/INBC/CONTPISN_V_1_2_16ReferenceITU-TRecommendationQ.16009.1.1.1.1asendorsedby[1];table5/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingoftheoriginalCalledNumberToverifythattheIUTcansuccessfullymaptheoriginalCalledPartyIdoftheConnectoperationtotheoriginalcallednumberintheIAMmessage.Pre-testconditions:NoneTSS/INBC/CONTPISN_V_1_2_17ReferenceITU-TRecommendationQ.16009.1.1.1.1asendorsedby[1];table5/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingoftheredirectingPartyIDToverifythattheIUTcansuccessfullymaptheredirectingPartyIdoftheConnectoperationtotheredirectingnumberintheIAMmessage.Pre-testconditions:NoneSIST EN 301 070-3 V1.1.2:2005

ETSIETSIEN301070-3V1.1.2(2000-11)22TSS/INBC/CONTPISN_V_1_2_18ReferenceITU-TRecommendationQ.16009.1.1.1.1asendorsedby[1];table5/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeMappingoftheredirectionInformationToverifythattheIUTcansuccessfullymaptheredirectionInformationoftheConnectoperationtotheredirectioninformationintheIAMmessage.Pre-testconditions:NoneTSS/INBC/CONTPISN_V_1_2_19ReferenceITU-TRecommendationQ.16009.1.1.1.1asendorsedby[1];note5table5/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeNomappingoftheisdnAccessRelatedInformationToverifythattheIUTdoesnotmaptheisdnAccessRelatedInformationoftheConnectoperation,sothatthereceivedinformationintheaccesstransportparameteroftheIAM(calledpartysub-address,lowlayercompatibilityandhighlayercompatibility)ispassedonunchangedintheforwarddirectionintheoutgoingIAMmessage.Pre-testconditions:None6.3.1.3OtherINAPbasiccallrelatedissuesTSS/INBC/OINTPISN_V_1_3_1ReferenceITU-TRecommendationQ.16009.1.1.6/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeContinuitycheckToverifythattheIUTdoesnotstartINAPoperationsuntiltheCOTmessageindicatingasuccessfulcontinuitycheckisreceived.TheIAMcontainstheindication'continuitycheckperformedonapreviouscircuit'inthenatureofconnectionindicators.Pre-testconditions:NoneTSS/INBC/OINTPISN_V_1_3_2ReferenceITU-TRecommendationQ.16009.1.1.7/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeSegmentationToverifythattheIUTdoesnotstartINAPoperationsuntiltheSGMisreceived.TheIAMcontainsasimplesegmentationindicatorsetto'additionalinformationwillbesentinasegmentationmessage'intheoptionalforwardcallindicators.Pre-testconditions:NoneSIST EN 301 070-3 V1.1.2:2005

ETSIETSIEN301070-3V1.1.2(2000-11)23TSS/INBC/OINTPISN_V_1_3_3ReferenceITU-TRecommendationQ.16009.1.4/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeReleaseCalloperationwithreleaseCallArgToverifythattheIUTreleasesthecallinbothdirectionsuponreceiptofaReleaseCalloperationfromtheSCPwiththecausevalueinthecauseindicatorssettothereceivedreleaseCallArgvalue.Pre-testconditions:NoneTSS/INBC/OINTPISN_V_1_3_4ReferenceITU-TRecommendationQ.16009.1.4/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeReleaseCalloperationwithoutreleaseCallArgToverifythattheIUTreleasesthecallinbothdirectionsuponreceiptofaReleaseCalloperationwithoutreleaseCallArgfromtheSCPwiththecausevalueinthecauseindicatorssetto'#31-normalunspecified'.Pre-testconditions:NoneTSS/INBC/OINTPISN_V_1_3_5ReferenceITU-TRecommendationQ.16009.1.5/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeTransferofcalledINnumberToverifythattheIUTsendsthecalledpartynumberfromthereceivedIAMinthecalledINnumberoftheoutgoingIAM.TheaddresspresentationrestrictedindicatorofthecalledINnumberwillbesetaccordingtothecalledINnumberpresentationrestrictedindicatorintheserviceInteractionIndicatorsofthereceivedConnectoperation.Pre-testconditions:NoneTSS/INBC/OINTPISN_V_1_3_6ReferenceITU-TRecommendationQ.16009.1.5/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeTransferofcalledINnumberToverifythattheIUToverwritesintheoutgoingIAMthecalledINnumberfromthereceivedIAMwiththecalledpartynumberofthereceivedIAM.TheaddresspresentationrestrictedindicatorofthecalledINnumberwillbesetaccordingtothecalledINnumberpresentationrestrictedindicatorintheserviceInteractionIndicatorsofthereceivedConnectoperation.Pre-testconditions:NoneSIST EN 301 070-3 V1.1.2:2005

ETSIETSIEN301070-3V1.1.2(2000-11)246.3.2INcallwithSCPrequesttocollectfurtherdigitsTSS/INCDTPISN_V_2_1ReferenceITU-TRecommendationQ.16009.2/Q.1600asendorsedby[1]SelectionexpressionPICSA1/5Configuration1TestpurposeEventReportBCSMoperationToverifythattheIUTcanreplytoaRequestReportBCSMEventoperationtoarmDP2andaCollectInformationoperationfromtheSCPwithanEventReportBCSMoperation.ThecalledINnumberoftheoutgoingIAMshallcontaintheaddresssignaldigitsreceivedintheIAMandinthesubsequentnumberoftheSAMmessage.Pre-testconditions:NoneTSS/INCDTPISN_V_2_2ReferenceITU-TRecommendationQ.16009.2/Q.1600asendorsedby[1]SelectionexpressionPICSA1/6Configuration1TestpurposeCollectedInformationoperationToverifythattheIUTcanreplytoaRequestReportBCSMEventoperationtoarmDP2andaCollectInformationoperationwithanCollectedInformationoperation.ThecalledINnumberoftheoutgoingIAMshallcontaintheaddresssignaldigitsreceivedinthecalledpartynumberoftheIAMandinthesubsequentnumberoftheSAMmessage.Pre-testconditions:None6.3.3DetectionPointProcessingTSS/DPPTPISN_V_3_1ReferenceITU-TRecommendationQ.16009.3.1.1/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeExpiryoftimerTNoReplyToverifythattheIUTcaninformtheSCPoftheexpiryofthetimerTNoReplywithaEventReportBCSMoperationiftheSCPhasrequestedwithinaRequestReportBCSMEventoperationthearmingofDP6orDP14specifyingnotifyAndContinue.Pre-testconditions:NoneSIST EN 301 070-3 V1.1.2:2005

ETSIETSIEN301070-3V1.1.2(2000-11)25TSS/DPPTPISN_V_3_2ReferenceITU-TRecommendationQ.16009.3.2.2/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeFallbackToverifythattheIUTcanperformfallbackifanIAMwithatransmissionmediumrequirementsetto'64kbit/sunrestrictedpreferred'isreceived.Pre-testconditions:NoneTSS/DPPTPISN_V_3_3ReferenceITU-TRecommendationQ.16009.3.2.3.1.1/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeUser-to-usersignalling,service1implicitToverifythattheIUTdiscardstheuser-to-userinformationreceivedintheIAMandsignalsintheuser-to-userindicatorsoftheACM'user-to-userinformationdiscardedbythenetwork'.TheoutgoingIAMwillnotcontainauser-to-userinformationparameter.Pre-testconditions:NoneTSS/DPPTPISN_V_3_4ReferenceITU-TRecommendationQ.16009.3.2.3.1.1/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeUser-to-usersignalling,service1explicitnon-essentialToverifythattheIUTdiscardsfromthereceivedIAMhavingtheuser-to-userindicatorswiththeService1fieldsetto‘request,non-essential’andsignalsintheService1fieldoftheuser-to-userindicatorsoftheACM‘notprovided’.TheoutgoingIAMwillnotcontainauser-to-userindicator/user-to-userinformationparameter.Pre-testconditions:NoneTSS/DPPTPISN_V_3_5ReferenceITU-TRecommendationQ.16009.3.2.3.1.1/Q.1600asendorsedby[1]SelectionexpressionConfiguration1TestpurposeUser-to-usersignalling,service1explicitess
...