SIST ISO/IEC 9995-2:2010/A1:2020

Information technology — Keyboard layouts for text and office systems — Part 2: Alphanumeric section AMENDMENT 1: Numeric keypad emulation

Within the general scope described in ISO/IEC 9995-1, this part of ISO/IEC 9995 specifies the alphanumeric section of a keyboard and the division of that section into zones; the arrangement, number, and location of the keys in the alphanumeric zone ZA0 of the alphanumeric section; and the layout and allocation of several control functions to the keys in the function zones of the alphanumeric section.

Technologies de l'information — Disposition des claviers conçus pour la bureautique — Partie 2: Module alphanumérique AMENDEMENT 1: Émulation du pavé numérique

Informacijska tehnologija - Razpored tipk na tipkovnici za potrebe pisanja besedil in pisarniških sistemov - 2. del: Alfanumerični del - Dopolnilo 1: Emulacija številske tipkovnice

V okviru splošnega področja uporabe, opisanega v ISO/IEC 9995-1, ta del ISO/IEC 9995 določa alfanumerični del tipkovnice in delitev tega dela na področja; postavitev, število in lokacija tipk na alfanumeričnem področju ZAO alfanumeričnega dela; ter postavitev in dodelitev več nadzornih funkcij za tipke v funkcijskih področjih alfanumeričnega dela.

General Information

• Status: Published
• Public Enquiry End Date: 17-Nov-2019
• Publication Date: 08-Dec-2019
• ICS: 35.180 - IT Terminal and other peripheral equipment
• Technical Committee: ITC - Information technology
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 18-Nov-2019
• Due Date: 23-Jan-2020
• Completion Date: 09-Dec-2019
• Ref Project: ISO/IEC 9995-2:2009/Amd 1:2012 - Information technology — Keyboard layouts for text and office systems — Part 2: Alphanumeric section — Amendment 1: Numeric keypad emulation

Relations

• Amends: SIST ISO/IEC 9995-2:2010 - Information technology - Keyboard layouts for text and office systems - Part 2: Alphanumeric section
• Effective Date: 01-Jan-2020
• Child: SIST ISO/IEC 9995-2:2010 - Information technology - Keyboard layouts for text and office systems - Part 2: Alphanumeric section
• Effective Date: 02-Jul-2016

Standards Content (Sample)

INTERNATIONAL ISO/IEC
STANDARD 9995-2
Third edition
2009-10-15
AMENDMENT 1
2012-12-01


Information technology — Keyboard
layouts for text and office systems —
Part 2:
Alphanumeric section
AMENDMENT 1: Numeric keypad emulation
Technologies de l'information — Disposition des claviers conçus pour la
bureautique —
Partie 2: Module alphanumérique
AMENDEMENT 1: Émulation du pavé numérique




Reference number
ISO/IEC 9995-2:2009/Amd.1:2012(E)
©
ISO/IEC 2012

---------------------- Page: 1 ----------------------
ISO/IEC 9995-2:2009/Amd.1:2012(E)

COPYRIGHT PROTECTED DOCUMENT


©  ISO/IEC 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

ii © ISO/IEC 2012 – All rights reserved

---------------------- Page: 2 ----------------------
ISO/IEC 9995-2:2009/Amd.1:2012(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are members of
ISO or IEC participate in the development of International Standards through technical committees
established by the respective organization to deal with particular fields of technical activity. ISO and IEC
technical committees collaborate in fields of mutual interest. Other international organizations, governmental
and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information
technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of the joint technical committee is to prepare International Standards. Draft International
Standards adopted by the joint technical committee are circulated to national bodies for voting. Publication as
an International Standard requires approval by at least 75 % of the national bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO a
...

NORME ISO/CEI
INTERNATIONALE 9995-2
Troisième édition
2009-10-15
AMENDEMENT 1
2012-12-01



Technologies de l'information —
Disposition des claviers conçus pour la
bureautique —
Partie 2:
Module alphanumérique
AMENDEMENT 1: Émulation du pavé
numérique
Information technology — Keyboard layouts for text and office
systems —
Part 2: Alphanumeric section
AMENDMENT 1: Numeric keypad emulation




Numéro de référence
ISO/CEI 9995-2:2009/Amd.1:2012(F)
©
ISO/CEI 2012

---------------------- Page: 1 ----------------------
ISO/CEI 9995-2:2009/Amd.1:2012(F)

DOCUMENT PROTÉGÉ PAR COPYRIGHT


©  ISO/CEI 2012
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit
de l'ISO à l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Publié en Suisse

ii © ISO/CEI 2012 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO/CEI 9995-2:2009/Amd.1:2012(F)
Avant-propos
L'ISO (Organisation internationale de normalisation) et la CEI (Commission électrotechnique internationale)
forment le système spécialisé de la normalisation mondiale. Les organismes nationaux membres de l'ISO ou
de la CEI participent au développement de Normes internationales par l'intermédiaire des comités techniques
créés par l'organisation concernée afin de s'occuper des domaines particuliers de l'activité technique. Les
comités techniques de l'ISO et de la CEI collaborent dans des domaines d'intérêt commun. D'autres
organisations internationales, gouvernementales et non gouvernementales, en liaison avec l'ISO et la CEI
participent également aux travaux. Dans le domaine des technologies de l'information, l'ISO et la CEI ont créé
un comité technique mixte, l'ISO/CEI JTC 1.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI,
Partie 2.
La tâche principale du comité technique mixte est d'élaborer les Normes internationales. Les projets de
Normes internationales adoptés par le comité technique mixte sont soumis aux organismes nationaux pour
vote. Leur publication comme Normes internationales requiert l'approbation de 75 % au moins des
organismes nationaux votants.
L'attention est appelée sur le fait que certains des éléments du présent document peuvent faire l'objet de
droits de propriété intellectuelle ou de droits analogues. L'ISO et la CEI ne sauraient être tenues pour
responsables de ne pas avoir identifié
...

SLOVENSKI STANDARD
SIST ISO/IEC 9995-2:2010/A1:2020
01-januar-2020
Informacijska tehnologija - Razpored tipk na tipkovnici za potrebe pisanja besedil
in pisarniških sistemov - 2. del: Alfanumerični del - Dopolnilo 1: Emulacija
številske tipkovnice
Information technology — Keyboard layouts for text and office systems — Part 2:
Alphanumeric section
AMENDMENT 1: Numeric keypad emulation
Technologies de l'information — Disposition des claviers conçus pour la bureautique —
Partie 2: Module alphanumérique
AMENDEMENT 1: Émulation du pavé numérique
Ta slovenski standard je istoveten z: ISO/IEC 9995-2:2009/Amd 1:2012
ICS:
35.180 Terminalska in druga IT Terminal and other
periferna oprema IT peripheral equipment
SIST ISO/IEC 9995-2:2010/A1:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST ISO/IEC 9995-2:2010/A1:2020

---------------------- Page: 2 ----------------------
SIST ISO/IEC 9995-2:2010/A1:2020

INTERNATIONAL ISO/IEC
STANDARD 9995-2
Third edition
2009-10-15
AMENDMENT 1
2012-12-01


Information technology — Keyboard
layouts for text and office systems —
Part 2:
Alphanumeric section
AMENDMENT 1: Numeric keypad emulation
Technologies de l'information — Disposition des claviers conçus pour la
bureautique —
Partie 2: Module alphanumérique
AMENDEMENT 1: Émulation du pavé numérique




Reference number
ISO/IEC 9995-2:2009/Amd.1:2012(E)
©
ISO/IEC 2012

---------------------- Page: 3 ----------------------
SIST ISO/IEC 9995-2:2010/A1:2020
ISO/IEC 9995-2:2009/Amd.1:2012(E)

COPYRIGHT PROTECTED DOCUMENT


©  ISO/IEC 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

ii © ISO/IEC 2012 – All rights reserved

---------------------- Page: 4 ----------------------
SIST ISO/IEC 9995-2:2010/A1:2020
ISO/IEC 9995-2:2009/Amd.1:2012(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are members of
ISO or IEC participate in the development of International Standards through technical committees
established by the respective organization to deal with particular fields of technical activity. ISO and IEC
technical committees collaborate in fields of mutual interest. Other international organizations, governmental
and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information
technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.
Int
...

SLOVENSKI STANDARD
SIST ISO/IEC 9995-2:2010/oAmd 1:2019
01-september-2019
Informacijska tehnologija - Razpored tipk na tipkovnici za potrebe pisanja besedil
in pisarniških sistemov - 2. del: Alfanumerični del - Dopolnilo 1: Emulacija
številske tipkovnice
Information technology — Keyboard layouts for text and office systems — Part 2:
Alphanumeric section
AMENDMENT 1: Numeric keypad emulation
Technologies de l'information — Disposition des claviers conçus pour la bureautique —
Partie 2: Module alphanumérique
AMENDEMENT 1: Émulation du pavé numérique
Ta slovenski standard je istoveten z: ISO/IEC 9995-2:2009/Amd 1:2012
ICS:
35.180 Terminalska in druga IT Terminal and other
periferna oprema IT peripheral equipment
SIST ISO/IEC 9995-2:2010/oAmd 1:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO/IEC 9995-2:2010/oAmd 1:2019

---------------------- Page: 2 ----------------------

SIST ISO/IEC 9995-2:2010/oAmd 1:2019

INTERNATIONAL ISO/IEC
STANDARD 9995-2
Third edition
2009-10-15
AMENDMENT 1
2012-12-01


Information technology — Keyboard
layouts for text and office systems —
Part 2:
Alphanumeric section
AMENDMENT 1: Numeric keypad emulation
Technologies de l'information — Disposition des claviers conçus pour la
bureautique —
Partie 2: Module alphanumérique
AMENDEMENT 1: Émulation du pavé numérique




Reference number
ISO/IEC 9995-2:2009/Amd.1:2012(E)
©
ISO/IEC 2012

---------------------- Page: 3 ----------------------

SIST ISO/IEC 9995-2:2010/oAmd 1:2019
ISO/IEC 9995-2:2009/Amd.1:2012(E)

COPYRIGHT PROTECTED DOCUMENT


©  ISO/IEC 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

ii © ISO/IEC 2012 – All rights reserved

---------------------- Page: 4 ----------------------

SIST ISO/IEC 9995-2:2010/oAmd 1:2019
ISO/IEC 9995-2:2009/Amd.1:2012(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are members of
ISO or IEC participate in the development of International Standards through technical committees
established by the respective organization to deal with particular fields of technical activity. ISO and IEC
technical committees collaborate in fields of mutual interest. Other international organizations, governmental
and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information
technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.
...

SLOVENSKI STANDARD
SIST ISO/IEC 9995-2:2010/oA1:2019
01-november-2019
Informacijska tehnologija - Razpored tipk na tipkovnici za potrebe pisanja besedil
in pisarniških sistemov - 2. del: Alfanumerični del - Dopolnilo 1: Emulacija
številske tipkovnice
Information technology — Keyboard layouts for text and office systems — Part 2:
Alphanumeric section
AMENDMENT 1: Numeric keypad emulation
Technologies de l'information — Disposition des claviers conçus pour la bureautique —
Partie 2: Module alphanumérique
AMENDEMENT 1: Émulation du pavé numérique
Ta slovenski standard je istoveten z: ISO/IEC 9995-2:2009/Amd 1:2012
ICS:
35.180 Terminalska in druga IT Terminal and other
periferna oprema IT peripheral equipment
SIST ISO/IEC 9995-2:2010/oA1:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST ISO/IEC 9995-2:2010/oA1:2019

---------------------- Page: 2 ----------------------
SIST ISO/IEC 9995-2:2010/oA1:2019

INTERNATIONAL ISO/IEC
STANDARD 9995-2
Third edition
2009-10-15
AMENDMENT 1
2012-12-01


Information technology — Keyboard
layouts for text and office systems —
Part 2:
Alphanumeric section
AMENDMENT 1: Numeric keypad emulation
Technologies de l'information — Disposition des claviers conçus pour la
bureautique —
Partie 2: Module alphanumérique
AMENDEMENT 1: Émulation du pavé numérique




Reference number
ISO/IEC 9995-2:2009/Amd.1:2012(E)
©
ISO/IEC 2012

---------------------- Page: 3 ----------------------
SIST ISO/IEC 9995-2:2010/oA1:2019
ISO/IEC 9995-2:2009/Amd.1:2012(E)

COPYRIGHT PROTECTED DOCUMENT


©  ISO/IEC 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

ii © ISO/IEC 2012 – All rights reserved

---------------------- Page: 4 ----------------------
SIST ISO/IEC 9995-2:2010/oA1:2019
ISO/IEC 9995-2:2009/Amd.1:2012(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are members of
ISO or IEC participate in the development of International Standards through technical committees
established by the respective organization to deal with particular fields of technical activity. ISO and IEC
technical committees collaborate in fields of mutual interest. Other international organizations, governmental
and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information
technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC 1.
I
...