Information technology -- Keyboard layouts for text and office systems -- Part 3: Complementary layouts of the alphanumeric zone of the alphanumeric section

Defines the allocation on a keyboard of a set of graphic characters which, when used in combination with an existing national version keyboard layout or the complementary Latin group layout allows the input of the full graphic character repertoire. Primarily intended for word-processing and text-processing applications.

Technologies de l'information -- Disposition des claviers conçus pour la bureautique -- Partie 3: Dispositions complémentaires de la zone alphanumérique du module alphanumérique

Dans le domaine d'application général de la partie 1 de l'ISO/CEI 9995, la présente partie de l'ISO/CEI 9995 décrit, à l'article 5, l'affectation sur le clavier d'un ensemble de caractères graphiques qui, lorsqu'ils sont utilisés de paire avec une disposition nationale de clavier existante ou avec une disposition complémentaire du groupe latin telle qu'elle est définie à l'article 6 de la présente partie de l'ISO/CEI 9995, permettent la saisie du répertoire complet de caractères graphiques défini dans l'ISO/CEI 6937.  NOTE 1 Le répertoire complet défini dans l'ISO/CEI 6937 permet de représenter 40 langues européennes reconnues (plus l'Afrikaans) et basées sur l'alphabet latin. La présente partie de l'ISO/CEI 9995 est principalement destinée aux applications de traitement de texte.

Information technology - Keyboard layouts for text and office systems - Part 3: Complementary layouts of the alphanumeric zone of the alphanumeric section

General Information

Status
Withdrawn
Publication Date
31-May-1995
Withdrawal Date
04-Sep-2008
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
02-Sep-2008
Due Date
25-Sep-2008
Completion Date
05-Sep-2008

Buy Standard

Standard
ISO/IEC 9995-3:1994 - Information technology -- Keyboard layouts for text and office systems
English language
5 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO/IEC 9995-3:1995
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

INTERNATIONAL ISOfIEC
STANDARD 9995-3
First edition
1994-08-I 5
Information technology - Keyboard
layouts for text and office systems -
Part 3:
Complementary layouts of the alphanumeric
zone of the alphanumeric section
Technologies de I’informa tion - Disposition des claviers conGus pour la
bureautique -
Partie 3: Dispositions compkmentaires de la zone alphanum&ique du
module alphanum&ique

---------------------- Page: 1 ----------------------
ISO/IEC 9995-3: 1994(E)
Contents
Page
1
1 Scope .
1
2 Conformance .
1
3 Normative references .
2
4 Definitions .
2
5 Common secondary group layout .
4
6 Complementary Latin group layout .
o lSO/lEC 1994
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
l Case Postale 56 l CH-1211 Geneve 20 l Switzerland
I SO/I EC Copyright Off ice
Printed in Switzerland
II

---------------------- Page: 2 ----------------------
0 lSO/IEC
ISO/IEC 99953: 1994(E)
Foreword
IS0 (the International Organization for Standardization) and IEC (the Inter-
national Electrotechnical Commission) form the specialized system for
worldwide standardization. National bodies that are members of IS0 or
IEC participate in the development of International Standards through
technical committees established by the respective organization to deal
with particular fields of technical activity. IS0 and IEC technical com-
mittees collaborate in fields of mutual interest. Other international organ-
izations, governmental and non-governmental, in liaison with IS0 and IEC,
also take part in the work.
In the field of information technology, IS0 and IEC have established a joint
technical committee, lSO/IEC JTC 1. Draft International Standards adopted
by the joint technical committee are circulated to national bodies for vot-
ing. Publication as an International Standard requires approval by at least
75 % of the national bodies casting a vote.
International Standard lSO/lEC 9995-3 was prepared by Joint Technical
Committee lSO/IEC JTC 1, Information technology, Subcommittee SC 18,
Document processing and related communication.
This first edition supersedes all or part of
IS0 1090:1981
IS0 1091: 1977
IS0 1092:1974
IS0 1093:1981
IS0 2126:1975
IS0 2530: 1975
IS0 3243: 1975
SO 3244: 1984
SO 4169: 1979
SO 8884: 1988.
For complete detai Is, see annex A of part I of lSO/IEC 9995.
lSO/lEC 9995 consists of the following parts, under the general title In-
formation technology - Keyboard layouts for text and office systems:
- Part 7: General principles governing keyboard layouts
- Part 2: Alphanumeric section

---------------------- Page: 3 ----------------------
Q ISOJIEC
ISO/IEC 9995-3: 1994(E)
- Part 3: Complementary layouts of the alphanumeric zone of the al-
phanumeric section
- Part 4: Numeric section
- Part 5: Editing section
- Part 6: Function section
- Part 7: Symbols used to represent functions
- Part 8: Allocation of letters to the keys of a numeric keypad

---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD 0 lSO/IEC ISO/lEC 9995-3: 1994(E)
Information technology
- Keyboard layouts for text
and office systems -
Part 3:
Complementary layouts of the alphanumeric zone of the
alphanumeric section
- a national keyboard standard;
1 Scope
a national keyboard layout established by common
Within the general scope described in part 1 of --
usage in a particular country;
lSO/IEC 9995, this part of lSO/IEC 9995 defines in
clause 5 the allocation on a keyboard of a set of
- the complementary Latin group layout as defined
graphic characters which, when used in combination
in clause 6 of this part of lSO/IEC 9995.
with an existing national version keyboard layout or
the complementary Latin group layout as defined in
NOTE 2 Refer to annex A of part 2 of lSO/IEC 9995 for
clause 6 of this part of lSO/IEC 9995, allows the input
examples of allocations of graphic characters to the primary
of the full graphic character repertoire defined in
group of the alphanumeric zone of the alphanumeric sec-
lSO/IEC 6937.
tion.
The full repertoire of lSO/IEC 6937 permits the
NOTE 1
Any statement of conformance to this International
representation of 40 recognized European languages (plus
Standard shall be taken to imply that the complete
Afrikaans) using a Latin-based alphabet.
common secondary group layout (Group 2) has been
implemented, unless a subset is explicitly declared,
This part of lSO/IEC 9995 is primarily intended for
provided that all other requirements of clause 5 are
word-processing and text-processing applications.
respected.
2 Conformance
3 Normative references
The layout of a keyboard conforms to this part of The following standards contain provisions which,
lSO/IEC 9995 if the allocation of the graphic charac- through reference in this text, constitute provisions
ters of the common secondary group (group 2) is as of this part of lSO/IEC 9995. At the time of publi-
defined in clause 5 of this part of lSO/IEC 9995, and
cation, the editions indicated were valid. All standards
if the allocation of the graphic characters of the pri-
are subject to revision, and parties to agreements
mary group (group 1) conforms to one of the following
based on this part of lSO/IEC 9995 are encouraged to
layouts: investigate the possibility of applying the most recent
1

---------------------- Page: 5 ----------------------
0 lSO/lEC
ISO/IEC 9995-3: 1994(E)
editions of the standards indicated below. Members
of IEC and IS0 maintain registers of currently valid
Table 1 - Allocation of the graphic characters
International Standards.
of the common secondary group (group 2)
Level 1 Level 2
Key
lSO/l EC 646: 1991, Information technology - IS0
I I
7-bit coded character set for information interchange.
EOO Not Sign Soft Hyphen
I I
ISO/I EC 6937: 1994, Information technology - Coded
Inverted Exclamation
EOI Superscript One
graphic character set for text communication - Latin
Mark
I I
alphabet.
Vulgar Fraction One-
E02 Superscript Two
Eighth
I SO/I EC 9995-l : 1994, Information technology - Key-
I I
board layouts for text and office systems - Part I:
Pound Sign or Number
E03 Superscript Three
General principles governing keyboard layouts.
Sign
I I
ISO/I EC 10367: 1991, Information technology - Stan-
EO4 Vulgar Fraction One- Dollar Sign or Currency
dardized coded graphic character sets for use in 8-bit
Quarter Sign
I I
codes.
Vulgar Fraction Three-
E05 Vulgar Fraction One-
Half Eighths
I I
E06 Vulgar Fraction Three- Vulgar Fraction Five-
Quarters Eighths
I I
Vulgar Fraction Seven-
E07 Left Curly Bracket
4 Definitions
Eighths
I I
E08 Left Square Bracket Trade Mark Sign
For the purposes of this part of lSO/IEC 9995, the
I I I
definitions given in lSO/IEC 9995-l apply.
Plus-Minus Sign
E09 Right Square Bracket
I I I
El0 Right Curly Bracket Degree Sign
I I I
El 1 Reverse Solidus Inverted Question Mark
I I I
El 2 Cedilla Ogonek
I I
5 Common secondary group layout
DO1 Commercial At Ohm Sign
I I
The common secondary group layout specified in
Do2 Latin Small Letter I Latin Capital Letter L
lSO/IEC 9995-3 requires a keyboard with 48 graphic
with Stroke with Stroke
I I
keys according to lSO/IEC 9995-2. This layout re-
quires the provision of a second group as defined in DO3 Latin Small Ligature oe Latin Capital Ligature OE
lSO/IEC 9995-l. The graphic characters of group 1
DO4 Pilcrow Sign Registered Sign
and the layout of these on the keyboard are defined
by the relevant national keyboard layout standard or
Do5 Latin Small Letter t Latin Capital Letter T
established by common usage. The graphic charac-
with Stroke with Stroke
I I
ters of the common secondary group (group 2) are
DO6 Leftwards Arrow Yen Sign
those of the repertoire of lSO/lEC 6937 that are not
I I
found as group 1 characters in all national keyboard
Upwards Arrow
DO7 Downwards Arrow
layouts nor in layouts established by common usage I I I
in a particular country. This leads to a certain dupli-
Latin Small Letter i with-
DO8 Rightwards Arrow
cation of graphic characters between the group I lay-
out Dot
I I
outs and the layout of the common secondary group
D0g Latin Small Letter 0 Latin Capital Letter 0
(group 2). However, it allows the graphic characters
with Stroke with Stroke
of the common secondary group and their allocation
I I
to keys to be always the same for their use with any
Dlo Latin Small Letter Latin Capital Letter
established Latin group layout.
Thorn Thorn
I I
The allocation of the characters of the common sec-
Dl I Diaeresis Ring Above
I I I I
ondary group (group 2) shall be as defined in table 1.
2

---------------------- Page: 6 --
...

SLOVENSKI STANDARD
SIST ISO/IEC 9995-3:1995
01-junij-1995
Information technology - Keyboard layouts for text and office systems - Part 3:
Complementary layouts of the alphanumeric zone of the alphanumeric section
Information technology -- Keyboard layouts for text and office systems -- Part 3:
Complementary layouts of the alphanumeric zone of the alphanumeric section
Technologies de l'information -- Disposition des claviers conçus pour la bureautique --
Partie 3: Dispositions complémentaires de la zone alphanumérique du module
alphanumérique
Ta slovenski standard je istoveten z: ISO/IEC 9995-3:1994
ICS:
35.180 Terminalska in druga IT Terminal and other
periferna oprema IT peripheral equipment
SIST ISO/IEC 9995-3:1995 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.