SIST EN ISO 7045:1996

Pan head screws with type H or type Z cross recess - Product grade A (ISO 7045:1994)

This International Standard specifies the characteristics of cross recessed pan head screws of product grade A and with thread sizes from M1,6 to M10 inclusive. If other specifications are required, they should be selected from existing International Standards, for example ISO 262, ISO 888, ISO 898-1, ISO 965-2, ISO 3506.

Flachkopfschrauben mit Kreuzschlitz Form H or Z - Produktklasse A (ISO 7045:1994)

Diese Norm enthält Festlegungen über Flachkopfschrauben mit Kreuzschlitz, Produktklasse A, mit Gewinde von M 1,6 bis M 10. Werden in besonderen Fällen a andere Festlegungen als die in der vorliegenden Internationalen Norm benötigt, so sind diese den bestehenden Internationalen Normen zu entnehmen, z. B. ISO 262, ISO 888, ISO 898-1, ISO 965-2 und ISO 3506.

Vis a métaux a tete cylindrique bombée large a empreinte cruciforme de type H ou de type Z - Grade A (ISO 7045:1994)

La présente Norme internationale spécifie les caractéristiques des vis a métaux a tete cylindrique bombée large a empreinte cruciforme, de grade A et de diametre nominal de filetage m1,6 a M10 inclus. Si d'autres spécifications sont requises, on devrait les choisir dans les Normes internationales existantes, par exemple ISO 262, ISO 888, ISO 898-1, ISO 965-2, ISO 3506.

Vijaki z lečasto valjasto glavo in križno zarezo - Razred izdelave A

General Information

• Status: Withdrawn
• Publication Date: 31-Mar-1996
• Withdrawal Date: 23-Oct-2011
• ICS: 21.060.10 - Bolts, screws, studs
• Technical Committee: ISEL - Mechanical elements
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 21-Oct-2011
• Due Date: 13-Nov-2011
• Completion Date: 24-Oct-2011
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: EN ISO 7045:1994 - Pan head screws with type H or type Z cross recess - Product grade A (ISO 7045:1994)

Relations

• Replaced By: SIST EN ISO 7045:2011 - Pan head screws with type H or type Z cross recess - Product grade A (ISO 7045:2011)
• Effective Date: 01-Dec-2011
• Replaced By: SIST EN ISO 7045:2011 - Pan head screws with type H or type Z cross recess - Product grade A (ISO 7045:2011)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 7045:1996
01-april-1996
9LMDNL]OHþDVWRYDOMDVWRJODYRLQNULåQR]DUH]R5D]UHGL]GHODYH$
Pan head screws with type H or type Z cross recess - Product grade A (ISO 7045:1994)
Flachkopfschrauben mit Kreuzschlitz Form H or Z - Produktklasse A (ISO 7045:1994)
Vis a métaux a tete cylindrique bombée large a empreinte cruciforme de type H ou de
type Z - Grade A (ISO 7045:1994)
Ta slovenski standard je istoveten z: EN ISO 7045:1994
ICS:
21.060.10 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
SIST EN ISO 7045:1996 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 7045:1996

---------------------- Page: 2 ----------------------

SIST E
...