iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60064:1995/A11:2008

(Amendment)

Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements

Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements

Amandma A11:2008 je dodatek k standardu SIST EN 60064:1995
Applies to lamps complying with the safety requirements in IEC 432-1 and having rated wattage of 25 W to 200 W, inclusive; rated voltage 100 V to 250 V; bulbs of the A or PS shapes; bulbs with clear, frosted or equivalently coated finishes, or white finishes; caps B22d, E26 or E27. States the performance requirements for lamps, including test methods and means of confirming compliance within the requirements. Whole production apraisal methods regarding a lamp manufacturer's test record on finished products are defined which can be applied for certification purposes.

Glühlampen für den Hausgebrauch und ähnliche allgemeine Beleuchtungszwecke - Anforderungen an die Arbeitsweise

Lampes à filament de tungstène pour usage domestique et éclairage général similaire - Prescriptions de performances

Žarnice z volframovo nitko za uporabo v stanovanjih in podobnih splošnih primerih razsvetljave - Tehnične zahteve (EN 60064:1995/A11:2007)

General Information

Status
Published
Publication Date
27-Nov-2007
ICS
29.140.20 - Incandescent lamps
Technical Committee
IESV - Lamps and related equipment
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
26-Nov-2007
Due Date
31-Jan-2008
Completion Date
28-Nov-2007
Ref Project
EN 60064:1995/A11:2007 - Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements

Relations

Amends
SIST EN 60064:1995 - Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements
Effective Date
01-Jan-2008
Amends
SIST EN 60064:1995 - Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements
Effective Date
28-Jan-2023

Buy Standard

EN 60064:1995/A11:2008EN 60064:1995/A11:2008
PreviousNext
Amendment
EN 60064:1995/A11:2008
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60064:1995/A11:2008
01-januar-2008
äDUQLFH]YROIUDPRYRQLWNR]DXSRUDERYVWDQRYDQMLKLQSRGREQLKVSORãQLK
SULPHULKUD]VYHWOMDYH7HKQLþQH]DKWHYH (1$
Tungsten filament lamps for domestic and similar general lighting purposes -
Performance requirements (EN 60064:1995/A11:2007)
Glühlampen für den Hausgebrauch und ähnliche allgemeine Beleuchtungszwecke -
Anforderungen an die Arbeitsweise (EN 60064:1995/A11:2007)
Lampes a filament de tungstene pour usage domestique et éclairage général similaire -
Prescriptions de performances (EN 60064:1995/A11:2007)
Ta slovenski standard je istoveten z: EN 60064:1995/A11:2007
ICS:
29.140.20 Žarnice z žarilno nitko Incandescent lamps
SIST EN 60064:1995/A11:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 60064/A11

NORME EUROPÉENNE
November 2007
EUROPÄISCHE NORM

ICS 29.140.20


English version


Tungsten filament lamps for domestic
and similar general lighting purposes -
Performance requirements



Lampes à filament de tungstène  Glühlampen für den Hausgebrauch
pour usage domestique und ähnliche allgemeine
et éclairage général similaire - Beleuchtungszwecke -
Prescriptions de performances Anforderungen an die Arbeitsweise





This amendment A11 modifies the European Standard EN 60064:1995; it was approved by CENELEC on
2007-11-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to
the Central Secretariat has the same status as the official versions.

CENELEC me
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 60810:2018/A2:2022(Amendment)
Lamps, light sources and LED packages for road vehicles - Performance requirements (IEC 60810:2017/AMD2:2022)
EN IEC 60810:2018/A2:2022
  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60809:2021(Main)
Lamps and light sources for road vehicles - Dimensional, electrical and luminous requirements (IEC 60809:2021)
EN IEC 60809:2021

This document is applicable to electric light sources (see Note 1) for use in automotive
applications, for example in road illumination devices and/or light signalling devices for road
vehicles.
It is especially applicable to light sources listed in UN Resolution R.E.5 and light sources subject
to other legislations.
This document specifies the technical requirements for interchangeability for example
dimensional, electrical and photometrical characteristics, and includes test methods.
For the light sources listed in this document, the data sheets are contained either in this
document or are included by reference to UN Resolution R.E.5.
Performance requirements are specified in IEC 60810, for example life, torsion strength,
resistance to vibration and shock.
The requirements for miniature light sources for supplementary purposes, not subject to
legislation, are specified in IEC 60983.
NOTE 1 The terms "lamp" and "light source" are both used in this document to mean the same product, so the two
terms are interchangeable throughout this document.
NOTE 2 In various vocabularies and standards, different terms are used for "incandescent lamp"
(IEC 60050845:
1987, 845-07-04), "discharge lamp" (IEC 60050-845:1987, 845-07-17) and "LED lamp". In this
document "filament lamp", "discharge lamp" and "LED light source" are used, however, where only "lamp" or "light
source" is written, all light sources, independent of the technology used, are meant, unless the context clearly shows
that it applies to one kind of technology only. In the UN Regulations, the word "light source" is used for the products
specified in this document.
NOTE 3 Wherever the term "device" is used, it is meant to designate equipment which is used as a luminaire. It
can for instance take the form and purpose of a headlight or signal light.

  • Standard
    97 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60810:2018/A1:2019(Amendment)
Lamps, light sources and LED packages for road vehicles - Performance requirements (IEC 60810:2017/A1:2019)
EN IEC 60810:2018/A1:2019
  • Amendment
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60809:2015/A3:2019(Amendment)
Lamps for road vehicles - Dimensional, electrical and luminous requirements (IEC 60809:2014/A3:2019)
EN 60809:2015/A3:2019
  • Amendment
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60810:2018(Main)
Lamps, light sources and led packages for road vehicles - Performance requirements (IEC 60810:2017)
EN IEC 60810:2018

This document is applicable to filament lamps, discharge lamps, LED light sources and LED
packages to be used in road vehicles, i.e. in headlamps, fog-lamps, signalling lamps and
interior lighting. It is especially applicable to those lamps and light sources which are listed in
IEC 60809.
It specifies requirements and test methods for the measurement of performance characteristics
such as lamp life, luminous flux maintenance, torsion strength, glass bulb strength
and resistance to vibration and shock. Moreover, information on temperature limits, maximum
lamp outlines and maximum tolerable voltage surges is given as guidance for lighting and
electrical equipment design.
For some of the requirements given in this document, reference is made to data given in
tables. For lamps not listed in such tables, the relevant data are supplied by the lamp
manufacturer or responsible vendor.
The performance requirements are additional to the basic requirements specified in
IEC 60809. They are, however, not intended to be used by authorities for legal type-approval
purposes.
NOTE 1 In the various vocabularies and standards, different terms are used for "incandescent lamp"
(IEC 60050-845:1987, 845-07-04) and "discharge lamp" (IEC 60050-845:1987, 845-07-17). In this document,
"filament lamp" and "discharge lamp" are used. However, where only “lamp” is written both types are meant, unless
the context clearly shows that it applies to one type only.
NOTE 2 This document does not apply to luminaires.
NOTE 3 In this document, the term LED light source is used, in other standards the term LED lamps can be used
to describe similar products.

  • Standard
    93 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60809:2015/A2:2018(Amendment)
Lamps for road vehicles - Dimensional, electrical and luminous requirements (IEC 60809:2014/A2:2017)
EN IEC 60809:2015/A2:2018

EN-IEC 60809 is applicable to replaceable and standardised lamps (filament lamps, discharge lamps and LED light sources) to be used in headlamps, fog-lamps and signalling lamps for road vehicles. In some applications, these lamps may be installed as nonreplaceable. This standard is especially applicable to those lamps which are the subject of legislation. In particular, it includes the lamps contained in Regulations No. 37, No. 99, No. 128 and its series of amendments of the Geneva Agreement of 20 March 1958 of the United Nations Economic Commission for Europe (UNECE). However, the standard may be used for other lamps falling under the scope of this standard, as well as lamps which are subject of legislation but not contained in Regulations No. 37, No. 99 and No. 128, e.g. the non-replaceable (filament) lamps and LED modules. For replaceable and standardised lamps, the standard specifies the technical requirements with methods of tests and basic interchangeability (dimensional, electrical and luminous) for lamps of normal production and for standard (étalon) lamps. For most of the requirements given in this standard, reference is made to the “relevant lamp data sheet”. For all lamps listed in Clause 8, data sheets are contained in this standard or included by reference. For other lamps, the relevant data are supplied by the lamp manufacturer or responsible vendor. It could be based on national legislation. Other requirements to replaceable and standardised lamps such as lamp life, luminous flux maintenance, torsion strength and resistance to vibration and shock are specified in IEC 60810. Such requirements to non-replaceable lamps are given in this standard. For some test methods, reference is made to IEC 60810. Road vehicle lamps for supplementary purposes which are not the subject of legislation are specified in IEC 60983. In countries which legislate for approval, for example under the terms of the aforementioned UN Regulations, it is suggested that reference is made to this standard for assessment of compliance. IEC 60810 and IEC 60983 are not intended for that purpose.

  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60809:2015/A1:2018(Amendment)
Lamps for road vehicles - Dimensional, electrical and luminous requirements (IEC 60809:2014/A1:2017)
EN 60809:2015/A1:2017

The contents of the interpretation sheet 1 of July 2017 have been included in this copy.

  • Amendment
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60357:2004/A11:2016(Amendment)
Tungsten halogen lamps (non-vehicle) - Performance specifications
EN 60357:2003/A11:2016

This International Standard specifies the performance requirements for single-capped and double-capped tungsten halogen lamps, having rated voltages of up to 250 V, used for the following applications: · Projection (including cinematograph and still projection) · · Photographic (including studio) · · Floodlighting · · Special purpose · · General purpose · · Stage lighting This third edition cancels and replaces the second edition published in 1982 and amendments 1(1984), 2(1985), 3(1987), 4(1989), 5(1992), 6(1993), 7(1994), 8(1995), 9(1996), 10(1996), 11(1997), 12(1999) and 13(2000

  • Amendment
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60630:2001/A7:2015(Amendment)
Maximum lamp outlines for incandescent lamps
EN 60630:1998/A7:2015
  • Amendment
    13 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60809:2015(Main)
Lamps for road vehicles - Dimensional, electrical and luminous requirements
EN 60809:2015

This International Standard is applicable to replaceable and standardised lamps (filament
lamps, discharge lamps and LED light sources) to be used in headlamps, fog-lamps and
signalling lamps for road vehicles. In some applications, these lamps may be installed as nonreplaceable.
This standard is especially applicable to those lamps which are the subject of legislation. In
particular, it includes the lamps contained in Regulations No. 37, No. 99, No. 128 and its series
of amendments of the Geneva Agreement of 20 March 1958 of the United Nations Economic
Commission for Europe (UNECE). However, the standard may be used for other lamps falling
under the scope of this standard, as well as lamps which are subject of legislation but not
contained in Regulations No. 37, No. 99 and No. 128, e.g. the non-replaceable (filament) lamps
and LED modules.
For replaceable and standardised lamps, the standard specifies the technical requirements
with methods of tests and basic interchangeability (dimensional, electrical and luminous) for
lamps of normal production and for standard (étalon) lamps.
For most of the requirements given in this standard, reference is made to the “relevant lamp
data sheet”. For all lamps listed in Clause 8, data sheets are contained in this standard or
included by reference. For other lamps, the relevant data are supplied by the lamp
manufacturer or responsible vendor. It could be based on national legislation.
Other requirements to replaceable and standardised lamps such as lamp life, luminous flux
maintenance, torsion strength and resistance to vibration and shock are specified in IEC 60810.
Such requirements to non-replaceable lamps are given in this standard.
For some test methods, reference is made to IEC 60810.
Road vehicle lamps for supplementary purposes which are not the subject of legislation are
specified in IEC 60983.
In countries which legislate for approval, for example under the terms of the aforementioned
UN Regulations, it is suggested that reference is made to this standard for assessment of
compliance. IEC 60810 and IEC 60983 are not intended for that purpose.
NOTE 1 In various vocabularies and standards, different terms are used for "incandescent lamp", "discharge
lamp" and “LED lamp”. In this standard "filament lamp", "discharge lamp" and “LED light source” are used. However,
where only "lamp" is written all three kinds of lamp are meant, unless the context clearly shows that it applies to
one kind only.
NOTE 2 Wherever the term “device” is used, it is meant to designate equipment which is used as luminaire. It can
take the form and purpose of a headlight or signal light.

  • Standard
    85 pages
    English language
    sale 10% off
    e-Library read for
    1 day