SIST EN 60630:2001/A7:2015

Maximum lamp outlines for incandescent lamps

Maximale Lampen-Hüllkurven für Glühlampen

Encombrement maximal des lampes à incandescence

Največje zunanje mere žarnic - Dopolnilo A7

General Information

• Status: Published
• Publication Date: 18-May-2015
• ICS: 29.140.20 - Incandescent lamps
• Technical Committee: IESV - Lamps and related equipment
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 03-Apr-2015
• Due Date: 08-Jun-2015
• Completion Date: 19-May-2015
• Ref Project: EN 60630:1998/A7:2015 - Maximum lamp outlines for incandescent lamps

Relations

• Amends: SIST EN 60630:2001 - Maximum lamp outlines for incandescent lamps
• Effective Date: 01-Jun-2015
• Amends: SIST EN 60630:2001 - Maximum lamp outlines for incandescent lamps
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60630:2001/A7:2015
01-junij-2015
1DMYHþMH]XQDQMHPHUHåDUQLF'RSROQLOR$
Maximum lamp outlines for incandescent lamps
Maximale Lampen-Hüllkurven für Glühlampen
Encombrement maximal des lampes à incandescence
Ta slovenski standard je istoveten z: EN 60630:1998/A7:2015
ICS:
29.140.20 Žarnice z žarilno nitko Incandescent lamps
SIST EN 60630:2001/A7:2015 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60630:2001/A7:2015

---------------------- Page: 2 ----------------------

SIST EN 60630:2001/A7:2015


EUROPEAN STANDARD EN 60630:1998/A7

NORME EUROPÉENNE

EUROPÄISCHE NORM
February 2015
ICS 29.140.20

English Version
Maximum lamp outlines for incandescent lamps
(IEC 60630:1994/A7:2014 , modified)
Encombrement maximal des lampes à incandescence Maximale Lampen-Hüllkurven für Glühlampen
(IEC 60630:1994/A7:2014 , modifiée) (IEC 60630:1994/A7:2014 , modifiziert)
This amendment A7 modifies the European Standard EN 60630:1998; it was approved by CENELEC on 2015-01-19. CENELEC members
are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the status of a
national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 60630:1998/A7:2015 E

---------------------- Page: 3 ----------------------

SIST EN 60630:2001/A7:2015
EN 60630:1998/A7:2015 - 2 -

Foreword
The text of document 34A/1759/FDIS, future IEC 60630:1994/A7, prepared by SC 34A "Lamps" of
IEC/TC 34 "Lamps and related equipment" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 60630:1998/A7:2015.
A draft amendment, which covers common modifications to IEC 60630:1994/A7 (34A/1759/FDIS), was
prepared by CLC/TC 34A "Lamps" and approved by CENELEC.
The following dates are fixed:
• latest date by which the document has to
(dop) 2016-01-19
be implemented at national level by
publication of an identical
national standard or by endorsement
• latest date by which the national
(dow) 2018-01-19
standards conflicting with the document
have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Clauses, subclauses, notes, tables, figures and annexes which are additional to those in
IEC 60630:1998/A7:2014 are prefixed “Z”.
Endorsement notice
The text of the International Standard IEC 60630:1994/A7:2014 was approved by CENELEC as a
European Standard with agreed common modifications.
COMMON MODIFICATIONS
Add the following annex:
Annex ZA (normative) Normative references to international publications with their corresponding
European publications

Delete all references to lamps with E17, E26 and E39 caps.

---------------------- Page: 4 ----------------------

SIST EN 60630:2001/A7:2015
- 3 - EN 60630:1998/A7:2015
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu

Publication Year Title EN/HD Year
IEC 60061-1 -  Lamp caps and holders together with EN 60061-1 -
gauges for the control of interchangeability
and safety -
Part 1: Lamp caps
IEC 60061-3 -  Lamp caps and holders together with EN 60061-3 -
gauges for the control of interchangeability
and safety -
Part 3: Gauges
IEC 60064 -  Tungsten filament lamps for domestic EN 60064 -
and similar general lighting purposes -
Performance requirements
IEC 60357 -  Tungsten halogen lamps (non-vehicle) - EN 60357 -
Performance specifications
IEC 60432-1 -  Incandescent lamps - Safety EN 60432-1 -
specifications -
Part 1: Tungsten filament lamps for
domestic and similar general lighting
purposes
IEC 60432-2 -  Incandescent lamps - Safety specifications EN 60432-2 -
- Part 2: Tungsten halogen lamps for
domestic and similar general lighting
purposes
IEC 60432-3 -  Incandescent lamps - Safety specifications EN 60432-3 -
- Part 3: Tungsten halogen lamps (non-
vehicle)
IEC/TR 60887 -  Glass bulb designation system for lamps - -
IEC 61126 -  Procedure for use in the preparation of - -
maximum lamp outlines

---------------------- Page: 5 ----------------------

SIST EN 60630:2001/A7:2015

---------------------- Page: 6 ----------------------

SIST EN 60630:2001/A7:2015



IEC 60630

®


Edition 2.0 2014-06




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE




A MENDMENT 7

AM ENDEMENT 7





Maximum lamp outlines for incandescent lamps



Encombrement maximal des lampes à incandescence



















INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE

PRICE CODE
INTERNATIONALE

CODE PRIX E


ICS 29.140.20 ISBN 978-2-8322-1664-4



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 60630:2001/A7:2015
IEC 60630:1994/AMD7:2014 © IEC 2014
AVANT-PROPOS
Le présent amendement a été établi par le sous-comité 34A: Lampes, du comité d'études 34
de l'IEC: Lampes et équipements associés.
Le texte de cet amendement est issu des documents suivants:
FDIS Rapport de vote
34A/1759/FDIS 34A/1772/RVD

Le rapport de vote indiqué dans le tableau ci-dessus donne toute information sur le vote ayant
abouti à l'approbation de cet amendement.
Le comité a décidé que le contenu de cette publication ne sera pas modifié avant la date de
stabilité indiquée sur le site web de l'IEC sous "http://webstore.iec.ch" dans les données
relatives à la publication recherchée. A cette date, la publication sera
• reconduite,
• supprimée,
• remplacée par une édition révisée, ou
• amendée.
_____________

---------------------- Page: 8 ----------------------

SIST EN 60630:2001/A7:2015
 IEC 60630:1994/AMD7  IEC 2014

FOREWORD
This amendment has been prepared by subcommittee 34A: Lamps, of IEC technical
committee 34: Lamps and related equipment.
The text of this amendment is based on the following documents:
FDIS Report on voting
34A/1759/FDIS 34A/1772/RVD

Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
_____________

---------------------- Page: 9 ----------------------

SIST EN 60630:2001/A7:2015
IEC 60630:1994/AMD7:2014 © IEC 2014

INSTRUCTIONS POUR L’INSERTION DES INSTRUCTIONS FOR THE
NOUVELLES PAGES ET FEUILLES INSERTION OF NEW PAGES
DE CARACTÉRISTIQUES DANS LA AND DATA SHEETS
PUBLICATION 60630 IN PUBLICATION 60630
----------------------- -----------------------

1. Retirer les pages 6, et 8 existantes, 1. Remove the existing pages 7, and 9,
insérer les nouvelles pages 6, et 8. insert the new pages 7, and 9.

2. Remplacer les feuilles de caractéristiques: 2. Replace the da ta sheet s:
60630-IEC-1010-5 par 60630-IEC-1010-6 60630-IEC-1010-5 with 60630-IEC-1010-6
60630-IEC-1020-5 par 60630-IEC-1020-6 60630-IEC-1020-5 with 60630-IEC-1020-6



----------------------- -----------------------

---------------------- Page: 10 ----------------------

SIST EN 60630:2001/A7:2015
– 6 – IEC 60630:1994/AMD7  IEC 2014
ENCOMBREMENT MAXIMAL DES LAMPES À INCANDESCENCE



1 Généralités
1.1 Domaine d’application
La présente Norme internationale traite des contours d’encombrement maximal des lampes à
incandescence (y compris les lampes tungstène-halogène).
NOTE Lorsqu’il y a référence au cu
...