Connectors for electronic equipment - Tests and measurements - Part 21-1: R.F. resistance tests - Test 21a: R.F. shunt resistance (IEC 60512-21-1:2010)

This part of IEC 60512, when required by the detail specification, is used for testing connectors within the scope of technical committee 48. It may also be used for similar devices when specified in a detail specification. The object of this standard is to detail a standard test method to determine the value of RF shunt resistance which degrades the quality factor of an L/C circuit when a connector is connected in parallel. This value is expressed in terms of a parallel damping resistance.

Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren - Teil 21-1: Prüfungen der HF-Güte - Prüfung 21a: HF-Dämpfungswiderstand (IEC 60512-21-1:2010)

Connecteurs pour équipements électroniques - Essais et mesures - Partie 21-1: Essais de résistance aux fréquences radioélectriques - Essai 21a: Résistance parallèle aux fréquences radioélectriques (CEI 60512-21-1:2010)

La CEI 60512-21-1:2010 est utilisée pour les essais des connecteurs du domaine d'activité du comité d'études 48, lorsque la spécification particulière l'exige. Elle peut également être utilisée pour des dispositifs similaires lorsqu'une spécification particulière le stipule. L'objet de cette norme est de définir une méthode d'essai normalisée pour déterminer la valeur de la résistance parallèle aux fréquences radioélectriques qui dégrade le facteur de qualité d'un circuit L/C lorsqu'un connecteur est raccordé en parallèle. Cette valeur est exprimée en termes d'une résistance parallèle d'amortissement.

Konektorji za elektronsko opremo - Preskusi in meritve - 21-1. del: Preskusi odpornosti proti radijskim frekvencam - Preskus 21a: Odpornost proti vzporedni radijski frekvenci (IEC 60512-21-1:2010)

Ta del IEC 60512, kadar ga zahteva podrobna specifikacija, se uporablja za preskušanje konektorjev v okviru tehničnega odbora 48. Lahko se uporablja tudi za podobne naprave, kadar ga določa podrobna specifikacija. Cilj tega standarda je podrobno opredeliti standardno preskusno metodo za določevanje vrednost odpornosti proti vzporedni radijski frekvenci, ki zmanjšuje dejavnik kakovosti toka L/C, kadar je konektor povezan vzporedno. Ta vrednost je izražena glede na vzporedno dušilno odpornostjo.

General Information

Status
Published
Publication Date
22-Jul-2010
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
14-Jul-2010
Due Date
18-Sep-2010
Completion Date
23-Jul-2010

Buy Standard

Standard
EN 60512-21-1:2010
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60512-21-1:2010
01-september-2010
Konektorji za elektronsko opremo - Preskusi in meritve - 21-1. del: Preskusi
odpornosti proti radijskim frekvencam - Preskus 21a: Odpornost proti vzporedni
radijski frekvenci (IEC 60512-21-1:2010)
Connectors for electronic equipment - Tests and measurements - Part 21-1: R.F.
resistance tests - Test 21a: R.F. shunt resistance (IEC 60512-21-1:2010)
Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren - Teil 21-1:
Prüfungen der HF-Güte - Prüfung 21a: HF-Dämpfungswiderstand (IEC 60512-21-
1:2010)
Connecteurs pour équipements électroniques - Essais et mesures - Partie 21-1: Essais
de résistance aux fréquences radioélectriques - Essai 21a: Résistance parallèle aux
fréquences radioélectriques (CEI 60512-21-1:2010)
Ta slovenski standard je istoveten z: EN 60512-21-1:2010
ICS:
31.220.10 9WLþLLQYWLþQLFHNRQHNWRUML Plug-and-socket devices.
Connectors
SIST EN 60512-21-1:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60512-21-1:2010

---------------------- Page: 2 ----------------------

SIST EN 60512-21-1:2010

EUROPEAN STANDARD
EN 60512-21-1

NORME EUROPÉENNE
July 2010
EUROPÄISCHE NORM

ICS 31.220.01


English version


Connectors for electronic equipment -
Tests and measurements -
Part 21-1: R.F. resistance tests -
Test 21a: R.F. shunt resistance
(IEC 60512-21-1:2010)


Connecteurs pour équipements Steckverbinder für elektronische
électroniques - Einrichtungen -
Essais et mesures - Mess- und Prüfverfahren -
Partie 21-1: Essais de résistance Teil 21-1: Prüfungen der HF-Güte -
aux fréquences radioélectriques - Prüfung 21a: HF-Dämpfungswiderstand
Essai 21a: Résistance parallèle (IEC 60512-21-1:2010)
aux fréquences radioélectriques
(CEI 60512-21-1:2010)




This European Standard was approved by CENELEC on 2010-07-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60512-21-1:2010 E

---------------------- Page: 3 ----------------------

SIST EN 60512-21-1:2010
EN 60512-21-1:2010 - 2 -
Foreword
The text of document 48B/2151/FDIS, future edition 1 of IEC 60512-21-1, prepared by SC 48B,
Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic
equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60512-21-1 on 2010-07-01.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2011-04-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2013-07-01
__________
Endorsement notice
The text of the International Standard IEC 60512-21-1:2010 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 60512-21-1:2010
IEC 60512-21-1
®
Edition 1.0 2010-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE


Connectors for electronic equipment – Tests and measurements –
Part 21-1: RF resistance tests – Test 21a: RF shunt resistance

Connecteurs pour équipements électroniques – Essais et mesures –
Partie 21-1: Essais de résistance aux fréquences radioélectriques – Essai 21a:
Résistance parallèle aux fréquences radioélectriques

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
D
CODE PRIX
ICS 31.220.01 ISBN 978-2-88910-954-8
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 5 ----------------------

SIST EN 60512-21-1:2010
– 2 – 60512-21-1 © IEC:2010
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

CONNECTORS FOR ELECTRONIC EQUIPMENT –
TESTS AND MEASUREMENTS –

Part 21-1: RF resistance tests –
Test 21a: RF shunt resistance


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning stan
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.