SIST ES 202 504-18 V1.1.1:2008

• Abstract:

  New ParlayX specification to cover Device Management, corresponding to 3GPP TS 29.199-18 Rel-7. The present document is part 18 of the Stage 3 Parlay X 3 Web Services specification for Open Service Access (OSA).; The OSA specifications define an architecture that enables application developers to make use of network functionality through an open standardized interface, i.e. the OSA APIs.; The present document specifies the Device Capabilities and Configuration Web Service. The following are defined here:; • Name spaces.; • Sequence diagrams.; • Data definitions.; • Interface specification plus detailed method descriptions.; • Fault definitions.; • Service Policies.; • WSDL Description of the interfaces.

• Status: Published
• Publication Date: 14-Jul-2008
• ICS: 35.100.01 - Open systems interconnection in general
• Technical Committee: SPN - Services and Protocols for Networks
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 18-Jun-2008
• Due Date: 23-Aug-2008
• Completion Date: 15-Jul-2008
• Ref Project: ETSI ES 202 504-18 V1.1.1 (2008-05) - Open Service Access (OSA); Parlay X Web Services; Part 18: Device Capabilities and Configuration (Parlay X 3)

SIST ES 202 504-18 V1.1.1:2008 is the SIST publication of the ETSI standard for the Parlay X Device Capabilities and Configuration Web Service. It specifies how an application can query a device’s capabilities or equipment identifier, set up notifications for device identifier changes, and push or review device configurations through the Open Service Access (OSA) interface set. The document is aimed at application developers and operators who need a standard web service interface to device-related network functions.

What does SIST ES 202 504-18 V1.1.1:2008 specify?

SIST ES 202 504-18 V1.1.1:2008 specifies the Parlay X 3 web service for Device Capabilities and Configuration within OSA. It defines the service scope, XML namespaces, data types, interface operations, faults, service policies, and the WSDL representation.

The document is organized into these main parts: Scope, References, Definitions and abbreviations, Detailed service description, Namespaces, Sequence diagrams, XML Schema data type definition, Web Service interface definition, Fault definitions, Service policies, and two annexes.

Annex	What it covers
Annex A	Normative WSDL for Device Capabilities and Configuration
Annex B	Informative bibliography

What are the key requirements of SIST ES 202 504-18 V1.1.1:2008?

The standard defines how applications interact with a device-capability and configuration service, and the practical effect is that each operation has a specific input, output, and fault behavior.

Device capability queries

• Clause 4 and Clause 8.1 define getCapabilities and getDeviceId. The first returns the device type ID, device/model name, and a link to the User Agent Profile XML file; the second returns the equipment identifier, such as an IMEI.
• Both operations take a device address, not a group URI. If a group URI is used, fault POL0006 is returned. In practice, this means a client must address one device at a time when asking for these individual details.

Device identifier notifications

• Clause 8.2 defines startNotification and endNotification for equipment identifier changes. startNotification uses a correlator and a notification endpoint reference, and can monitor one or more device addresses.
• The service policies in Clause 10 control practical limits such as the maximum number of addresses, the maximum notification duration, and whether group and nested group URIs are supported. This matters when a system must size subscriptions and decide whether group monitoring is allowed.
• Clause 8.3 defines the notification callbacks deviceNotification, deviceError, and deviceEnd. These carry the correlator, the device address where relevant, the new device ID, or a service error reason.

Device configuration handling

• Clause 8.4 defines pushConfiguration, getConfigurationList, and getConfigurationHistory. pushConfiguration sends a chosen configuration to a device or a group of devices.
• getConfigurationList returns configurations available for a given device ID, and the service expects those configurations to be made available in advance by the gateway operator. In practice, this is the list an operator can offer to a specific handset model.
• getConfigurationHistory returns configurations previously pushed to a single device address. Group URIs are not used here, so the caller must work with an individual device address.

Data and interface structure

• Clause 7 defines the main XML Schema structures: ConfigurationDescription, ConfigurationHistory, and DeviceCapabilities.
• Clause 5 assigns separate XML namespaces for the service interfaces and data types.
• Clause 9 says there are no service-specific fault definitions, so implementations rely on the referenced faults and service policies instead.

What terms does SIST ES 202 504-18 V1.1.1:2008 define?

• OSA (Open Service Access) - the architecture that lets application developers use network functions through a standardized interface.
• Parlay X - the web services layer used here to expose OSA functions in web-service form.
• DeviceCapabilities - the interface used to request a device’s capabilities and equipment identifier.
• ConfigurationDescription - the data structure that identifies a configuration and points to its XML file.
• ConfigurationHistory - the data structure that combines a configuration with the time it was sent to a device.
• Correlator - the string used to match notification setup requests with later notification messages.
• Service policy - a parameter that controls notification limits and group support behavior.

Who uses SIST ES 202 504-18 V1.1.1:2008?

SIST ES 202 504-18 V1.1.1:2008 is used by application developers who build OSA-based service applications, by operators who need to query devices or push configuration, and by customer support staff who want to restore or inspect a subscriber’s device configuration. The service description explicitly shows customer relationship management and self-care use cases. It also depends on gateway-side storage for configuration files.

What changed in SIST ES 202 504-18 V1.1.1:2008 from the previous edition?

SIST ES 202 504-18 V1.1.1:2008 is equivalent to 3GPP TS 29.199-18 V7.0.0 (Release 7).

Which standards are used with SIST ES 202 504-18 V1.1.1:2008?

• W3C Recommendation: XML Schema Part 2: Datatypes - provides the XML Schema datatypes used for the service data types.
• ETSI ES 202 504-1: Open Service Access (OSA); Parlay X Web Services; Part 1: Common (Parlay X 3) - supplies shared definitions, abbreviations, and the WSDL compliance basis.
• OMA Client Provisioning - defines the configuration file format used for device configuration XML files.

What does the SIST ES 202 504-18 V1.1.1:2008 document contain?

The document contains service scenarios, sequence diagrams for capability queries, notification setup, and configuration push flows, plus XML Schema definitions for the main service structures. It also gives message-level interface definitions for each operation, including request and response elements and referenced faults. Annex A supplies the document/literal WSDL in accompanying text files, which is the part implementers use to generate or validate service interfaces.

Final draft ETSI ES 202 504-18 V1.1.1 (2008-02)
ETSI Standard
Open Service Access (OSA);
Parlay X Web Services;
Part 18: Device Capabilities and Configuration
(Parlay X 3)
�
2 Final draft ETSI ES 202 504-18 V1.1.1 (2008-02)

Reference
DES/TISPAN-01034-18-OSA
Keywords
API, OSA, service
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2008.
© The Parlay Group 2008.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
3 Final draft ETSI ES 202 504-18 V1.1.1 (2008-02)
Contents
Intellectual Property Rights.5
Foreword.5
1 Scope.7
2 References.7
2.1 Normative references.7
3 Definitions and abbreviations.8
3.1 Definitions.8
3.2 Abbreviations.8
4 Detailed service description .8
4.1 Device capabilities .8
4.2 Device configuration.8
4.3 Application scenarios.8
5 Namespaces.9
6 Sequence diagrams.9
6.1 Device capability.9
6.2 Device configuration.10
7 XML Schema data type definition .11
7.1 ConfigurationDescription Structure.11
7.2 ConfigurationHistory Structure.11
7.3 DeviceCapabilities Structure.11
8 Web Service interface definition.12
8.1 Interface: DeviceCapabilities .12
8.1.1 Operation: getCapabilities .12
8.1.1.1 Input message: getCapabilitiesRequest .12
8.1.1.2 Output message: getCapabilitiesResponse.12
8.1.1.3 Referenced faults.12
8.1.2 Operation: getDeviceId.12
8.1.2.1 Input message: getDeviceIdRequest .12
8.1.2.2 Output message: getDeviceIdResponse.12
8.1.2.3 Referenced faults.13
8.2 Interface: DeviceCapabilitiesNotificationManager .13
8.2.1 Operation: startNotification.13
8.2.1.1 Input message: startNotificationRequest.13
8.2.1.2 Output message: startNotificationResponse.13
8.2.1.3 Referenced faults.13
8.2.2 Operation: endNotification.14
8.2.2.1 Input message: endNotificationRequest.14
8.2.2.2 Output message: endNotificationResponse.14
8.2.2.3 Referenced faults.14
8.3 Interface: DeviceCapabilitiesNotification .14
8.3.1 Operation: deviceNotification.14
8.3.1.1 Input message: deviceNotificationRequest.14
8.3.1.2 Output message: deviceNotificationResponse.15
8.3.2 Operation: deviceError.15
8.3.2.1 Input message: deviceErrorRequest.15
8.3.2.2 Output message: deviceErrorResponse.15
8.3.3 Operation: deviceEnd.15
8.3.3.1 Input message: deviceEndRequest.15
8.3.3.2 Output message: deviceEndResponse.15
8.4 Interface: DeviceConfiguration.15
8.4.1 Operation: pushConfiguration.15
ETSI
4 Final draft ETSI ES 202 504-18 V1.1.1 (2008-02)
8.4.1.1 Input message: pushConfigurationRequest.16
8.4.1.2 Output message: pushConfigurationResponse.16
8.4.1.3 Referenced faults.16
8.4.2 Operation getConfigurationList.16
8.4.2.1 Input message: getConfigurationListRequest.16
8.4.2.2 Output message: getConfigurationListResponse .16
8.4.2.3 Referenced faults.16
8.4.3 Operation: getConfigurationHistory.16
8.4.3.1 Input message: getConfigurationHistoryRequest.17
8.4.3.2 Output message: getConfigurationHistoryResponse.17
8.4.3.3 Referenced faults.17
9 Fault definitions.17
10 Service policies .17
Annex A (normative): WSDL for Device Capabilities and Configuration .18
Annex B (informative): Bibliography.19
History .20

ETSI
5 Final draft ETSI ES 202 504-18 V1.1.1 (2008-02)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This ETSI Standard (ES) has been produced by ETSI Technical Committee Telecommunications and Internet
converged Services and Protocols for Advanced Networking (TISPAN), and is now submitted for the ETSI standards
Membership Approval Procedure.
The present document is part 18 of a multi-part deliverable covering Open Service Access (OSA); Parlay X 3 Web
Services, as identified below:
Part 1: "Common";
Part 2: "Third Party Call";
Part 3: "Call Notification";
Part 4: "Short Messaging";
Part 5: "Multimedia Messaging";
Part 6: "Payment";
Part 7: "Account Management";
Part 8: "Terminal Status";
Part 9: "Terminal Location";
Part 10: "Call Handling";
Part 11: "Audio Call";
Part 12: "Multimedia Conference";
Part 13: "Address List Management";
Part 14: "Presence";
Part 15: "Message Broadcast";
Part 16: "Geocoding";
Part 17: "Application-driven Quality of Service (QoS)";
Part 18: "Device Capabilities and Configuration";
Part 19: "Multimedia Streaming Control";
Part 20: "Multimedia Multicast Session Management".
ETSI
6 Final draft ETSI ES 202 504-18 V1.1.1 (2008-02)
The present document has been defined jointly between ETSI, The Parlay Group (http://www.parlay.org) and the 3GPP.
The present document forms part of the Parlay X 3.0 set of specifications.
The present document is equivalent to 3GPP TS 29.199-18 V7.0.0 (Release 7).
ETSI
7 Final draft ETSI ES 202 504-18 V1.1.1 (2008-02)
1 Scope
The present document is part 18 of the Stage 3 Parlay X 3 Web Services specification for Open Service Access (OSA).
The OSA specifications define an architecture that enables application developers to make use of network functionality
through an open standardized interface, i.e. the OSA APIs.
The present document specifies the Device Capabilities and Configuration Web Service. The following are defined
here:
• Name spaces.
• Sequence diagrams.
• Data definitions.
• Interface specification plus detailed method descriptions.
• Fault definitions.
• Service Policies.
• WSDL Description of the interfaces.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• Non-specific reference may be made only to a complete document or a part thereof and only in the following
cases:
- if it is accepted that it will be possible to use all future changes of the referenced document for the
purposes of the referring document;
- for informative references.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
For online referenced documents, information sufficient to identify and locate the source shall be provided. Preferably,
the primary source of the referenced document should be cited, in order to ensure traceability. Furthermore, the
reference should, as far as possible, remain valid for the expected life of the document. The reference shall include the
method of access to the referenced document and the full network address, with the same punctuation and use of upper
case and lower case letters.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
2.1 Normative references
The following referenced documents are indispensable for the application of the present document. For dated
references, only the edition cited applies. For non-specific references, the latest edition of the referenced document
(including any amendments) applies.
[1] W3C Recommendation (2 May 2001): "XML Schema Part 2: Datatypes".
NOTE: Available at http://www.w3.org/TR/2001/REC-xmlschema-2-20010502/.
ETSI
8 Final draft ETSI ES 202 504-18 V1.1.1 (2008-02)
[2] ETSI ES 202 504-1: "Open Service Access (OSA); Parlay X Web Services; Part 1: Common
(Parlay X 3)".
[3] OMA Client Provisioning.
NOTE: Available at http://www.wapforum.org/DTD/prov.dtd.
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in ES 202 504-1 [2] apply.
3.2 Abbreviations
For the purposes of the present document, the abbrev
...

ETSI Standard
Open Service Access (OSA);
Parlay X Web Services;
Part 18: Device Capabilities and Configuration
(Parlay X 3)
�
2 ETSI ES 202 504-18 V1.1.1 (2008-05)

Reference
DES/TISPAN-01034-18-OSA
Keywords
API, OSA, service
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2008.
© The Parlay Group 2008.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
3 ETSI ES 202 504-18 V1.1.1 (2008-05)
Contents
Intellectual Property Rights.5
Foreword.5
1 Scope.7
2 References.7
2.1 Normative references.7
3 Definitions and abbreviations.8
3.1 Definitions.8
3.2 Abbreviations.8
4 Detailed service description .8
4.1 Device capabilities .8
4.2 Device configuration.8
4.3 Application scenarios.8
5 Namespaces.9
6 Sequence diagrams.9
6.1 Device capability.9
6.2 Device configuration.10
7 XML Schema data type definition .11
7.1 ConfigurationDescription Structure.11
7.2 ConfigurationHistory Structure.11
7.3 DeviceCapabilities Structure.11
8 Web Service interface definition.12
8.1 Interface: DeviceCapabilities .12
8.1.1 Operation: getCapabilities .12
8.1.1.1 Input message: getCapabilitiesRequest .12
8.1.1.2 Output message: getCapabilitiesResponse.12
8.1.1.3 Referenced faults.12
8.1.2 Operation: getDeviceId.12
8.1.2.1 Input message: getDeviceIdRequest .12
8.1.2.2 Output message: getDeviceIdResponse.12
8.1.2.3 Referenced faults.13
8.2 Interface: DeviceCapabilitiesNotificationManager .13
8.2.1 Operation: startNotification.13
8.2.1.1 Input message: startNotificationRequest.13
8.2.1.2 Output message: startNotificationResponse.13
8.2.1.3 Referenced faults.13
8.2.2 Operation: endNotification.14
8.2.2.1 Input message: endNotificationRequest.14
8.2.2.2 Output message: endNotificationResponse.14
8.2.2.3 Referenced faults.14
8.3 Interface: DeviceCapabilitiesNotification .14
8.3.1 Operation: deviceNotification.14
8.3.1.1 Input message: deviceNotificationRequest.14
8.3.1.2 Output message: deviceNotificationResponse.15
8.3.2 Operation: deviceError.15
8.3.2.1 Input message: deviceErrorRequest.15
8.3.2.2 Output message: deviceErrorResponse.15
8.3.3 Operation: deviceEnd.15
8.3.3.1 Input message: deviceEndRequest.15
8.3.3.2 Output message: deviceEndResponse.15
8.4 Interface: DeviceConfiguration.15
8.4.1 Operation: pushConfiguration.15
ETSI
4 ETSI ES 202 504-18 V1.1.1 (2008-05)
8.4.1.1 Input message: pushConfigurationRequest.16
8.4.1.2 Output message: pushConfigurationResponse.16
8.4.1.3 Referenced faults.16
8.4.2 Operation getConfigurationList.16
8.4.2.1 Input message: getConfigurationListRequest.16
8.4.2.2 Output message: getConfigurationListResponse .16
8.4.2.3 Referenced faults.16
8.4.3 Operation: getConfigurationHistory.16
8.4.3.1 Input message: getConfigurationHistoryRequest.17
8.4.3.2 Output message: getConfigurationHistoryResponse.17
8.4.3.3 Referenced faults.17
9 Fault definitions.17
10 Service policies .17
Annex A (normative): WSDL for Device Capabilities and Configuration .18
Annex B (informative): Bibliography.19
History .20

ETSI
5 ETSI ES 202 504-18 V1.1.1 (2008-05)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This ETSI Standard (ES) has been produced by ETSI Technical Committee Telecommunications and Internet
converged Services and Protocols for Advanced Networking (TISPAN).
The present document is part 18 of a multi-part deliverable covering Open Service Access (OSA); Parlay X 3 Web
Services, as identified below:
Part 1: "Common";
Part 2: "Third Party Call";
Part 3: "Call Notification";
Part 4: "Short Messaging";
Part 5: "Multimedia Messaging";
Part 6: "Payment";
Part 7: "Account Management";
Part 8: "Terminal Status";
Part 9: "Terminal Location";
Part 10: "Call Handling";
Part 11: "Audio Call";
Part 12: "Multimedia Conference";
Part 13: "Address List Management";
Part 14: "Presence";
Part 15: "Message Broadcast";
Part 16: "Geocoding";
Part 17: "Application-driven Quality of Service (QoS)";
Part 18: "Device Capabilities and Configuration";
Part 19: "Multimedia Streaming Control";
Part 20: "Multimedia Multicast Session Management".
ETSI
6 ETSI ES 202 504-18 V1.1.1 (2008-05)
The present document has been defined jointly between ETSI, The Parlay Group (http://www.parlay.org) and the 3GPP.
The present document forms part of the Parlay X 3.0 set of specifications.
The present document is equivalent to 3GPP TS 29.199-18 V7.0.0 (Release 7).
ETSI
7 ETSI ES 202 504-18 V1.1.1 (2008-05)
1 Scope
The present document is part 18 of the Stage 3 Parlay X 3 Web Services specification for Open Service Access (OSA).
The OSA specifications define an architecture that enables application developers to make use of network functionality
through an open standardized interface, i.e. the OSA APIs.
The present document specifies the Device Capabilities and Configuration Web Service. The following are defined
here:
• Name spaces.
• Sequence diagrams.
• Data definitions.
• Interface specification plus detailed method descriptions.
• Fault definitions.
• Service Policies.
• WSDL Description of the interfaces.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• Non-specific reference may be made only to a complete document or a part thereof and only in the following
cases:
- if it is accepted that it will be possible to use all future changes of the referenced document for the
purposes of the referring document;
- for informative references.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
For online referenced documents, information sufficient to identify and locate the source shall be provided. Preferably,
the primary source of the referenced document should be cited, in order to ensure traceability. Furthermore, the
reference should, as far as possible, remain valid for the expected life of the document. The reference shall include the
method of access to the referenced document and the full network address, with the same punctuation and use of upper
case and lower case letters.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
2.1 Normative references
The following referenced documents are indispensable for the application of the present document. For dated
references, only the edition cited applies. For non-specific references, the latest edition of the referenced document
(including any amendments) applies.
[1] W3C Recommendation (2 May 2001): "XML Schema Part 2: Datatypes".
NOTE: Available at http://www.w3.org/TR/2001/REC-xmlschema-2-20010502/.
ETSI
8 ETSI ES 202 504-18 V1.1.1 (2008-05)
[2] ETSI ES 202 504-1: "Open Service Access (OSA); Parlay X Web Services; Part 1: Common
(Parlay X 3)".
[3] OMA Client Provisioning.
NOTE: Available at http://www.wapforum.org/DTD/prov.dtd.
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in ES 202 504-1 [2] apply.
3.2 Abbreviations
For the purposes of the present document, the abbreviations defined in ES 202
...

SLOVENSKI STANDARD
01-september-2008
Odprti dostop do storitve (OSA) - Spletne storitve Parlay X - 18. del: Zmožnosti in
konfiguracija naprav (Parlay X 3)
Open Service Access (OSA) - Parlay X Web Services - Part 18: Device Capabilities and
Configuration (Parlay X 3)
Ta slovenski standard je istoveten z: ES 202 504-18 Version 1.1.1
ICS:
35.100.01 Medsebojno povezovanje Open systems
odprtih sistemov na splošno interconnection in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

ETSI Standard
Open Service Access (OSA);
Parlay X Web Services;
Part 18: Device Capabilities and Configuration
(Parlay X 3)
�
2 ETSI ES 202 504-18 V1.1.1 (2008-05)

Reference
DES/TISPAN-01034-18-OSA
Keywords
API, OSA, service
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2008.
© The Parlay Group 2008.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
3 ETSI ES 202 504-18 V1.1.1 (2008-05)
Contents
Intellectual Property Rights.5
Foreword.5
1 Scope.7
2 References.7
2.1 Normative references.7
3 Definitions and abbreviations.8
3.1 Definitions.8
3.2 Abbreviations.8
4 Detailed service description .8
4.1 Device capabilities .8
4.2 Device configuration.8
4.3 Application scenarios.8
5 Namespaces.9
6 Sequence diagrams.9
6.1 Device capability.9
6.2 Device configuration.10
7 XML Schema data type definition .11
7.1 ConfigurationDescription Structure.11
7.2 ConfigurationHistory Structure.11
7.3 DeviceCapabilities Structure.11
8 Web Service interface definition.12
8.1 Interface: DeviceCapabilities .12
8.1.1 Operation: getCapabilities .12
8.1.1.1 Input message: getCapabilitiesRequest .12
8.1.1.2 Output message: getCapabilitiesResponse.12
8.1.1.3 Referenced faults.12
8.1.2 Operation: getDeviceId.12
8.1.2.1 Input message: getDeviceIdRequest .12
8.1.2.2 Output message: getDeviceIdResponse.12
8.1.2.3 Referenced faults.13
8.2 Interface: DeviceCapabilitiesNotificationManager .13
8.2.1 Operation: startNotification.13
8.2.1.1 Input message: startNotificationRequest.13
8.2.1.2 Output message: startNotificationResponse.13
8.2.1.3 Referenced faults.13
8.2.2 Operation: endNotification.14
8.2.2.1 Input message: endNotificationRequest.14
8.2.2.2 Output message: endNotificationResponse.14
8.2.2.3 Referenced faults.14
8.3 Interface: DeviceCapabilitiesNotification .14
8.3.1 Operation: deviceNotification.14
8.3.1.1 Input message: deviceNotificationRequest.14
8.3.1.2 Output message: deviceNotificationResponse.15
8.3.2 Operation: deviceError.15
8.3.2.1 Input message: deviceErrorRequest.15
8.3.2.2 Output message: deviceErrorResponse.15
8.3.3 Operation: deviceEnd.15
8.3.3.1 Input message: deviceEndRequest.15
8.3.3.2 Output message: deviceEndResponse.15
8.4 Interface: DeviceConfiguration.15
8.4.1 Operation: pushConfiguration.15
ETSI
4 ETSI ES 202 504-18 V1.1.1 (2008-05)
8.4.1.1 Input message: pushConfigurationRequest.16
8.4.1.2 Output message: pushConfigurationResponse.16
8.4.1.3 Referenced faults.16
8.4.2 Operation getConfigurationList.16
8.4.2.1 Input message: getConfigurationListRequest.16
8.4.2.2 Output message: getConfigurationListResponse .16
8.4.2.3 Referenced faults.16
8.4.3 Operation: getConfigurationHistory.16
8.4.3.1 Input message: getConfigurationHistoryRequest.17
8.4.3.2 Output message: getConfigurationHistoryResponse.17
8.4.3.3 Referenced faults.17
9 Fault definitions.17
10 Service policies .17
Annex A (normative): WSDL for Device Capabilities and Configuration .18
Annex B (informative): Bibliography.19
History .20

ETSI
5 ETSI ES 202 504-18 V1.1.1 (2008-05)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This ETSI Standard (ES) has been produced by ETSI Technical Committee Telecommunications and Internet
converged Services and Protocols for Advanced Networking (TISPAN).
The present document is part 18 of a multi-part deliverable covering Open Service Access (OSA); Parlay X 3 Web
Services, as identified below:
Part 1: "Common";
Part 2: "Third Party Call";
Part 3: "Call Notification";
Part 4: "Short Messaging";
Part 5: "Multimedia Messaging";
Part 6: "Payment";
Part 7: "Account Management";
Part 8: "Terminal Status";
Part 9: "Terminal Location";
Part 10: "Call Handling";
Part 11: "Audio Call";
Part 12: "Multimedia Conference";
Part 13: "Address List Management";
Part 14: "Presence";
Part 15: "Message Broadcast";
Part 16: "Geocoding";
Part 17: "Application-driven Quality of Service (QoS)";
Part 18: "Device Capabilities and Configuration";
Part 19: "Multimedia Streaming Control";
Part 20: "Multimedia Multicast Session Management".
ETSI
6 ETSI ES 202 504-18 V1.1.1 (2008-05)
The present document has been defined jointly between ETSI, The Parlay Group (http://www.parlay.org) and the 3GPP.
The present document forms part of the Parlay X 3.0 set of specifications.
The present document is equivalent to 3GPP TS 29.199-18 V7.0.0 (Release 7).
ETSI
7 ETSI ES 202 504-18 V1.1.1 (2008-05)
1 Scope
The present document is part 18 of the Stage 3 Parlay X 3 Web Services specification for Open Service Access (OSA).
The OSA specifications define an architecture that enables application developers to make use of network functionality
through an open standardized interface, i.e. the OSA APIs.
The present document specifies the Device Capabilities and Configuration Web Service. The following are defined
here:
• Name spaces.
• Sequence diagrams.
• Data definitions.
• Interface specification plus detailed method descriptions.
• Fault definitions.
• Service Policies.
• WSDL Description of the interfaces.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• Non-specific reference may be made only to a complete document or a part thereof and only in the following
cases:
- if it is accepted that it will be possible to use all future changes of the referenced document for the
purposes of the referring document;
- for informative references.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
For online referenced documents, information sufficient to identify and locate the source shall be provided. Preferably,
the primary source of the referenced document should be cited, in order to ensure traceability. Furthermore, the
reference should, as far as possible, remain valid for the expected life of the document. The reference shall include the
method of access to the referenced document and the full network address, with the same punctuation and use of upper
case and lower case letters.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
2.1 Normative references
The following referenced documents are indispensable for the application of the present document. For dated
references, only the edition cited applies. For non-specific references, the latest edition of the referenced document
(including any amendments) applies.
[1] W3C Recommendation (2 May 2001): "XML Schema Part 2: Datatypes".
NOTE: Available at http://www.w3.org/TR/2001/REC-xmlschema-2-20010502/.
ETSI
8 ETSI ES 202 504-18 V1.1.1 (2008-05)
[2] ETSI ES 202 504-1: "Open Service Access (OSA); Parlay X Web Services; Part 1: Common
(Parlay X 3)".
[3] OMA Client Provisioning
...