SIST EN 13402-3:2013
(Main)Size designation of clothes - Part 3: Measurements and intervals
Size designation of clothes - Part 3: Measurements and intervals
This European Standard establishes tables for body measurements and intervals to be used for compiling standard garment sizes for men, women, boys, girls and infants. Garment dimensions are not contained in this document. Examples of labelling clothing with the standard pictogram (see EN 13402-1) are given in Annex A (informative) in this document.
Größenbezeichnung von Bekleidung - Teil 3: Maße und Sprungwerte
Dieses Dokument legt ein Körpermaßsystem fest, das zum Erstellen genormter Bekleidungsgrößen für Frauen, Männer, Kleinkinder, Jungen und Mädchen angewendet wird. Maße für Kleidungsstücke werden in diesem Dokument nicht angegeben.
Beispiele für die Etikettierung der Bekleidung mit dem Piktogramm (siehe EN 13402-1) werden im Anhang A (informativ) in diesem Dokument angegeben.
Désignation des tailles de vêtements - Partie 3: Mesures et intervalles
Le présent document établit un système de mesures du corps à utiliser pour constituer des tailles de vêtements normalisées pour femmes, hommes, enfants en bas âge, garçons et filles. Les dimensions des vêtements ne figurent pas dans ce document.
Des exemples d’étiquetage de vêtements au moyen d’un pictogramme normalisé (voir EN 13402-1) sont donnés dans l’Annexe A (informative) du présent document.
Označevanje velikosti oblačil - 3. del: Mere in koraki
Ta evropski standard uvaja preglednice za telesne mere in korake, ki se uporabljajo za izračun standardnih velikosti oblačil za moške, ženske, dečke, deklice in dojenčke. Velikosti oblačil niso navedene v tem dokumentu. Primeri za označevanje oblačil s standardnim piktogramom (glej EN 13402-1) so navedeni v dodatku A (informativni) tega dokumenta.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Größenbezeichnung von Bekleidung - Teil 3: Maße und SprungwerteDésignation des tailles de vêtements - Partie 3: Mesures et intervallesSize designation of clothes - Part 3: Measurements and intervals61.0202EODþLODClothesICS:Ta slovenski standard je istoveten z:EN 13402-3:2013SIST EN 13402-3:2013en,fr01-december-2013SIST EN 13402-3:2013SLOVENSKI
STANDARDSIST EN 13402-3:20051DGRPHãþD
SIST EN 13402-3:2013
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13402-3
October 2013 ICS 61.020 Supersedes EN 13402-3:2004English Version
Size designation of clothes - Part 3: Body measurements and intervals
Désignation des tailles de vêtements - Partie 3: Mesures et intervalles
Größenbezeichnung von Bekleidung - Teil 3: Körpermaße und Sprungwerte This European Standard was approved by CEN on 12 July 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13402-3:2013: ESIST EN 13402-3:2013
EN 13402-3:2013 (E) 2 Contents Page Foreword . 4 1 Scope . 6 2 Normative references . 6 3 Terms and definitions . 6 4 Measurements and intervals . 7 5 The letter codes . 42 Annex A (informative)
Examples of labelling clothing with the standard pictogram . 44 Bibliography . 46
Tables Table 1 — Heights for men . 7 Table 2 — Alternative of ranges for heights for men with 8 cm intervals . 7 Table 3 — Example of height range for men . 8 Table 4 — Chest and waist measurements for men – garments for upper body . 10 Table 5 — Examples for flexible use of measurements . 11 Table 6 — Neck girth and chest measurement for men – garments for upper body . 12 Table 7 — Arm length in correlation to chest and body height for men . 14 Table 8 — Waist and hip girth measurements for men – garments for lower body . 15 Table 9 — Foot lengths for socks for men . 16 Table 10 — Hand girths for gloves for men . 16 Table 11 — Head girths for headwear for men . 16 Table 12 —Heights for women . 17 Table 13 — Alternative of ranges for heights for women with 8 cm intervals. 17 Table 14 — Example of height range for women . 18 Table 15 — Bust and hip girth measurements for women – garments for upper body . 19 Table 16 — Bust and waist girth measurements for women – garments for upper body . 20 Table 17 — Waist and hip girth measurements for women – garments for lower body . 21 Table 18 — Examples for flexible use of measurements. 22 Table 19 — Examples for flexible use of measurements. 22 Table 20 — Examples for flexible use of measurements. 23 Table 21 — Ranges for bras, corsetry and swimwear with cups with intervals of 5 cm . 25 Table 22 — Waist measurements for panty girdle for women . 26 Table 23 — Foot lengths for socks for women . 26 Table 24 — Hand girths for gloves for women . 26 SIST EN 13402-3:2013
EN 13402-3:2013 (E) 3 Table 25 — Head girths for headwear for women . 27 Table 26 — Weights for pantyhose for women. 27 Table 27 — Example of height range for boys, girls and infants. 28 Table 28 — Chest related to body height – boys. 29 Table 29 — Waist related to body height – boys . 30 Table 30 — Examples for flexible use of measurements . 31 Table 31 — Neck girth and arm length in correlation to body height – boys . 32 Table 32 — Bust girth related to body height – girls . 33 Table 33 — Waist girth related to body height – girls . 34 Table 34 — Chest related to body height – infant boys . 35 Table 35 — Waist related to body height – infant boys . 36 Table 36 — Neck girth and arm length related to body height – infant boys . 37 Table 37 — Bust girth related to body height – infant girls . 38 Table 38 — Waist girth related to body height – infant girls . 39 Table 39 — Foot lengths for socks for boys, girls and infants . 40 Table 40 — Hand girths for gloves for boys, girls and infants . 41 Table 41 — Head girths for headwear for boys, girls and infants . 41 Table 42 — Letter code for men . 42 Table 43 — Letter code for women . 43
SIST EN 13402-3:2013
EN 13402-3:2013 (E) 4 Foreword This document (EN 13402-3:2013) has been prepared by Technical Committee CEN/TC 248 “Textiles and textile products”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2014, and conflicting national standards shall be withdrawn at the latest by April 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13402-3:2004. Within the revised version, the values and intervals are adjusted to current sizing surveys carried out in the Netherlands, France, Sweden, Germany and Romania.
EN 13402, Size designation of clothes, consists of the following parts: Part 1: Terms, definitions and body measurement procedure (ISO 3635:1981 modified); Part 2: Primary and secondary dimensions; Part 3: Body measurements and intervals (the present document); Part 4: Coding system1). According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
1) In preparation. SIST EN 13402-3:2013
EN 13402-3:2013 (E) 5 Introduction In order to size mass-produced clothes, the body size of the intended wearer has to be defined and identified with the nearest size on a table of standard sizes. In this system, the body size is defined by scales of the appropriate primary and, where necessary, secondary dimensions, using preferred numbers. A good degree of standardization is achieved by the establishment of open-ended size scales with fixed intervals in at least the primary dimension for each garment type. Where body shape is characterised by a number of girth dimensions and height, the primary dimension is placed on a size table, while the secondary dimensions are variables. The nearest whole number in the tables for that dimension is used for purposes of size designation. The tables of measures as described in this document constitute a first attempt at the grouping of body sizes appropriate to the European population. Body measurement tables are readily compiled from this information. It is necessary to use an open system with inbuilt flexibility, because body shape and proportions for any one population group varies. As the results of the sizing surveys of the different countries vary, the tables in this document provide the required flexibility. SIST EN 13402-3:2013
EN 13402-3:2013 (E) 6 1 Scope This European Standard establishes tables for body measurements and intervals to be used for compiling standard garment sizes for men, women, boys, girls and infants. Garment dimensions are not contained in this document. Examples of labelling clothing with the standard pictogram (see EN 13402-1) are given in Annex A (informative) in this document. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 13402-2, Size designation of clothes — Part 2: Primary and secondary dimensions 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 drop difference between chest girth and waist girth for men in centimetres, expressed with a negative value when the waist is smaller than the chest
Note 1 to entry: For a chest of 100 cm with a waist of 88 cm, the drop is -12. 3.2 primary dimension body measurement, in centimetres, that is used to designate the size of a garment for the consumer
[SOURCE: EN 13402-1:2001, 3.1, modified] 3.3 secondary dimension body measurement, in centimetres, or in the case of pantyhose, body mass (kg) that may additionally be used in designating the size of a garment for the consumer [SOURCE: EN 13402-1:2001, 3.2, modified] 3.4 cup size difference between the underbust girth and the bust girth
3.5 standard pictogram pictorial symbol used to indicate the position on the body of the relevant dimensions
[SOURCE: EN 13402-1:2001, 3.3] 3.6 interval difference between the values of two adjoining body measurements
SIST EN 13402-3:2013
EN 13402-3:2013 (E) 7 3.7 range coverage of one size, calculated by using one half plus or half minus the interval 3.8 letter code code which embraces two bust or chest sizes, i.e. two intervals 4 Measurements and intervals 4.1 Men 4.1.1 General In order to accommodate variations in height by country/company, a system with 4 cm or 8 cm intervals for men is standardized, which means that a country/company may select any height from Tables 1 and 2 with a range that may be extended to the left and right of Tables1 and 2 (see Annex A, Figure A.1).
For special kinds of clothing, e.g. protective clothing, the appropriate size should be indicated by combining several body size ranges. Table 1 — Heights for men
Dimensions in centimetres Height 156 160 164 168 172 176 180 184 188 192 196 200 204 208 Range 154 158 158 162 162 166 166 170 170 174 174 178 178 182 182 186 186 190 190 194 194 198 198 202 202 206 206 210 Intervals 4 4 4 4 4 4 4 4 4 4 4 4 4 4 Table 2 — Alternative of ranges for heights for men with 8 cm intervals Dimensions in centimetres Height 160 168 176 184 192 200 208 Range 156 164 164 172 172 180 180 188 188 196 196 204 204 212 Intervals 8 8 8 8 8 8 8 8 SIST EN 13402-3:2013
EN 13402-3:2013 (E) 8 4.1.2 Intervals Intervals listed in the tables define the differences between two adjoining body measurements.
4.1.3 Range Range is calculated by using one half plus or half minus the interval from the primary or secondary dimension measurement. If the interval is 1,5 cm or less no range will be shown in the pictogram. All ranges on the pictogram will be rounded down to whole numbers. In case of weights, the range is shown in whole numbers. EXAMPLE For a height of 156 cm the range is 154 cm to 158 cm (see Table 3).
Table 3 — Example of height range for men Height 156 Range 154 158 Interval 4 4
4.1.4 Flexible link between chest/waist and waist/hip measurements for men 4.1.4.1 General The standard sizing system allows each country/company freely to combine chest and waist measurements and waist and hip measurement according to its requirements. To attain the required flexibility, correlated to the primary measurements chest or waist, a range of alternatives are defined which are possible to combine. The alternatives are differentiated by coding with letters: Table 4 provides 14 alternatives named from C to Q (except I and O) for waist; Table 8 provides 8 alternatives named from C to K (except I and O) for waist and hip.
The alternatives could for instance be expanded to an alternative A for smaller waists/hips and from K/k to O/o for larger hips. The flexibility of the system allows by combining different hip and waist alternatives to build up the individual figure types of each country/company. It is also possible to change the alternatives between the sizes (see examples in Table 4).
During one alternative, the drop type changes, because the intervals for chest and waist are different from chest 108 cm.
4.1.4.2 Flexible use of chest-waist values for various drops Countries/companies may wish to use a choice of chest and waist girth measurements for drop type minus 12, which have the above shown choices of chest and waist (drop minus 12 cm is the difference between chest and waist). 4.1.4.3 Flexible link between waist and hip girth measurements for men For products like trousers, which cover the lower body, waist is the primary measurement and defines the size. To determine differentiations between various figure types, hip as secondary measurement is required. Table 8 contains a range of alternatives, which allows defining the whole range of individual figure types of different countries or companies.
The alternatives are to use as shown by the examples in Table 5.
SIST EN 13402-3:2013
EN 13402-3:2013 (E) 9 4.1.4.4 Flexible link between neck and chest girth measurements for men Neck is the primary measurement for men’s shirts. Table 6 shows five different alternatives for neck/chest combinations. The alternatives allow the flexible use of neck/chest combinations for each country/company. The alternatives are expandable down to alternative A and up to alternative K for instance. The principle of flexible use is the same as for choosing waist alternatives.
4.1.4.5 Alternatives of arm length in correlation to chest and body height for men Table 7 contains a range of arm lengths related to neck girth. For each neck size, 12 alternatives are available: C to O. The alternatives are expandable after the same systematic as the other measurements. The correlation to neck is static between the different sizes. Nevertheless by changing the alternative for the arm length, required flexibility is provided.
Alternative arm length relationships may be used other than those listed in Table 7.
SIST EN 13402-3:2013
EN 13402-3:2013 (E) 10 Table 4 — Chest and waist measurements for men – garments for upper body Dimensions in centimetres
Chest girth - primary dimension Mean value 76 80 84 88 92 96 100 104 108 112 116 120 124 128 132 136 Range
74 78 78 82 82 86 86 90 90 94 94 98 98 102 102 106 106 110 110 114 114 118 118 122 122 126 126 130 130 134 134 138 Intervals 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 Alternative Waist girth - primary and secondary dimension
C 58 62 66 70 74 78 82 86 91 96 101 106 111 116 121 126
Range
56 60 60 64 64 68 68 72 72 76 76 80 80 84 84 89 89 94 94 99 99 104 104 109 109 114 114 119 119 124 124 129 D 60 64 68 72 76 80 84 88 93 98 103 108 113 118 123 128
Range
58 62 62 66 66 70 70 74 74 78 78 82 82 86 86 91 91 96 96 101 101 106 106 111 111 116 116 121 121 126 126 131 E 62 66 70 74 78 82 86 90 95 100 105 110 115 120 125 130
Range
60 64 64 68 68 72 72 76 76 80 80 84 84 88 88 94 93 98 98 103 103 108 108 113 113 118 118 123 123 128 128 133 F 64 68 72 76 80 84 88 92 97 102 107 112 117 122 127 132
Range
62 66 66 70 70 74 74 78 78 82 82 86 86 90 90 95 95 100 100 105 105 110 110 115 115 120 120 125 125 130 130 135 G 66 70 74 78 82 86 90 94 99 104 109 114 119 124 129 134
Range
64 68 68 72 72 76 76 80 80 84 84 88 88 92 92 97 97 102 102 107 107 112 112 117 117 122 122 127 127 132 132 137 H 68 72 76 80 84 88 92 96 101 106 111 116 121 126 131 136
Range
66 70 70 74 74 78 78 82 82 86 86 90 90 94 94 99 99 104 104 109 109 114 114 119 119 124 124 129 129 134 134 139 J 70 74 78 82 86 90 94 98 103 108 113 118 123 128 133 138
Range
68 72 72 76 76 80 80 84 84 88 88 92 92 96 96 101 101 106 106 111 111 116 116 121 121 126 126 131 131 136 136 141 K 72 76 80 84 88 92 96 100 105 110 115 120 125 130 135 140
Range
70 74 74 78 78 82 82 86 86 90 90 94 94 98 98 103 103 108 108 113 113 118 118 123 123 128 128 133 133 138 138 143 L 74 78 82 86 90 94 98 102 107 112 117 122 127 132 137 142
Range
72 76 76 80 80 84 84 88 88 92 92 96 96 100 100 105 105 110 110 115 115 120 120 125 125 130 130 135 135 140 140 145 M 76 80 84 88 92 96 100 104 109 114 119 124 129 134 139 144
Range
74 78 78 82 82 86 86 90 90 94 94 98 98 102 102 107 107 112 112 117 117 122 122 127 127 132 132 137 137 142 142 147 N 78 82 86 90 94 98 102 106 111 116 121 126 131 136 141 146
Range
76 80 80 84 84 88 88 92 92 96 96 100 100 104 104 109 109 114 114 119 119 124 124 129 129 134 134 139 139 144 144 149 P 80 84 88 92 96 100 104 108 113 118 123 128 133 138 143 148
Range 78 82 82 86 86 90 90 94 94 98 98 102 102 106 106 111 111 116 116 121 121 126 126 131 131 136 136 141 141 146 146 151 Q 82 86 90 94 98 102 106 110 115 120 125 130 135 140 145 150
Range 80 84 84 88 88 92 92 96 96 100 100 104 104 108 108 112 112 118 118 123 123 128 128 133 133 138 138 143 143 148 148 153 R 84 88 92 96 100 104 108 112 117 122 127 132 137 142 147 152
Range 82 86 86 90 90 94 94 98 98 102 102 106 106 110 110 115 115 120 120 125 125 130 130 135 135 140 140 145 145 150 150 155 Intervals 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 SIST EN 13402-3:2013
EN 13402-3:2013 (E) 11 Table 5 — Examples for flexible use of measurements Dimensions in centimetres
Chest girth - primary dimension Mean value 76 80 84 88 92 96 100 104 108 112 116 120 124 Range
74 78 78 82 82 86 86 90 90 94 94 98 98 102 102 106 106 110 110 114 114 118 118 122 122 126 Intervals 4 4 4 4 4 4 4 4 4 4 4 4 4 4
Alternative Waist girth - primary and secondary dimension G 66 70 74 78 82 86 90 94 99 104 109 114 119
Range
64 68 68 72 72 76 76 80 80 84 84 88 88 92 92 97 97 102 102 107 107 112 112 117 117 122 Intervals 4 4 4 4 4 4 4 4 5 5 5 5 5 5 EXAMPLE 1 Choice of the alternative G for waist during the sizes drop type minus 10 for chests smaller than 108 – for chests larger than 104 the drop type changes with each size. Chest girth - primary dimension
Chest girth - primary dimension Mean value 76 80 84 88 92 96 100 104 108 Mean value 112 116 120 124 Range
74 78 78 82 82 86 86 90 90 94 94 98 98 102 102 106 106 110 Range
110 114 114 118 118 122 122 126 Intervals 4 4 4 4 4 4 4 4 4 4 Intervals 4 4 4 4 4
Alternative Waist girth - secondary dimension Alternative Waist girth - secondary dimension G 66 70 74 78 82 86 90 94 99 F 102 107 112 117
Range 64 68 68 72 72 76 76 80 80 84 84 88 88 92 92 96 96 101
Range 101 104 104 109 109 114 114 119 Intervals 4 4 4 4 4 4 4 4 5 5 Intervals 3 5 5 5 5 EXAMPLE 2 Choice of different waist alternatives during the sizes: it shows waist alternative G until chest 108 and F for larger chests. By choosing a smaller waist alternative, changing of drop type for larger chests can be reduced. SIST EN 13402-3:2013
EN 13402-3:2013 (E) 12 Table 6 — Neck girth and chest measurement for men – garments for upper body
Dimensions in centimetres
Neck girth - primary dimension Mean value 32 33 34 35 36 37 38 39 40 41
31.5 32.5 32.5 33.5 33.5 34.5 34.5 35.5 35.5 36.5 36.5 37.5 37.5 38.5 38.5 39.5 39.5 40.5 40.5 41.5 Intervals 1 1 1 1 1 1 1 1 1 1 Alternative Chest girth - secondary dimension C 68 72 76 80 92 96 100 104 108 112
Range
66 70 70 74 74 78 78 82 90 94 94 98 98 102 102 106 106 110 110 114 D 72 76 80 84 96 100 104 108 112 116
Range
70 74 74 78 78 82 82 86 94 98 98 102 102 106 106 110 110 114 114 118 E 76 80 84 88 100 104 108 112 116 120
Range
74 78 78 82 82 86 86 90 98 102 102 106 106 110 110 114 114 118 118 122 F 80 84 88 92 104 108 112 116 120 124
Range
78 82 82 86 86 90 90 94 102 106 106 110 110 114 114 118 118 122 122 126 G 84 88 92 96 108 112 116 120 124 128
Range
82 86 86 90 90 94 94 98 106 110 110 114 114 118 118 122 122 126 126 130 H 88 92 96 100 112 116 120 124 128 132
Range
86 90 90 94 94 98 98 102 110 114 114 118 118 122 122 126 126 130 130 134 Intervals 4 4 4 4 4 4 4 4 4 4
SIST EN 13402-3:2013
EN 13402-3:2013 (E) 13 Table 6 (continued)
Neck girth - primary dimension Mean value 41 42 43 44 45 46 47 48 49 50 51
40.5 41.5 41.5 42.5 42.5 43.5 43.5 44.5 44.5 45.5 45.5 46.5 46.5 47.5 47.5 48.5 48.5 49.5 49.5 50.5 50.5 51.5 Intervals 1 1 1 1 1 1 1 1 1 1 1 1
Alternative Chest girth - secondary dimension C 112 116 120 124 128 132 136 140 144 148 152
Range
110 114 114 118 118 122 122 126 126 130 130 134 134 138 138 142 142 146 146 150 150 154 D 116 120 124 128 132 136 140 144 148 152 156
Range
114 118 118 122 122 126 126 130 130 134 134 138 138 142 142 146 146 150 150 154 154 158 E 120 124 128 132 136 140 144 148 152 156 160
Range
118 122 122 126 126 130 130 134 134 138 138 142 142 146 146 150 150 154 154 158 158 162 F 124 128 132 136 140 144 148 152 156 160 164
Range
122 126 126 130 130 134 134 138 138 142 142 146 146 150 150 154 154 158 158 162 162 166 G 128 132 136 140 144 148 152 156 160 164 168
Range
126 130 130 134 134 138 138 142 142 146 146 150 150 154 154 158 158 162 162 166 166 170 H 132 136 140 144 148 152 156 160 164 168 172
Range
130 134 134 138 138 142 142 146 146 150 150 154 154 158 158 162 162 166 166 170 170 174 Intervals 4 4 4 4 4 4 4 4 4 4 4
SIST EN 13402-3:2013
EN 13402-3:2013 (E) 14 Table 7 — Arm length in correlation to chest and body height for men Dimensions in centimetres
Code F G H J K L M N P Q R S Height 156 160 164 168 172 176 180 184 188 192 196 200 Chest Alternative Arm length - secondary dimension 76 a
46,0 48,5 51,5 54,0 56,5 59,5 62,5 65,5 68,0 71,0 73,5 76,0 Range
44,75 47,25 47 50 50,25 52,75 52,75 55,25 55 58 58 61 61 64 64,25 66,75 66,5 69,5 69,75 72,25 72,25 74,75 74,75 77,25 84 b
47,0 49,5 52,5 55,0 57,5 60,5 63,5 66,5 69,0 72,0 74,5 77,0 Range
45,75 48,25 48 51 51,25 53,75 53,75 56,25 56 59 59 62 62 65 65,25 67,75 67,5 70,5 70,75 73,25 73,25 75,75 75,75 78,25 96 c
48,0 50,5 53,5 56,0 58,5 61,5 64,5 67,5 70,0 73,0 75,5 78,0 Range
46,75 49,25 49 52 52,25 54,75 54,75 57,25 57 60 60 63 63 66 66,25 68,75 68,5 71,5 71,75 74,25 74,25 76,75 76,75 79,25 108 d
49,0 51,5 54,5 57,0 59,5 62,5 65,5 68,5 71,0 74,0 76,5 79,0 Range
47,75 50,25 50 53 53,25 55,75 55,75 58,25 58 61 61 64 64 67 67,25 69,75 69,5 72,5 72,75 75,25 75,25 77,75 77,75 80,25 120 e
50,0 52,5 55,5 58,0 60,5 63,5 66,5 69,5 72,0 75,0 77,5 80,0 Range
48,75 51,25 51 54 54,25 56,75 56,75 59,25 59 62 62 65 65 68 68,25 70,75 70,5 73,5 73,75 76,25 76,25 78,75 78,75 81,25 132 f
51,0 53,5 56,5 59,0 61,5 64,5 67,5 70,5 73,0 76,0 78,5 81,0 Range
49,75 52,25 52 55 55,25 57,75 57,75 60,25 60 63 63 66 66 69 69,25 71,75 71,5 74,5 74,75 77,25 77,25 79,75 79,75 82,25
SIST EN 13402-3:2013
EN 13402-3:2013 (E) 15 Table 8 — Waist and hip girth measurements for men – garments for lower body Dimensions in centimetres
Waist girth - primary dimension Mean value 62 66 70 74 78 82 86 90 95 100 105 110 115 120 125 130 135 140 Range
60 64 64 68 68 72 72 76 76 80 80 84 84 88 88 93 93 98 98 103 103 108 108 113 113 118 118 123 123 128 128 133 133 138 138 143 Intervals 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 5 5
Alternative Hip girth - secondary dimension C 72 75 78 81 84 87 90 93 96 99 102 105 108 111 114 117 120 123
Range
71 74 74 77 77 80 80 83 83 86 86 89 89 92 92 95 95 98 98 101 101 104 104 107 107 110 110 113 113 116 116 119 119 122 122 125 D 74 77 80 83 86 89 92 95 98 101 104 107 110 113 116 119 122 125
Range
73 76 76 79 79 82 82 85 85 88 88 91 91 94 94 97 97 100 100 103 103 106 106 109 109 112 112 115 115 118 118 121 121 124 124 127 E 76 79 82 85 88 91 94 97 100 103 106 109 112 115 118 121 124 127
Range
75 78 78 81 81 84 84 87 87 90 90 93 93 96 96 99 99 102 102 105 105 108 108 111 111 114 114 117 117 120 120 123 123 126 126 129 F 78 81 84 87 90 93 96 99 102 105 108 111 114 117 120 123 126 129
Range
77 80 80 83 83 86 86 89 89 92 92 95 95 98 98 101 101 104 104 107 107 110 110 113 113 116 116 119 119 122 122 125 125 128 128 131 G 80 83 86 89 92 95 98 101 104 107 110 113 116 119 122 125 128 131
Range
79 82 82 85 85 88 88 91 91 94 94 97 97 100 100 103 103 106 106 109 109 112 112 115 115 118 118 121 121 124 124 127 127 130 130 133 H 82 85 88 91 94 97 100 103 106 109 112 115 118 121 124 127 130 133
Range
81 84 84 87 87 90 90 93 93 96 96 99 99 102 102 105 105 108 108 111 111 114 114 117 117 120 120 123 123 126 126 129 129 132 132 135 J 84 87 90 93 96 99 102 105 108 111 114 117 120 123 126 129 132 135
Range
83 86 86 89 89 92 92 95 95 98 98 101 101 104 104 107 107 110 110 113 113 116 116 119 119 122 122 125 125 128 128 131 131 134 134 137 K 86 89 92 95 98 101 104 107 110 113 116 119 122 125 128 131 134 137
Range
85 88 88 91 91 94 94 97 97 100 100 103 103 106 106 109 109 112 112 115 115 118 118 121 121 124 124 127 127 130 130 133 133 136 136 139 Intervals 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 SIST EN 13402-3:2013
EN 13402-3:2013 (E) 16 Table 9 — Foot lengths for socks for men Dimensions in centimetres Foot length 24 24,7 25,3 26 26,7 27,3 28 28,7
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.