SIST EN 50173-1:2011
(Main)Information technology - Generic cabling systems - Part 1: General requirements
Information technology - Generic cabling systems - Part 1: General requirements
This European Standard specifies: a) the structure and configuration of the backbone cabling subsystems of generic cabling systems within the types of premises defined by the other standards in the EN 50173 series; b) channel performance requirements in support of the standards in the EN 50173 series; c) link performance requirements in support of the standards in the EN 50173 series; d) backbone cabling reference implementations in support of the standards in the EN 50173 series; e) component performance requirements in support of the standards in the EN 50173 series. Safety (electrical safety and protection, optical power, fire, etc.) and electromagnetic compatibility (EMC) requirements are outside the scope of this European Standard and are covered by other standards and regulations. However, information given in this European Standard may be of assistance in meeting these standards and regulations.
Informationstechnik - Anwendungsneutrale Kommunikationskabelanlagen - Teil 1: Allgemeine Anforderungen
Technologies de l'information - Systèmes de câblage générique - Partie 1: Exigences générales
Informacijska tehnologija - Univerzalni sistemi polaganja kablov - 1. del: Splošne zahteve
Ta evropski standard določa: a) strukturo in konfiguracijo hrbteničnih podsistemov polaganja kablov v univerzalnih sistemih za polaganje kablov v tipih prostorov, ki so določeni z drugimi standardi serije EN 50173; b) delovne zahteve kanalov v podporo standardom serije EN 50173; c) delovne zahteve zvez v podporo standardom serije EN 50173; d) referenčna izvedba hrbteničnega polaganja kablov v podporo standardom serije EN 150173; e) delovne zahteve komponent v podporo standardom serije EN 50173. Varnostne zahteve (električna varnost in zaščita, optična moč, ogenj itd.) in zahteve elektromagnetne združljivosti (EMC) so zunaj področja tega evropskega standarda in so zajete z drugimi standardi in predpisi. Vendar so lahko informacije, podane v tem evropskem standardu, opora pri izpolnjevanju teh standardov in predpisov.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 50173-1:2011
01-julij-2011
1DGRPHãþD
SIST EN 50173-1:2008
Informacijska tehnologija - Univerzalni sistemi polaganja kablov - 1. del: Splošne
zahteve
Information technology - Generic cabling systems - Part 1: General requirements
Informationstechnik - Anwendungsneutrale Kommunikationskabelanlagen - Teil 1:
Allgemeine Anforderungen
Technologies de l'information - Systèmes de câblage générique - Partie 1: Exigences
générales
Ta slovenski standard je istoveten z: EN 50173-1:2011
ICS:
33.040.50 Vodi, zveze in tokokrogi Lines, connections and
circuits
35.110 Omreževanje Networking
SIST EN 50173-1:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 50173-1:2011
---------------------- Page: 2 ----------------------
SIST EN 50173-1:2011
EUROPEAN STANDARD
EN 50173-1
NORME EUROPÉENNE
May 2011
EUROPÄISCHE NORM
ICS 33.040.50
English version
Information technology -
Generic cabling systems -
Part 1: General requirements
Technologies de l'information - Informationstechnik -
Systèmes de câblage générique - Anwendungsneutrale
Partie 1: Exigences générales Kommunikationskabelanlagen -
Teil 1: Allgemeine Anforderungen
This European Standard was approved by CENELEC on 2011-04-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia,
Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50173-1:2011 E
---------------------- Page: 3 ----------------------
SIST EN 50173-1:2011
EN 50173-1:2011 – 2 –
Foreword
This European Standard was prepared by the Technical Committee CENELEC TC 215, Electrotechnical
rd
aspects of telecommunication equipment. This 3 edition of EN 50173-1 replaces the text of
EN 50173-1:2007, EN 50173-1:2007/A1:2009 and consolidates these two standards with the text of
EN 50173-1:2007/FprAB:2010 for the convenience of the user of the standard.
The text of draft amendment EN 50173-1:2007/FprAB was submitted to the Formal Vote and was approved
by CENELEC to amend EN 50173-1:2007 on 2011-04-01.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2012-04-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2014-04-01
The previous editions of European Standards EN 50173:1995 and EN 50173-1:2002 have been developed
to enable the application-independent cabling to support ICT applications in office premises. Their basic
principles, however, are applicable to other types of applications and in other types of premises.
TC 215 has decided to establish relevant European Standards which address the specific requirements of
these premises. In order to point out the commonalities of these cabling design standards, these ENs are
published as individual parts of the series EN 50173, thus also acknowledging that standards users recog-
nize the designation “EN 50173” as a synonym for generic cabling design.
At the time of publication of this European Standard, series EN 50173 comprises the following standards:
− EN 50173-1 Information technology – Generic cabling systems – Part 1: General requirements
− EN 50173-2 Information technology – Generic cabling systems – Part 2: Office premises
− EN 50173-3 Information technology – Generic cabling systems – Part 3: Industrial premises
− EN 50173-4 Information technology – Generic cabling systems – Part 4: Homes
− EN 50173-5 Information technology – Generic cabling systems – Part 5: Data centres
This edition of EN 50173-1:
a) contains a change of electromagnetic parameters in the MICE classification (Table 3);
b) introduces new component Categories 6 and 7 in accordance with the channel Classes E and F
A A A A
defined in EN 50173-1:2007/A1:2009;
c) modifies insertion loss requirements for coaxial channels;
d) modifies optical fibre Class OF-100 media and defines a new cabled optical fibre Category OM4;
e) amends and modifies connecting hardware requirements, defines both a new interface for 2 optical fibres
and for 12 and 24 fibres;
f) introduces limits for additional parameters in Annexes A, B and D.2;
g) revises D.3 regarding test requirements for mechanical and environmental performance of connecting
hardware;
h) updates Annex F “Supported applications”;
---------------------- Page: 4 ----------------------
SIST EN 50173-1:2011
– 3 – EN 50173-1:2011
i) introduces a new normative Annex I “Test procedures to assess conformance with EN 50173 standards”;
j) amends various other subclauses, tables and figures.
---------------------- Page: 5 ----------------------
SIST EN 50173-1:2011
EN 50173-1:2011 – 4 –
Contents
Introduction . 12
1 Scope and conformance . 15
1.1 Scope . 15
1.2 Conformance . 15
2 Normative references . 15
3 Terms, definitions and abbreviations . 22
3.1 Terms and definitions . 22
3.2 Abbreviations . 29
4 Structure of generic cabling . 31
4.1 General . 31
4.2 Backbone functional elements . 31
4.3 General structure and hierarchy of backbone cabling subsystems . 31
4.4 Cabling subsystems . 32
4.5 Accommodation of functional elements . 33
4.6 Equipment Interfaces and test interfaces for backbone cabling . 34
4.7 Dimensioning and configuring . 34
5 Channel performance . 35
5.1 Environmental performance . 35
5.2 Transmission performance . 38
6 Reference implementations for backbone cabling . 68
6.1 General . 68
6.2 Balanced cabling . 68
6.3 Coaxial cabling . 70
6.4 Optical fibre cabling . 70
7 Cable requirements . 71
7.1 General . 71
7.2 Operating environment . 72
7.3 Balanced cables of Categories 5, 6, 6 , 7, 7 and BCT-B . 72
A A
7.4 Other balanced cables . 74
7.5 Hybrid and multi-unit cables . 75
7.6 Coaxial cables . 76
7.7 Optical fibre cables . 77
8 Connecting hardware requirements . 80
8.1 General requirements . 80
8.2 Category 5, 6, 6 , 7, 7 and BCT-B connecting hardware for balanced cabling. 84
A A
8.3 Category CCCB connecting hardware for balanced cabling . 87
8.4 Category BCT-C connecting hardware for coaxial cabling . 89
8.5 Optical fibre connecting hardware. 91
8.6 Connecting hardware in accordance with EN 60603-7 series . 93
---------------------- Page: 6 ----------------------
SIST EN 50173-1:2011
– 5 – EN 50173-1:2011
8.7 Connecting hardware in accordance with EN 61076-3-104 . 94
8.8 Connecting hardware in accordance with EN 61076-2-101 (Type D, 4 poles) . 95
8.9 Connecting hardware for two optical fibres . 95
8.10 Connecting hardware for more than two optical fibres. 95
9 Requirements for cords and jumpers . 96
9.1 General . 96
9.2 Operating environment . 96
9.3 Balanced cords . 97
9.4 Coaxial cords . 101
9.5 Optical fibre cords . 101
Annex A (normative) Link performance limits. 104
A.1 Balanced cabling . 104
A.1.1 General . 104
A.1.2 Link limits . 105
A.2 Coaxial cabling – Insertion loss . 118
A.3 Optical fibre cabling . 119
A.3.1 All-silica optical fibre cabling . 119
A.3.2 Plastic optical fibre cabling . 119
A.3.3 Plastic clad silica optical fibre cabling . 119
Annex B (informative) Permanent link performance limits for maximum implementations (balanced
and coaxial cabling) . 120
B.1 Balanced cabling . 120
B.1.1 General . 120
B.1.2 Performance limits. 120
B.2 Coaxial cabling – Performance limits – Insertion loss. 126
Annex C Void . 127
Annex D (normative) Electrical, mechanical and environmental requirements of balanced
connecting hardware . 128
D.1 Introduction . 128
D.2 Electrical performance of Category 5, 6, 6 , 7 and 7 and BCT-B connecting hardware . 128
A A
D.2.1 Return loss . 128
D.2.2 Insertion loss . 129
D.2.3 NEXT . 129
D.2.4 PSNEXT . 130
D.2.5 FEXT . 131
D.2.6 PSFEXT . 132
D.2.7 Propagation delay . 132
D.2.8 Delay skew . 133
D.2.9 Input to output resistance . 133
D.2.10 Input to output resistance unbalance . 133
D.2.11 Current carrying capacity . 133
---------------------- Page: 7 ----------------------
SIST EN 50173-1:2011
EN 50173-1:2011 – 6 –
D.2.12 Transfer impedance . 134
D.2.13 Unbalance attenuation . 135
D.2.14 Coupling attenuation . 136
D.2.15 Insulation resistance . 137
D.2.16 Voltage proof . 137
D.2.17 Power sum alien NEXT (PSANEXT) . 138
D.3 Mechanical and environmental performance . 139
D.3.1 Introduction . 139
D.3.2 Solderless connections . 140
D.3.3 Free and fixed connectors (modular plugs and jacks) . 140
D.3.4 Other connecting hardware . 141
Annex E (informative) Electromagnetic characteristics of balanced cabling . 143
Annex F (informative) Supported applications . 144
F.1 Supported applications for balanced cabling . 144
F.2 Supported applications for coaxial cabling . 144
F.3 Supported applications for optical fibre cabling . 144
G.1 General . 152
G.2 The application of environmental classification . 152
G.2.1 MICE . 152
G.2.2 The channel environment . 152
G.2.3 Component selection . 153
G.3 The MICE system . 153
G.4 Guidance with respect to environmental classification . 159
G.4.1 Mechanical environment . 159
G.4.2 Ingress protection environment . 159
G.4.3 Climatic and chemical environment . 159
G.4.4 Electromagnetic environment . 159
Annex I (normative) Testing procedures to assess conformance with EN 50173 standards . 163
I.1 General . 163
I.2 Channel and link performance testing. 163
I.2.1 General . 163
I.2.2 Testing balanced cabling channels and links . 164
I.2.3 Testing optical fibre cabling channels and links . 164
I.2.4 Channel and link test schedules . 164
Bibliography . 167
---------------------- Page: 8 ----------------------
SIST EN 50173-1:2011
– 7 – EN 50173-1:2011
Figures
Figure 1 – Schematic relationship between the EN 50173 series and other relevant standards . 13
Figure 2 – Structure of generic cabling . 32
Figure 3 – Hierarchical structure of generic cabling . 32
Figure 4 – Interconnect and cross-connect models . 34
Figure 5 – Test and equipment interfaces for backbone cabling . 34
Figure 6 – Backbone cabling model . 69
Figure 7 – Pin grouping and pair assignments for EN 60603-7 series connecting hardware (front
view of connector) . 94
Figure 8 – Pin grouping and pair assignments for EN 61076-3-104 connecting hardware (front
view of connector) . 95
Figure 9 – Four position jack pin and pair grouping assignments for EN 61076-2-101 connecting
hardware (front view of connector). 95
Figure 10 – Optical fibre assignments for connecting hardware for two optical fibres . 95
Figure 11 – Optical fibre assignments for connecting hardware for 12 and 24 optical fibres (front
view of fixed or free connector) . 96
Figure A.1 – Link options . 104
Figure G.1 − Variation of the environment along a cabling channel . 153
Figure G.2 − The local environment . 153
Figure G.3 − Noise Ranges of Common Industrial Machine Devices . 159
Figure H.1 – Balanced cable naming schema. 161
Figure H.2 – Balanced cable construction types . 162
Tables
Table 1 – Contextual relationship between EN 50173 series and other standards relevant for
information technology cabling systems . 14
Table 2 – Channel environments . 35
Table 3 – Details of Environmental Classification . 37
Table 4 – Formulae for return loss limits for a channel . 40
Table 5 – Return loss limits for a channel at key frequencies . 41
Table 6 – Formulae for insertion loss limits for a channel . 41
Table 7 – Insertion loss limits for a channel at key frequencies . 42
Table 8 – Formulae for NEXT limits for a channel . 43
Table 9 – NEXT limits for a channel at key frequencies . 43
Table 10 – Formulae for PSNEXT limits for a channel . 44
Table 11 – PSNEXT limits for a channel at key frequencies . 44
Table 12 – ACR-N limits for a channel at key frequencies . 45
Table 13 – PSACR-N limits for a channel at key frequencies . 46
Table 14 – Formulae for ACR-F limits for a channel . 47
Table 15 – ACR-F limits for a channel at key frequencies . 47
Table 16 – Formulae for PSACR-F limits for a channel . 48
---------------------- Page: 9 ----------------------
SIST EN 50173-1:2011
EN 50173-1:2011 – 8 –
Table 17 – PSACR-F limits for a channel at key frequencies . 48
Table 18 – d.c. loop resistance limits for a channel . 49
Table 19 – d.c. loop resistance unbalance limits for a channel. 49
Table 20 – Minimum current carrying capacity. 50
Table 21 – Formulae for propagation delay limits for a channel . 51
Table 22 – Propagation delay limits for a channel at key frequencies .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.