SIST EN 3687:2012/AC:2012
(Corrigendum)Aerospace series - Bolts, normal hexagon head, relieved shank, long thread, in heat resisting steel FE-PA2601 (A286), silver plated - Classification: 1 100 MPa/650 °C
Aerospace series - Bolts, normal hexagon head, relieved shank, long thread, in heat resisting steel FE-PA2601 (A286), silver plated - Classification: 1 100 MPa/650 °C
This standard specifies the characteristics of silver-plated Bolts normal Hexagon Head with relieved shank and long thread, in heat resisting steel FE-PA92HT (A286), tensile strength class 1100 MPa at room temperature. The maximum test temperature of the material is 650 °C.
Luft- und Raumfahrt - Sechskantschrauben, Dünnschaft, langes Gewinde, aus hochwarmfesten Stahl FE-PA2601 (A286) versilbert - Klasse: 1 100 MPa/650 °C
Série aérospatiale - Vis à tête hexagonale normale, fût dégagé filetage long, en acier résistant à chaud FE-PA2601 (A286), argentées - Classification: 1 100 MPa/650 °C
Aeronavtika - Sorniki, normalna šestroba glava, tanko steblo, dolg navoj, iz toplotnoodpornega jekla FE-PA92HT (A286), posrebreni - Klasifikacija: 1100 MPa/650 °C
Ta standard določa lastnosti posrebrenih sornikov z normalno šestrobo glavo, tankim steblom, iz toplotnoodpornega jekla FE-PA92HT (A286), natezna trdnost razreda 1100 MPa pri sobni temperaturi. Največja preskusna temperatura materiala je 650 °C.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aeronavtika - Sorniki, normalna šestroba glava, tanko steblo, dolg navoj, iz toplotnoodpornega jekla FE-PA92HT (A286), posrebreni - Klasifikacija: 1100 MPa/650 °CLuft- und Raumfahrt - Sechskantschrauben, Dünnschaft, langes Gewinde, aus hochwarmfesten Stahl FE-PA2601 (A286) versilbert - Klasse: 1 100 MPa/650 °CSérie aérospatiale - Vis à tête hexagonale normale, fût dégagé filetage long, en acier résistant à chaud FE-PA2601 (A286), argentées - Classification: 1 100 MPa/650 °CAerospace series - Bolts, normal hexagon head, relieved shank, long thread, in heat resisting steel FE-PA2601 (A286), silver plated - Classification: 1 100 MPa/650 °C49.030.20Sorniki, vijaki, stebelni vijakiBolts, screws, studsICS:Ta slovenski standard je istoveten z:EN 3687:2010/AC:2011SIST EN 3687:2012/AC:2012en,fr,de01-februar-2012SIST EN 3687:2012/AC:2012SLOVENSKI
STANDARD
SIST EN 3687:2012/AC:2012
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3687:2010/AC
October 2011
Octobre 2011
Oktober 2011 ICS 49.030.20 English version Version Française Deutsche Fassung
Aerospace series - Bolts, normal hexagon head, relieved shank, long thread, in heat resisting steel FE-PA2601 (A286), silver plated - Classification: 1 100 MPa/650 °C
Série aérospatiale - Vis à tête hexagonale normale, fût dégagé filetage long, en acier résistant à chaud FE-PA2601 (A286), argentées - Classification: 1 100 MPa/650 °C
Luft- und Raumfahrt - Sechskantschrauben, Dünnschaft, langes Gewinde, aus hochwarmfesten Stahl FE-PA2601 (A286) versilbert - Klasse: 1 100 MPa/650 °C This corrigendum becomes effective on 19 October 2011 for incorporation in the three official language versions of the EN.
Ce corrigendum prendra effet le 19 octobre 2011 pour incorporation dans les trois versions linguistiques officielles de la EN.
Die Berichtigung tritt am 19. Oktober 2011 zur Einarbeitung in die drei offiziellen Sprachfassungen der EN in Kraft.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Tous droits d'exploitation sous quelque forme et de quelque manière que ce soit réservés dans le monde entier aux membres nationaux du CEN. Alle Rechte der Verwertung, gleich in welcher Form und in welchem Verfahren, sind weltweit den nationalen Mitgliedern von CEN vorbehalten. Ref. No.:EN 3687:2010/AC:2011 D/E/FSIST EN 3687:2012/AC:2012
EN 3687:2010/AC:2011 (E) 2 1 Modification to the titles In the 2nd element of the English, French and German titles, replace "FE-PA92HT" with "FE-PA2601". 2 Modification to the Scope Replace "FE-PA92HT" with "FE-PA2601" to read: "This standard specifies the characteristics of silver-plated Bolts normal Hexagon Head with relieved shank and long thread, in heat resisting steel FE-PA2601 (A286), tensile strength class 1 100 MPa at room temperature. The maximum test temperature of the material is 650 °C.". 3 Modification to Clause 2 Replace "EN 3761 1)" with "EN 3761" and delete footnote to text 1). 4 Modification to 3.3, Material Replace "FE-PA92HT" with "FE-PA2601" to read: "Heat resisting steel FE-PA2601 to EN 3761.". 5 Modification to Table 1 In column 2, 1st line, replace "Thread 1)" with "Thread a)"; delete the footnote 1) below the table and add the following as last line: " a) In conformity with ISO 5855-1 and ISO 5855-2. " to read: "
SIST EN 3687:2012/AC:2012
EN 3687:2010/AC:2011 (E) 3
Table 1
Dimensions in millimetres Diameter code Thread a) D E F G H K R S T max. min. min. min. min. max. min. max. min. max. min. max. min. tol.
050 MJ5 X 0,8 – 4H6H
4,61
4,35
8,7
7,4
7,4 0,5 0,2
3
2,7
0,5
0,3
9
7,35 h12 0,25 060 MJ6 X 1 – 4H6H
5,48
5,22 10,9
9,3
9,4
3,5
3,2
0,7
0,5
10
9,78
h13
0,3 070 MJ7 X 1 – 4H6H
6,48
6,22 12 10,2 10,3
4
3,7
11 10,73 0,35 080 MJ8 X 1 – 4H6H
7,48
7,22 14,3 12,2 12,3
0,6
0,3
4,5
4,2
13 12,73 0,4 100 MJ10 X 1,25 - 4H6H
9,32
9,06 18,9 16 16,3
5
4,7
0,8
0,6
17 16,73 0,5 120 MJ12 X 1,25 – 4H6H 11,32 11,06 21,1 18 18,3
6
5,7
0,9
19 18,67 0,6 a) In conformity with ISO 5855-1 and ISO 5855-2.
". 6 Modification to Table 1 Change the horizontal division of columns as marked in yellow below (main columns 080, 100 and 120), add W min. and Mass values for length code 044 including moving down the related value
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.