SIST EN 60317-23:2014/A1:2019

Specifications for particular types of winding wires - Part 23: Solderable polyesterimide enamelled round copper wire, class 180 (IEC 60317-23:2013/A1:2019)

This part of IEC 60317 specifies the requirements of solderable enamelled round copper winding wire of class 180 with a sole coating based on polyesterimide resin, which may be modified providing it retains the chemical identity of the original resin and meets all specified wire requirements. NOTE A modified resin is a resin that has undergone a chemical change, or contains one or more additives to enhance certain performance or application characteristics. The range of nominal conductor diameters covered by this standard is:
– Grade 1: 0,020 mm up to and including 1,600 mm;
– Grade 2: 0,020 mm up to and including 1,600 mm.
The nominal conductor diameters are specified in Clause 4 of IEC 60317-0-1:2013.

Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 23: Runddrähte aus Kupfer, verzinnbar, lackisoliert mit Polyesterimid, Klasse 180 (IEC 60317-23:2013/A1:2019)

Spécifications pour types particuliers de fils de bobinage - Partie 23: Fil brasable de section circulaire en cuivre émaillé avec polyesterimide, classe 180 (IEC 60317-23:2013/A1:2019)

Specifikacije za posebne vrste navijalnih žic - 23. del: Spajkljiva okrogla bakrena žica, prevlečena s poliesterimidom, razred 180 - Dopolnilo A1 (IEC 60317-23:2013/A1:2019)

General Information

• Status: Published
• Publication Date: 03-Oct-2019
• ICS: 29.060.10 - Wires
• ICS: 77.150.30 - Copper products
• Technical Committee: I09 - Imaginarni 09
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Oct-2019
• Due Date: 06-Dec-2019
• Completion Date: 04-Oct-2019
• Ref Project: EN 60317-23:2014/A1:2019 - Specifications for particular types of winding wires - Part 23: Solderable polyesterimide enamelled round copper wire, class 180

Relations

• Amends: SIST EN 60317-23:2014 - Specifications for particular types of winding wires - Part 23: Solderable polyesterimide enamelled round copper wire, class 180
• Effective Date: 07-Aug-2018

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60317-23:2014/A1:2019
01-december-2019
Specifikacije za posebne vrste navijalnih žic - 23. del: Spajkljiva okrogla bakrena
žica, prevlečena s poliesterimidom, razred 180 - Dopolnilo A1 (IEC 60317-
23:2013/A1:2019)
Specifications for particular types of winding wires - Part 23: Solderable polyesterimide
enamelled round copper wire, class 180 (IEC 60317-23:2013/A1:2019)
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 23:
Runddrähte aus Kupfer, verzinnbar, lackisoliert mit Polyesterimid, Klasse 180 (IEC
60317-23:2013/A1:2019)
Spécifications pour types particuliers de fils de bobinage - Partie 23: Fil brasable de
section circulaire en cuivre émaillé avec polyesterimide, classe 180 (IEC 60317-
23:2013/A1:2019)
Ta slovenski standard je istoveten z: EN 60317-23:2014/A1:2019
ICS:
29.060.10 Žice Wires
77.150.30 Bakreni izdelki Copper products
SIST EN 60317-23:2014/A1:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 60317-23:2014/A1:2019

---------------------- Page: 2 ----------------------
SIST EN 60317-23:2014/A1:2019


EUROPEAN STANDARD EN 60317-23:2014/A1

NORME EUROPÉENNE

EUROPÄISCHE NORM
September 2019
ICS 29.060.10

English Version
Specifications for particular types of winding wires - Part 23:
Solderable polyesterimide enamelled round copper wire, class 180
(IEC 60317-23:2013/A1:2019)
Spécifications pour types particuliers de fils de bobinage - Technische Lieferbedingungen für bestimmte Typen von
Partie 23: Fil brasable de section circulaire en cuivre Wickeldrähten - Teil 23: Runddrähte aus Kupfer,
émaillé avec polyestérimide, classe 180 verzinnbar, lackisoliert mit Polyesterimid, Klasse 180
(IEC 60317-23:2013/A1:2019) (IEC 60317-23:2013/A1:2019)
This amendment A1 modifies the European Standard EN 60317-23:2014; it was approved by CENELEC on 2019-07-17. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 60317-23:2014/A1:2019 E

---------------------- Page: 3 ----------------------
SIST EN 60317-23:2014/A1
...