oSIST prEN 4913:2025
(Main)Aerospace series - Use of regrinds and recycled materials in thermoplastic parts
Aerospace series - Use of regrinds and recycled materials in thermoplastic parts
This document provides guidance for the use of regrinds and recycled materials for thermoplastic parts for aerospace applications.
The purpose of this document is to specify design and quality requirements. It does not specify process instructions or specific material requirements; these are specified in the processors process instructions and applicable material specifications.
Luft- und Raumfahrt - Nutzung von Regranulaten und rezyklierten Materialien in thermoplastischen Bauteilen
Série aérospatiale - Usage des matériaux regranulés et recyclés dans éléments thermoplastiques
Aeronavtika - Uporaba regranulatov in recikliranih materialov v termoplastičnih komponentah
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2025
Aeronavtika - Uporaba regranulatov in recikliranih materialov v termoplastičnih
komponentah
Aerospace series - Use of regrinds and recycled materials in thermoplastic parts
Luft- und Raumfahrt - Nutzung von Regranulaten und rezyklierten Materialien in
thermoplastischen Bauteilen
Série aérospatiale - Usage des matériaux regranulés et recyclés dans éléments
thermoplastiques
Ta slovenski standard je istoveten z: prEN 4913
ICS:
49.025.40 Guma in polimerni materiali Rubber and plastics
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2024
ICS 49.025.40
English Version
Aerospace series - Use of regrinds and recycled materials
in thermoplastic parts
Série aérospatiale - Usage des matériaux regranulés et Luft- und Raumfahrt - Nutzung von Regranulaten und
recyclés dans éléments thermoplastiques rezyklierten Materialien in thermoplastischen
Bauteilen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4913:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Regrind . 4
5 Recycled plastic . 5
European foreword
This document (prEN 4913:2024) has been
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.