SIST EN IEC 62769-101-1:2021

Field device Integration (FDI) - Part 101-1: Profiles - Foundation Fieldbus H1 (IEC 62769-101-1:2020)

IEC 62769-101-1:2020 is available as IEC 62769-101-1:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

IEC 62769-101-1:2020 specifies the IEC 62769 profile for IEC 61784 1_CP 1/1 (FOUNDATION™ Fieldbus H1) .

Feldgeräteintegration (FDI) - Teil 101-1: Profile - Foundation Fieldbus H1 (IEC 62769-101-1:2020)

Intégration des appareils de terrain (FDI) - Partie 101-1: Profils - Foundation Fieldbus H1 (IEC 62769-101-1:2020)

IEC 62769-101-1:2020 est disponible sous forme de IEC 62769-101-1:2020 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.

L’IEC 62769-101-1:2020 spécifie le profil de l'IEC 62769 pour le profil de communication CP 1/1 (FOUNDATION™ Fieldbus H1) défini dans l'IEC 61784-1.

Integracija procesne naprave (FDI) - 101-1. del: Profili - Osnovno procesno vodilo H1 (IEC 62769-101-1:2020)

General Information

• Status: Published
• Public Enquiry End Date: 23-Dec-2018
• Publication Date: 03-Mar-2021
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.240.50 - IT applications in industry
• Technical Committee: MOV - Measuring equipment for electromagnetic quantities
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 12-Jan-2021
• Due Date: 19-Mar-2021
• Completion Date: 04-Mar-2021
• Ref Project: EN IEC 62769-101-1:2021 - Field device Integration (FDI) - Part 101-1: Profiles - Foundation Fieldbus H1

Relations

• Replaces: SIST EN 62769-101-1:2015 - Field Device Integration (FDI) - Part 101-1: Profiles - Foundation Fieldbus H1 (IEC 62769-101-1:2015)
• Effective Date: 12-Jan-2021
• Revised: SIST EN IEC 62769-101-1:2023 - Field device Integration (FDI)® - Part 101-1: Profiles - Foundation Fieldbus H1 (IEC 62769-101-1:2023)
• Effective Date: 09-Nov-2021
• Replaces: SIST EN 62769-101-1:2015 - Field Device Integration (FDI) - Part 101-1: Profiles - Foundation Fieldbus H1 (IEC 62769-101-1:2015)
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62769-101-1:2021
01-april-2021
Nadomešča:
SIST EN 62769-101-1:2015
Integracija procesne naprave (FDI) - 101-1. del: Profili - Osnovno procesno vodilo
H1 (IEC 62769-101-1:2020)
Field device Integration (FDI) - Part 101-1: Profiles - Foundation Fieldbus H1 (IEC 62769
-101-1:2020)
Feldgeräteintegration (FDI) - Teil 101-1: Profile - Foundation Fieldbus H1 (IEC 62769-
101-1:2020)
Intégration des appareils de terrain (FDI) - Partie 101-1: Profils - Foundation Fieldbus H1
(IEC 62769-101-1:2020)
Ta slovenski standard je istoveten z: EN IEC 62769-101-1:2021
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
SIST EN IEC 62769-101-1:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 62769-101-1:2021

---------------------- Page: 2 ----------------------
SIST EN IEC 62769-101-1:2021


EUROPEAN STANDARD EN IEC 62769-101-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
January 2021
ICS 25.040.40; 35.100.05 Supersedes EN 62769-101-1:2015 and all of its
amendments and corrigenda (if any)
English Version
Field device Integration (FDI) - Part 101-1: Profiles - Foundation
Fieldbus H1
(IEC 62769-101-1:2020)
Intégration des appareils de terrain (FDI) - Partie 101-1: Feldgeräteintegration (FDI) - Teil 101-1: Profile -
Profils - Foundation Fieldbus H1 Foundation Fieldbus H1
(IEC 62769-101-1:2020) (IEC 62769-101-1:2020)
This European Standard was approved by CENELEC on 2020-12-24. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62769-101-1:2021 E

---------------------- Page: 3 ----------------------
SIST EN IEC 62769-101-1:2021
EN IEC 62769-101-1:2021 (E)
European foreword
The text of document 65E/620/CDV, future edition 2 of IEC 62769-101-1, prepared by SC 65E
"Devices and integration in enterprise systems" of IEC/TC 65 "Industrial-process measurement,
control and automation" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 62769-101-1:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-09-24
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-12-24
document have to be withdrawn
This document supersedes EN 62769-101-1:2015 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 62769-101-1:2020 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 62769-3 NOTE Harmonized as EN 62769-3
2

---------------------- Page: 4 ----------------------
SIST EN IEC 62769-101-1:2021
EN IEC 62769-101-1:2021 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 61158-5-9 2014 Industrial communication networks - EN 61158-5-9 2014
Fieldbus specifications - Part 5-9:
Application layer service definition - Type 9
elements
IEC 61784-1 - Industrial communication networks - EN IEC 61784-1 -
Profiles Part 1: Fieldbus profiles
IEC 61784-2 - Industrial communication networks - EN IEC 61784-2 -
Profiles - Part 2: Additional fieldbus profiles
for real-time networks based on
ISO/IEC/IEEE 8802-3
IEC 61784-3 2016 Industrial communication networks - EN 61784-3 2016
Profiles - Part 3: Functional safety
fieldbuses - General rules and profile
definitions
IEC 61804 series Devices and integration in enterprise EN IEC 61804 series
systems - Function blocks (FB) for process
control and electronic device description
language (EDDL)
IEC 62541-6 - OPC Unified Architecture - Part 6: EN IEC 62541-6 -
Mappings
IEC 62541-100 2015 OPC Unified Architecture - Part 100: EN 62541-100 2015
Device Interface
IEC 62769-1 - Field device integration (FDI) - Part 1: EN 62769-1 -
Overview
IEC 62769-2 - Field Device Integration (FDI) - Part 2: FDI EN 62769-2 -
Client
3

---------------------- Page: 5 ----------------------
SIST EN IEC 62769-101-1:2021
EN IEC 62769-101-1:2021 (E)
Publication Year Title EN/HD Year
IEC 62769-4 - Field Device Integration (FDI) - Part 4: FDI EN 62769-4 -
Packages
IEC 62769-5 - Field Device Integration (FDI) - Part 5: FDI EN 62769-5 -
Information Model
IEC 62769-6 - Field Device Integration (FDI) - Part 6: FDI EN 62769-6 -
Technology Mapping
IEC 62769-7 - Field Device Integration (FDI) - Part 7: FDI EN 62769-7 -
Communication Devices

4

---------------------- Page: 6 ----------------------
SIST EN IEC 62769-101-1:2021



IEC 62769-101-1

®


Edition 2.0 2020-11




INTERNATIONAL



STANDARD




NORME


INTERNATIONALE











Field device integration (FDI) –

Part 101-1: Profiles – Foundation Fieldbus H1



Intégration des appareils de terrain (FDI) –

Partie 101-1: Profils – Foundation Fieldbus H1
















INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 25.040.40; 35.100.05 ISBN 978-2-8322-9065-1




Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------
SIST EN IEC 62769-101-1:2021
– 2 – IEC 62769-101-1:2020 © IEC 2020
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Terms, definitions, abbreviated terms and conventions . 7
3.1 Terms and definitions . 7
3.2 Abbreviated terms . 7
3.3 Conventions . 7
3.3.1 EDDL syntax. 7
3.3.2 XML syntax . 7
3.3.3 Capitalizations . 7
4 Profile for CP 1/1 (FOUNDATION™ H1) . 8
4.1 General . 8
4.2 Catalog profile . 8
4.2.1 Protocol support file . 8
4.2.2 CommunicationProfile definition . 8
4.2.3 Profile device . 8
4.2.4 Protocol version information . 8
4.3 Associating a Package with a CP 1/1 device . 9
4.3.1 Device type identification mapping . 9
4.3.2 Device type revision mapping . 9
4.4 Information Model mapping . 9
4.4.1 ProtocolType definition . 9
4.4.2 DeviceType mapping . 9
4.4.3 FunctionalGroup Identification definition . 10
4.4.4 BlockType property mapping . 10
4.4.5 Mapping to Block ParameterSet . 11
4.5 Topology elements . 11
4.5.1 ConnectionPoint definition . 11
4.5.2 Communication Device definition . 13
4.5.3 Communication service provider definition . 14
4.5.4 Network definition . 15
4.6 Methods . 16
4.6.1 Methods for FDI Communication Servers . 16
4.6.2 Methods for Gateways . 21
Annex A (normative) Topology scan schema . 22
A.1 General . 22
A.2 FoundationH1AddressT . 22
A.3 FoundationH1ConnectionPointT . 22
A.4 FoundationH1NetworkT . 23
A.5 Network . 23
A.6 FoundationBlockIdentificationT . 24
A.7 FoundationIdentificationT . 24
Annex B (normative) Transfer service parameters . 26
B.1 General . 26
B.2 receiveData . 26
B.3 sendData . 26

---------------------- Page: 8 ----------------------
SIST EN IEC 62769-101-1:2021
IEC 62769-101-1:2020 © IEC 2020 – 3 –
B.4 OperationT . 27
B.5 ResponseCodeT . 27
B.6 TransferResultDataT . 27
B.7 TransferSendDataT . 28
Annex C (informative) Communication service arguments for Transfer Method . 29
Bibliography . 30

Table 1 – Capability File part . 8
Table 2 – CommunicationProfile definition . 8
Table 3 – Device type catalog mapping . 9
Table 4 – ProtocolType Foundation_H1 definition . 9
Table 5 – Inherited DeviceType Property mapping . 10
Table 6 – Identification Parameters . 10
Table 7 – Inherited BlockType property mapping. 11
Table 8 – ConnectionPointType ConnectionPoint_Foundation_H1 definition . 11
Table 9 – Communication device ParameterSet definition . 14
Table 10 – Method Connect arguments . 16
Table 11 – Method Disconnect arguments . 17
Table 12 – Method Transfer arguments . 18
Table 13 – Method GetPublishedData arguments. 19
Table 14 – Method SetAddress arguments . 21
Table A.1 – Attributes of FoundationH1ConnectionPointT . 23
Table A.2 – Elements of FoundationH1ConnectionPointT . 23
Table A.3 – Elements of FoundationH1NetworkT . 23
Table A.4 – Attributes of FoundationBlockIdentificationT. 24
Table A.5 – Attributes of FoundationIdentificationT . 25
Table B.1 – Elements of receiveData . 26
Table B.2 – Enumerations of OperationT . 27
Table B.3 – Attributes of ResponseCodeT . 27
Table B.4 – Attributes of TransferResultDataT . 28
Table B.5 – Attributes of TransferSendDataT . 28

---------------------- Page: 9 ----------------------
SIST EN IEC 62769-101-1:2021
– 4 – IEC 62769-101-1:2020 © IEC 2020
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

FIELD DEVICE INTEGRATION (FDI) –

Part 101-1: Profiles – Foundation Fieldbus H1

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62769-101-1 has been prepared by subcommittee 65E: Devices
and integration in enterprise systems, of IEC technical committee 65: Industrial-process
measurement, control and automation.
This second edition cancels and replaces the first edition published in 2015. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) support for generic protocol extension for faster adoption of other technologies;
b) support for Package developers to build EDDs targeted for today's EDD bases system
under a single development tool.

---------------------- Page: 10 ----------------------
SIST EN IEC 62769-101-1:2021
IEC 62769-101-1:2020 © IEC 2020 – 5 –
The text of this International Standard is based on the following documents:
CDV Report on voting
65E/620/CDV 65E/683/RVC

Full information on the voting for the approval of this International Standard can be found in
the report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts in the IEC 62769 series, published under the general title Field device
integration (FDI), can be found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

---------------------- Page: 11 ----------------------
SIST EN IEC 62769-101-1:2021
– 6 – IEC 62769-101-1:2020 © IEC 2020
FIELD DEVICE INTEGRATION (FDI) –

Part 101-1: Profiles – Foundation Fieldbus H1



1 Scope
This part of IEC 62769 specifies the IEC 62769 profile for IEC 61784-1_CP 1/1
1
(FOUNDATION™ Fieldbus H1) .
2 Normative references
The following documents are referred to in the text in such a way that some or all of their
content constitutes requirements of this document. For dated references, only the edition
cited applies. For undated references, the latest edition of the referenced document (including
any amendments) applies.
IEC 61158-5-9:2014, Industrial communication networks – Fieldbus specifications – Part 5-9:
Application layer service definition – Type 9 elements
IEC 61784-1, Industrial communication networks – Profiles – Part 1: Fieldbus Profiles
IEC 61784-2, Industrial communication networks – Profiles – Part 2: Additional fieldbus
profiles for real-time networks based on ISO/IEC/IEEE 8802-3
IEC 61784-3:2016, Industrial communication networks – Profiles – Part 3: Functional safety
fieldbuses – General rules and profile definitions
IEC 61804 (all parts), Function blocks (FB) for process control and electronic device
description language (EDDL)
IEC 62541-6, OPC unified architecture – Part 6: Mappings
IEC 62541-100:2015, OPC unified architecture – Part 100: Device Interface
IEC 62769-1, Field device integration (FDI) – Part 1: Overview
IEC 62769-2, Field Device Integration (FDI) – Part 2: FDI Client
IEC 62769-4, Field Device Integration (FDI) – Part 4: FDI Packages
IEC 62769-5, Field Device Integration (FDI) – Part 5: FDI Information Model
IEC 62769-6, Field Device Integration (FDI) – Part 6: FDI Technology Mapping
IEC 62769-7, Field Device Integration (FDI) – Part 7: FDI Communication Devices
___________
1
FOUNDATION™ Fieldbus is the trade name of the non-profit consortium Fieldbus Foundation. This information is
given for the convenience of users of this document and does not constitute an endorsement by IEC of the
trademark holder or any of its products. Compliance does not require use of the trade name. Use of the trade
name requires permission of the trade name holder.

---------------------- Page: 12 ----------------------
SIST EN IEC 62769-101-1:2021
IEC 62769-101-1:2020 © IEC 2020 – 7 –
3 Terms, definitions, abbreviated terms and conventions
3.1 Terms and definitions
For the purposes of this document, the terms and definitions given in IEC 61158-5-9,
IEC 61784-1, IEC 61784-2, IEC 61784-3, IEC 61804 (all parts), IEC 62541-6, IEC 62541-100,
IEC 62769-1, IEC 62769-2, IEC 62769-4, IEC 62769-5, IEC 62769-6, and IEC 62769-7 apply.
ISO and IEC maintain terminological databases for use in standardization at the following
addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
3.2 Abbreviated terms
For the purposes of this document, the following abbreviated terms apply:
CFF common file format
CP communication profile (see IEC 61784-1 or IEC 61784-2)
CPF communication profile family (see IEC 61784-1 or IEC 61784-2)
EDD Electronic Device Description (see IEC 61804 (all parts))
FB Function Block
IM Information Model
SMIB System Management Information Base
VFD virtual field device
3.3 Conventions
3.3.1 EDDL syntax
This document specifies content for the EDD component that is part of an FDI Communication
Package. EDDL syntax uses the font Courier New. EDDL syntax is used for method signature,
variable, data structure and component declarations.
3.3.2 XML syntax
XML syntax examples use the font Courier New. The XML syntax is used to describe XML
document schema.
Example
3.3.3 Capitalizations
The IEC 62769 series uses capitalized terms to emphasize that these terms have an FDI
specific meaning.
Some of these terms use an acronym as a prefix for example:
• FDI Client, or
• FDI Server.
Some of these terms are compound terms such as:
• Communication Servers, or
• Profile Package.

---------------------- Page: 13 ----------------------
SIST EN IEC 62769-101-1:2021
– 8 – IEC 62769-101-1:2020 © IEC 2020
Parameter names or attributes are concatenated to a single term, where the original terms
start in this term with a capital letter such as:
• ProtocolSupportFile, or
• ProtocolType.
Parameter names or attributes can also be constructed by using an underscore character to
concatenate two or more terms such as:
• PROFILE_ID, or
• Profibus_PA_Network.
4 Profile for CP 1/1 (FOUNDATION™ H1)
4.1 General
This profile specifies the protocol specifics needed for FDI Packages describing
Communication Servers, gateways and devices. Requirements for Direct Access transfer
service parameters are given in Annex B.
4.2 Catalog profile
4.2.1 Protocol support file
Each CP 1/1 FDI Device Package shall contain a capability file. The capability file part is
described in Table 1.
Table 1 – Capability File part
Parameter Description
Content Type: txt/plain
Root Namespace: Not applicable
Source Relationship: http://fdi-cooperation.com/2010/relationships/attachment-protocol
Filename: Use file extension .CFF

4.2.2 CommunicationProfile definition
IEC 62769-4 defines a CommunicationProfileT string type for the Catalog XML schema. Table
2 defines the CP 1/1 specific values for this string.
Table 2 – CommunicationProfile definition
CommunicationProfile Description
foundation_h1 CP 1/1 device type with a Function Block application

4.2.3 Profile device
Not supported in this document.
4.2.4 Protocol version information
IEC 62769-4 defines an element type named InterfaceT for the Catalog XML Schema.
Element type InterfaceT contains an element named Version which is supposed to provide
version information about the applied communication protocol profile. The value follows the
IEC 62769-4 defined version information schema defined in element type VersionT.

---------------------- Page: 14 ----------------------
SIST EN IEC 62769-101-1:2021
IEC 62769-101-1:2020 © IEC 2020 – 9 –
The major version part of VersionT shall be set to the ITK_VER parameter. The minor and
builds parts shall be set to 0.
EXAMPLE For ITK_VER 5, the value for InterfaceT is 5.0.0.
4.3 Associating a Package with a CP 1/1 device
4.3.1 Device type identification mapping
CP 1/1 device types are uniquely identified by the parameters MANUFAC_ID, DEVICE_TYPE
and DEV_REV found in the Resource Block. These parameters are used to associate a given
device instance to an FDI Device Package. These parameters are mapped to the FDI Device
Package Catalog according to Table 3.
Table 3 – Device type catalog mapping
Catalog Element CP Mapping
Manufacturer element of InterfaceT (IEC 62769-4) MANUFAC_ID
String format "0xdddd" where dddd is the
MANUFAC_ID number in hexadecimal format.
DeviceModel element of InterfaceT (IEC 62769-4) DEVICE_TYPE
String format "0xdddd" where dddd is the
DEVICE_TYPE number in hexadecimal format.
DeviceRevision element DEV_REV
ListOfSupportedDeviceRevisionsT (IEC 62769-4)
String format "x.0.0" where x is the DEV_REV in
decimal format (no leading zeros).

4.3.2 Device type revision mapping
Each device type is identified according to 4.3.1. A device may also include a parameter
COMPATIBILITY_REV from the Resource Block. This parameter
...

SLOVENSKI STANDARD
oSIST prEN IEC 62769-101-1:2018
01-december-2018
9NOMXþLWHYSURFHVQHQDSUDYH)',GHO3URILOL3URFHVQRYRGLORVNODGD+
Field device Integration (FDI) - Part 101-1: Profiles - Foundation Fieldbus H1
Intégration des appareils de terrain (FDI) - Partie 101-1: Profils - Foundation Fieldbus H1
Ta slovenski standard je istoveten z: prEN IEC 62769-101-1:2018
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
oSIST prEN IEC 62769-101-1:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 62769-101-1:2018

---------------------- Page: 2 ----------------------
oSIST prEN IEC 62769-101-1:2018
65E/620/CDV

COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 62769-101-1 ED2
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2018-10-05 2018-12-28
SUPERSEDES DOCUMENTS:
65E/539/RR

IEC SC 65E : DEVICES AND INTEGRATION IN ENTERPRISE SYSTEMS
SECRETARIAT: SECRETARY:
United States of America Mr Donald (Bob) Lattimer
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:


Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:

EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.

TITLE:
Field device Integration (FDI) - Part 101-1: Profiles - Foundation Fieldbus H1

PROPOSED STABILITY DATE: 2023

NOTE FROM TC/SC OFFICERS:


Copyright © 2018 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.

---------------------- Page: 3 ----------------------
oSIST prEN IEC 62769-101-1:2018
IEC CDV 62769-101-1 © IEC 2018 – 2 – 65E/620/CDV
CONTENTS

FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Terms, definitions, abbreviated terms and conventions . 6
3.1 Terms and definitions . 6
3.2 Abbreviated terms . 7
3.3 Conventions . 7
3.3.1 EDDL syntax . 7
3.3.2 XML syntax . 7
3.3.3 Capitalizations . 7
4 Profile for CP 1/1 (FOUNDATION™ H1) . 8
4.1 General . 8
4.2 Catalog profile . 8
4.2.1 Protocol support file . 8
4.2.2 CommunicationProfile definition . 8
4.2.3 Profile device . 8
4.2.4 Protocol version information . 8
4.3 Associating a Package with a CP 1/1 device . 9
4.3.1 Device type identification mapping . 9
4.3.2 Device type revision mapping . 9
4.4 Information Model mapping . 9
4.4.1 ProtocolType definition . 9
4.4.2 DeviceType mapping . 9
4.4.3 FunctionalGroup Identification definition . 10
4.4.4 BlockType property mapping . 10
4.4.5 Mapping to Block ParameterSet . 10
4.5 Topology elements . 11
4.5.1 ConnectionPoint definition . 11
4.5.2 Communication Device definition . 12
4.5.3 Communication service provider definition. 14
4.5.4 Network definition . 15
4.6 Methods . 16
4.6.1 Methods for FDI Communication Servers . 16
4.6.2 Methods for Gateways . 22
Annex A (normative) Topology scan schema . 23
A.1 General . 23
A.2 FoundationH1AddressT . 23
A.3 FoundationH1ConnectionPointT . 23
A.4 FoundationH1NetworkT . 24
A.5 Network . 24
A.6 FoundationBlockIdentificationT . 24

---------------------- Page: 4 ----------------------
oSIST prEN IEC 62769-101-1:2018
65E/620/CDV – 3 – IEC CDV 62769-101-1 © IEC 2018
A.7 FoundationIdentificationT . 25
Annex B (normative) Transfer service parameters . 27
B.1 General . 27
B.2 receiveData . 27
B.3 sendData . 27
B.4 OperationT . 28
B.5 ResponseCodeT . 28
B.6 TransferResultDataT . 28
B.7 TransferSendDataT . 29
Annex C (informative)  Communication service arguments for Transfer Method . 30
Bibliography . 31

Table 1 – Capability File part . 8
Table 2 – CommunicationProfile definition . 8
Table 3 – Device type catalog mapping . 9
Table 4 – ProtocolType Foundation_H1 definition . 9
Table 5 – Inherited DeviceType Property mapping . 9
Table 6 – Identification Parameters . 10
Table 7 – Inherited BlockType property mapping . 10
Table 8 – ConnectionPointType ConnectionPoint_Foundation_H1 definition . 11
Table 9 – Communication device ParameterSet definition . 14
Table 10 – Method Connect arguments . 16
Table 11 – Method Disconnect arguments . 17
Table 12 – Method Transfer arguments . 18
Table 13 – Method GetPublishedData arguments . 19
Table 14 – Method SetAddress arguments . 21
Table A.1 – Attributes of FoundationH1ConnectionPointT . 23
Table A.2 – Elements of FoundationH1ConnectionPointT . 24
Table A.3 – Elements of FoundationH1NetworkT . 24
Table A.4 – Attributes of FoundationBlockIdentificationT . 25
Table A.5 – Attributes of FoundationIdentificationT . 25
Table 1 – Elements of receiveData . 27
Table 2 – Enumerations of OperationT . 28
Table 3 – Attributes of ResponseCodeT . 28
Table 4 – Attributes of TransferResultDataT . 29
Table 5 – Attributes of TransferSendDataT . 29

---------------------- Page: 5 ----------------------
oSIST prEN IEC 62769-101-1:2018
IEC CDV 62769-101-1 © IEC 2018 – 4 – 65E/620/CDV
1 INTERNATIONAL ELECTROTECHNICAL COMMISSION
2 ____________
3
4 FIELD DEVICE INTEGRATION (FDI) –
5
6 Part 101-1: Profiles – Foundation Fieldbus H1
7
8 FOREWORD
9 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all
10 national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-
11 operation on all questions concerning standardization in the electrical and electronic fields. To this end and in
12 addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
13 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation
14 is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
15 participate in this preparatory work. International, governmental and non-governmental organizations liaising with
16 the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
17 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
18 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
19 consensus of opinion on the relevant subjects since each technical committee has representation from all
20 interested IEC National Committees.
21 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
22 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
23 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
24 misinterpretation by any end user.
25 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
26 transparently to the maximum extent possible in their national and regional publications. Any divergence between
27 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
28 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
29 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
30 services carried out by independent certification bodies.
31 6) All users should ensure that they have the latest edition of this publication.
32 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
33 members of its technical committees and IEC National Committees for any personal injury, property damage or
34 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses
35 arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
36 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
37 indispensable for the correct application of this publication.
38 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
39 rights. IEC shall not be held responsible for identifying any or all such patent rights.
40 International Standard IEC 62769-101-1 has been prepared by subcommittee 65E: Devices and
41 integration in enterprise systems, of IEC technical committee 65: Industrial-process
42 measurement, control and automation.
43 This second edition cancels and replaces the first edition published in 2015. This edition
44 constitutes a technical revision.
45 This edition includes the following significant technical changes with respect to the previous
46 edition:
47 a) support for generic protocol extension for faster adoption of other technologies;
48 b) support for Package Developers to build EDDs targeted for today’s EDD bases system under
49 a single development tool;
50 The text of this International Standard is based on the following documents:

---------------------- Page: 6 ----------------------
oSIST prEN IEC 62769-101-1:2018
65E/620/CDV – 5 – IEC CDV 62769-101-1 © IEC 2018
FDIS Report on voting
65E/XX/FDIS 65E/XX/RVD
51
52 Full information on the voting for the approval of this International Standard can be found in the
53 report on voting indicated in the above table.
54 This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
55 A list of all parts in the IEC 62769 series, published under the general title Field Device
56 Integration (FDI), can be found on the IEC website.
57 The committee has decided that the contents of this document will remain unchanged until the
58 stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
59 the specific document. At this date, the document will be
60 • reconfirmed,
61 • withdrawn,
62 • replaced by a revised edition, or
63 • amended.
64
65 The National Committees are requested to note that for this document the stability date
66 is 2023
67 THIS TEXT IS INCLUDED FOR THE INFORMATION OF THE NATIONAL COMMITTEES AND WILL BE DELETED
68 AT THE PUBLICATION STAGE.
69
70
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.
71
72

---------------------- Page: 7 ----------------------
oSIST prEN IEC 62769-101-1:2018
IEC CDV 62769-101-1 © IEC 2018 – 6 – 65E/620/CDV
73 FIELD DEVICE INTEGRATION (FDI) –
74
75 Part 101-1: Profiles – Foundation Fieldbus H1
76 1 Scope
77 This part of IEC 62769 specifies an FDI profile of IEC 62769 for IEC 61784-1_CP 1/1
1
78 (FOUNDATION™ Fieldbus H1) .
79 2 Normative references
80 The following documents are referred to in the text in such a way that some or all of their content
81 constitutes requirements of this document. For dated references, only the edition cited applies.
82 For undated references, the latest edition of the referenced document (including any
83 amendments) applies.
84 IEC 61158-5-9:2007, Industrial communication networks - Fieldbus specifications – Part 5-9:
85 Application layer service definition – Type 9 elements
86 IEC 61784-1, Industrial communication networks—Profiles—Part 1: Fieldbus Profiles
87 IEC 61784-2, Industrial communication networks – Profiles – Part 2: Additional fieldbus profiles
88 for real-time networks based on ISO/IEC 8802-3
89 IEC 61784-3:2010, Industrial communication networks – Profiles – Part 3: Functional safety
90 fieldbuses – General rules and profile definitions
91 IEC 61804 (all parts), Function blocks (FB) for process control and Electronic Device Description
92 Language (EDDL)
93 IEC 62541-100, OPC Unified Architecture – Part 100: OPC UA for Devices
94 IEC 62769-1, Field Device Integration (FDI) – Part 1: Overview
95 IEC 62769-2, Field Device Integration (FDI) – Part 2: FDI Client
96 IEC 62769-3, Field Device Integration (FDI) – Part 3: FDI Server
97 IEC 62769-4, Field Device Integration (FDI) – Part 4: FDI Packages
98 IEC 62769-5, Field Device Integration (FDI) – Part 5: FDI Information Model
99 IEC 62769-6, Field Device Integration (FDI) – Part 6: FDI Technology Mapping
100 IEC 62769-7, Field Device Integration (FDI) – Part 7: FDI Communication Devices
101
102 3 Terms, definitions, abbreviated terms and conventions
103 3.1 Terms and definitions
104 For the purposes of this document, the terms and definitions given in IEC 62769-1 apply.

1
 FOUNDATION™ Fieldbus is the trade name of the non-profit consortium Fieldbus Foundation. This information is given for the
convenience of users of this standard and does not constitute an endorsement by IEC of the trademark holder or any of its
products. Compliance does not require use of the trade name. Use of the trade name requires permission of the trade name
holder.

---------------------- Page: 8 ----------------------
oSIST prEN IEC 62769-101-1:2018
65E/620/CDV – 7 – IEC CDV 62769-101-1 © IEC 2018
105 ISO and IEC maintain terminological databases for use in standardization at the following
106 addresses:
107 • ISO Online browsing platform: available at https://www.iso.org/obp
108 • IEC Electropedia: available at http://www.electropedia.org/
109 3.2 Abbreviated terms
110 For the purposes of this document, the following abbreviations apply:
CFF common file format
CP communication profile (see IEC 61784-1 or IEC 61784-2)
CPF communication profile family (see IEC 61784-1 or IEC 61784-2)
EDD Electronic Device Description (see IEC 61804)
FB function block
IM Information Model
SMIB system management information base
VFD virtual field device
111 3.3 Conventions
112 3.3.1 EDDL syntax
113 This part of IEC 62769 specifies content for the EDD component that is part of an FDI
114 Communication Package. EDDL syntax uses the font Courier New. EDDL syntax is used for
115 method signature, variable, data structure and component declarations.
116 3.3.2 XML syntax
117 XML syntax examples use the font Courier New. The XML syntax is used to describe XML
118 document schema.
119 Example: .
120 3.3.3 Capitalizations
121 The IEC 62769 series uses capitalized terms to emphasize that these terms have an FDI specific
122 meaning.
123 Some of these terms use an acronym as a prefix for example
124 • FDI Client, or
125 • FDI Server.
126 Some of these terms are compound terms such as:
127 • Communication Servers, or
128 • Profile Package.
129 Parameter names or attributes are concatenated to a single term, where the original terms start
130 in this term with a capital letter such as:
131 • ProtocolSupportFile, or
132 • ProtocolType.

---------------------- Page: 9 ----------------------
oSIST prEN IEC 62769-101-1:2018
IEC CDV 62769-101-1 © IEC 2018 – 8 – 65E/620/CDV
133 Parameter names or attributes can also be constructed by using an underscore character to
134 concatenate two or more terms such as:
135 • PROFILE_ID, or
136 • Profibus_PA_Network.
137 4 Profile for CP 1/1 (FOUNDATION™ H1)
138 4.1 General
139 This profile specifies the protocol specifics needed for FDI Packages describing communication
140 servers, gateways and devices.
141 4.2 Catalog profile
142 4.2.1 Protocol support file
143 4.2.1.1 Capability file
144 Each CP 1/1 FDI Device Package shall contain a capability file. The capability file part is
145 described in Table 1.
146 Table 1 – Capability File part
Parameter Description
Content Type: txt/plain
Root Namespace: Not applicable
Source Relationship: http://fdi-cooperation.com/2010/relationships/attachment-protocol
Filename: Use file extension .CFF
147 4.2.2 CommunicationProfile definition
148 IEC 62769-4 defines a CommunicationProfileT string type for the Catalog XML schema. Table 2
149 defines the CP 1/1 specific values for this string.
150 Table 2 – CommunicationProfile definition
CommunicationProfile Description
foundation_h1 CP 1/1 device type with a function block application
151
152 4.2.3 Profile device
153 Not supported in this standard.
154 4.2.4 Protocol version information
155 IEC 62769-4 defines an element type named InterfaceT for the Catalog XML Schema. Element
156 type InterfaceT contains an element named Version which is supposed to provide version
157 information about the applied communication protocol profile. The value follows the IEC 62769-4
158 defined version information schema defined in element type VersionT.
159 The major version part of VersionT shall be set to the ITK_VER parameter. The minor and builds
160 parts shall be set to 0.
161 EXAMPLE  For ITK_VER 5, the value for InterfaceT is 5.0.0.

---------------------- Page: 10 ----------------------
oSIST prEN IEC 62769-101-1:2018
65E/620/CDV – 9 – IEC CDV 62769-101-1 © IEC 2018
162 4.3 Associating a Package with a CP 1/1 device
163 4.3.1 Device type identification mapping
164 CP 1/1 device types are uniquely identified by the parameters MANUFAC_ID, DEVICE_TYPE
165 and DEV_REV found in the Resource Block. These parameters are used to associate a given
166 device instance to an FDI Device Package. These parameters are mapped to the FDI Device
167 Package Catalog according to Table 3.
168 Table 3 – Device type catalog mapping
Catalog Element CP Mapping
Manufacturer element of InterfaceT (IEC 62769-4) MANUFAC_ID
String format “0xdddd” where dddd is the MANUFAC_ID
number in hexadecimal format.
DeviceModel element of InterfaceT (IEC 62769-4) DEVICE_TYPE
String format “0xdddd” where dddd is the
DEVICE_TYPE number in hexadecimal format.
DeviceRevision element DEV_REV
ListOfSupportedDeviceRevisionsT (IEC 62769-4)
String format “x.0.0” where x is the DEV_REV in
decimal format (no leading zeros).
169 4.3.2 Device type revision mapping
170 Each device type is identified according to 4.3.1. A device may also include a parameter
171 COMPATIBILITY_REV from the Resource Block. This parameter specifies the lowest device
172 version (DEV_REV) that a new device can replace while maintaining compatibility with a prior
173 FDI Device Package.
174 4.4 Information Model mapping
175 4.4.1 ProtocolType definition
176 Table 4 defines the ProtocolType used to identify CP 1/1 network communications.
177 Table 4 – ProtocolType Foundation_H1 definition
Attribute Value
BrowseName Foundation_H1
IsAbstract False
References NodeClass BrowseName DataType TypeDefinition ModellingRule
Inherits the properties of ProtocolType defined in IEC 62541-100.
178
179 4.4.2 DeviceType mapping
180 Each device type inherits the properties of the DeviceType. The mapping of the inherited
181 properties from the DeviceType is defined in Table 5.
182 Table 5 – Inherited DeviceType Property mapping
Property CP Mapping
SerialNumber DEV_ID (System Management Information Base)
RevisionCounter -1 (not defined)
Manufacturer String obtained from FDI package catalog
(ManufacturerName from PackageT)
Model String obtained from FDI package catalog (Name of
DeviceTypeT, which is a localized name)

---------------------- Page: 11 ----------------------
oSIST prEN IEC 62769-101-1:2018
IEC CDV 62769-101-1 © IEC 2018 – 10 – 65E/620/CDV
Property CP Mapping
a
DeviceManual
entry text string (not supported)
DeviceRevision DEV_REV (Resource Block)
SoftwareRevision SOFTWARE_REV (if available, otherwise empty string)
HardwareRevision HARDWARE_REV (if available, otherwise empty string)
a
Device manuals are exposed as attachments of the FDI Device Package.
183
184 4.4.3 FunctionalGroup Identification definition
185 As defined in IEC 62541-100, each device representation in the FDI Server hosted Information
186 Model shall contain a protocol specific FunctionalGroup called Identification. This
187 FunctionalGroup organizes variables found in the Resource Block of the device type instance.
188 The FunctionalGroup Identification for CP 1/1 is defined in Table 6.
189 Table 6 – Identification Parameters
BrowseName DataType Optional/Mandatory
MANUFAC_ID UInt32 Mandatory
DEV_TYPE UInt16 Mandatory
DEV_REV UInt8 Mandatory
HARDWARE_REV String Optional
SOFTWARE_REV String Optional
COMPATIBILITY_REV UInt8 Optional
CAPABILITY_LEV UInt8 Optional
ITK_VER UInt16 Mandatory
SIF_ITK_VER UInt16 Optional
FD_VER UInt16 Optional
190 4.4.4 BlockType property mapping
191 CP 1/1 device types are block-oriented according to IEC 62541-100. IEC 62769-5 specifies the
192 mapping of EDDL BLOCK_A elements to block types and instances
193 The BLOCK_A maps as a subtype of the topology element BlockType and inherits the properties
194 per IEC 62541-100. The mapping of the inherited properties of the BlockType is specified in
195 Table 7.
196 Table 7 – Inherited BlockType property mapping
Property CP Mapping (Block ParameterSet)
RevisionCounter ST_REV
ActualMode MODE_BLK.ACTUAL
PermittedMode MODE_BLK.PERMITTED
NormalMode MODE_BLK.NORMAL
TargetMode MODE_BLK.TARGET
197 4.4.5 Mapping to Block ParameterSet
198 The ParameterSet is relative to each Block. The ParameterSet includes the
199 CHARACTERISTICS records of the block and all the parameters found in the PARAMETERS,
200 LOCAL_PARAMETERS and LIST_ITEMS.
201 The browse name of the parameters found in the PARAMETERS and LOCAL_PARAMETERS is
202 the member name in the respective lists. For example, ST_REV is the browse name of the Static

---------------------- Page: 12 ----------------------
oSIST prEN IEC 62769-101-1:2018
65E/620/CDV – 11 – IEC CDV 62769-101-1 © IEC 2018
203 Revision parameter. LIST_ITEMS do not have member names; therefore the browse name of
204 each LIST in the LIST_ITEMS is the item name of the list.
205 4.5 Topology elements
206 4.5.1 ConnectionPoint definition
207 The ConnectionPoint type ConnectionPoint_Foundation_H1 shall be used to identify CP 1/1
208 network communication and is defined in Table 8. The ConnectionPoint_Foundation_H1 type is
209 a sub type of the abstract type ConnectionPointType defined in IEC 62541-100.
210 The Address property shall be the H1 node address.
211 The OrdinalNumber property reflects the position of the VFD within the SMIB VFD list. For
212 devices exposing multiple FB VFDs, the OrdinalNumber property is mandatory to address the FB
213 VFD. For devices with a single FB VFD, the OrdinalNumber property c
...