SIST EN 15368:2008
Hydraulic binder for non-structural applications: definition, specifications and conformity criteria
Hydraulic binder for non-structural applications: definition, specifications and conformity criteria
This document applies to Hydraulic Binder for Construction used as binder for preparation of mortar (for masonry, rendering and plastering) and production of other construction products.
This EN 15368 gives the definition and specifies the Hydraulic Binder for Construction (HBC), the types and proportions as well as the requirements for their constituents, furthermore, it specifies the strength classes, the mechanical, physical and chemical requirements EN 15368 also states the conformity criteria and the related rules.
A classification in two levels of strength has been established in order to take in account different products present on the market.
Necessary durability requirements are also given.
NOTE For normal applications the information given in this standard, in EN 998-1 and EN 998-2 is generally sufficient. However, in special cases, an exchange of additional information between the producer and user can be helpful. The details of such an exchange are not within the scope of this standard but should be dealt with in accordance with national standards or other regulations or can be agreed between the parties concerned.
Terms of delivery or other contractual conditions, normally included in documents exchanged between the supplier and the purchaser of Hydraulic Binder for Construction, are outside the scope of this European Standard.
Hydraulisches Bindemittel für Bauwerke - Definitionen, Anforderungen und Konformitätskriterien
Dieses Dokument gilt für hydraulisches Bindemittel für Bauwerke, das als Bindemittel für die Herstellung von Mörtel (Mauermörtel und Außen- und Innenputzmörtel) sowie die Herstellung anderer Bauprodukte verwendet wird.
EN 15368 enthält Definitionen und beschreibt das hydraulische Bindemittel für Bauwerke, die Arten und Anteile sowie die Anforderungen an die Ausgangsstoffe. Des Weiteren werden in der Norm die Festigkeitsklassen sowie die mechanischen, physikalischen und chemischen Eigenschaften festgelegt. Die Konformitätskriterien und die entsprechenden Festlegungen sind auch angegeben.
Eine Klassifizierung in zwei Festigkeitsniveaus wurde vorgenommen, um die verschiedenen Produkte, die auf dem Markt gehandelt werden, zu berücksichtigen.
Die erforderlichen Anforderungen an die Dauerhaftigkeit sind auch angegeben.
ANMERKUNG Für übliche Anwendungen reichen die in dieser Norm, in EN 998-1 und EN 998-2 angegebenen Informationen in der Regel aus. In besonderen Fällen jedoch kann ein Austausch von zusätzlichen Informationen zwischen Hersteller und Abnehmer sinnvoll sein. Die Einzelheiten eines solchen Austausches sind nicht Gegenstand dieser Norm. Sie sollten in Übereinstimmung mit nationalen Normen oder anderen Bestimmungen behandelt werden oder können zwischen den Beteiligten vereinbart werden.
Lieferbedingungen und andere Vertragsvereinbarungen, die üblicherweise in den zwischen dem Lieferanten und dem Käufer des hydraulischen Bindemittels ausgetauschten Dokumenten enthalten sind, sind nicht Gegenstand dieser Europäischen Norm.
Liant hydraulique de construction - Définition, spécifications et criteres de conformité
La présente Norme européenne s’applique au liant hydraulique pour applications non structurelles utilisé dans la construction pour préparer des mortiers pour maçonneries, enduits intérieurs et extérieurs, ainsi que pour fabriquer d’autres produits de construction non structuraux.
La présente Norme européenne donne la définition et la composition du liant hydraulique pour applications non structurelles (HB). Elle inclut des exigences physiques, mécaniques et chimiques et définit les classes de résistance. L’EN 15368 stipule également les critères de conformité et les règles associées. Elle spécifie également les exigences de durabilité nécessaires.
NOTE Pour des applications courantes, les informations données dans la présente norme et dans les spécifications de maçonnerie, EN 998-1 et EN 998-2, sont généralement suffisantes. Toutefois, dans des cas spéciaux, un échange d’informations supplémentaires entre le producteur et l’utilisateur peut se révéler utile. Les détails d’un tel échange ne relèvent pas du domaine d’application de la présente norme, mais il convient de les traiter conformément aux normes nationales ou autres règlements nationaux ; ils peuvent également faire l’objet d’un accord entre les parties concernées.
Les modalités de livraison ou autres conditions contractuelles faisant normalement partie des documents échangés entre le fournisseur et l’acheteur du liant hydraulique pour applications non structurelles n’entrent pas dans le cadre de la présente Norme européenne.
Hidravlično vezivo za nekonstrukcijsko uporabo: definicija, specifikacije in merila skladnosti
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hydraulic binder for non-structural applications: definition, specifications and conformity criteriaVNODGQRVWLLiant hydraulique de construction - Définition, spécifications et criteres de conformitéHydraulisches Bindemittel für Bauwerke - Definitionen, Anforderungen und KonformitätskriterienTa slovenski standard je istoveten z:EN 15368:2008SIST EN 15368:2008en91.100.50ICS:SLOVENSKI
STANDARDSIST EN 15368:200801-marec-2008
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15368January 2008ICS 91.100.50 English VersionHydraulic binder for non-structural applications: definition,specifications and conformity criteriaLiant hydraulique de construction - Définition, spécificationset critères de conformitéHydraulisches Bindemittel für nichttragende Anwendungen- Definition, Anforderungen und KonformitätskriterienThis European Standard was approved by CEN on 13 December 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15368:2008: E
EN 15368:2008 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.4 2 Normative references.4 3 Terms and definitions.5 4 Notation.6 5 Requirements.6 5.1 General.6 5.2 Constituents and composition.6 5.3 Physical and mechanical requirements.7 5.4 Chemical requirements.7 5.5 Additional requirements.8 6 Durability requirements.8 7 Standard designation.8 8 Conformity criteria.9 8.1 General requirements.9 8.2 Conformity criteria for physical, mechanical, chemical properties and evaluation procedure.9 8.3 Conformity requirements.9 8.4 Statistical conformity criteria.10 8.5 Single test result conformity criteria.13 8.6 Conformity criteria for HB composition.13 Annex A (informative)
Water soluble hexavalent chromium.14 Bibliography.15
EN 15368:2008 (E) 3 Foreword This document (EN 15368:2008) has been prepared by Technical Committee CEN/TC 51 “Cement and building limes”, the secretariat of which is held by NBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2008, and conflicting national standards shall be withdrawn at the latest by October 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
EN 15368:2008 (E) 4 Introduction The “Hydraulic binder for non-structural applications" referred to herein has been produced in Italy since 1960s with the name “Calce eminentemente idraulica artificiale in polvere”. The binder was conforming to the requirements of the Italian law n° 595 (26.06.65) and D.M: 31/08/1972. Following the adoption of EN 197-1 in 2000 the product was standardised according to UNI 10892 ”Legante idraulico per costruzioni – definizioni, specifiche e criteri di conformità” (UNI 10892: Building hydraulic binder – composition, specifications and conformity criteria). The product is destined to be used alone or mixed with other binders for the production of mortars for non-structural masonry or rendering and plastering. The experience acquired through the years has shown that the properties of this product satisfy the requirements of both the market and the customers. 1 Scope This European Standard applies to Hydraulic binder for non-structural applications in construction used as binder for preparation of mortar for masonry, rendering and plastering and other non structural construction products.
This European Standard specifies the definition and composition of Hydraulic binder for non-structural applications (HB). It includes physical, mechanical and chemical requirements and defines strength classes. EN 15368 also states the conformity criteria and the related rules. Necessary durability requirements are also given. NOTE For normal applications the information given in this standard, and in the masonry specifications, EN 998-1 and EN 998-2, is generally sufficient. However, in special cases, an exchange of additional information between the producer and user can be helpful. The details of such an exchange are not within the scope of this standard but should be dealt with in accordance with national standards or other regulations or can be agreed between the parties concerned. Terms of delivery or other contractual conditions, normally included in documents exchanged between the supplier and the purchaser of Hydraulic binder for non-structural applications, are outside the scope of this European Standard. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 196-1, Methods of testing cement – Part 1: Determination of strength EN 196-2, Methods of testing cement – Part 2: Chemical analysis of cement
EN 196-3, Methods of testing cement – Part 3: Determination of setting times and soundness EN 196-6, Methods of testing cement – Part 6: Determination of fineness EN 197-1, Cement – Part 1: Composition, specifications and conformity criteria for common cements EN 413-2:2005, Masonry cement – Part 2: Test methods EN 459-1, Building lime – Part 1: Definitions, specifications and conformity criteria EN 459-2:2001, Building lime – Part 2: Test methods
EN 15368:2008 (E) 5 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 hydraulic binder for non-structural applications factory made finely ground inorganic material which, when mixed with water and fine aggregates, produces a mortar with workability, adhesion and strength properties that make it suitable for use in rendering, plastering and masonry work. Hardening of a Hydraulic binder for non-structural applications is mainly due to the hydration of calcium silicates. However, other chemical compounds - i.e. aluminates - also take part in the setting and early stiffening processes thus generating a hardened mass that retains its strength and soundness properties even under water. Although it consists of finely ground granules of different materials, the Hydraulic binder for non-structural applications has a statistically homogeneous composition.
3.2 additives constituents which are added to improve the manufacture or the properties of the Hydraulic binder for non-structural applications, e.g. grinding agents, air-entraining agents, etc. 3.3 allowable probability of acceptance CR for a given sampling plan, the allowed probability of acceptance of Hydraulic binder for non-structural applications with a characteristic value outside the specified characteristic value 3.4 sampling plan specific plan which states the (statistical) sample size(s) to be used, the percentile Pk and the allowable probability of acceptance CR 3.5 characteristic value value of a required property outside which lies a specified percentage, the percentile Pk, of all the values of the population 3.6 specified characteristic value characteristic value of mechanical, physical or chemical property which in the case of an upper limit is not to be exceeded or in the case of a lower limit is, as a minimum, to be reached 3.7 single result limit value value of mechanical, physical or chemical property which - for/any single test result - in the case of an upper limit is not to be exceeded or in the case of a lower limit is, as a minimum, to be reached. 3.8 spot sample sample taken at the same time and from one and the same place, relating to the intended tests. It can be obtained by combining one or more immediately consecutive increments (see EN 196-7). 3.9 autocontrol testing continual testing by the manufacturer of Hydraulic binder for non-structural applications spot samples taken at the point(s) of release from the factory/depot. 3.10 control period
period of production and dispatch identified for the evaluation of the autocontrol test results.
EN 15368:2008 (E) 6 4 Notation Hydraulic binder for non-structural applications is designed by the term HB. There are two strength classes of Hydraulic binder for non-structural applications: 1,5 and 3. 5 Requirements 5.1 General The physical, mechanical and chemical properties of Hydraulic binder for non-structural applications shall be measured by test methods described in EN 413-2 and the relevant parts of EN 196. These European Standards give alternative test methods for some properties but in the event of a dispute only the reference methods shall be used. Where allowed in the relevant part of EN 196, different methods may be used provided they give correlated and equivalent values to those obtained using the reference method. The CEN standard sand used to make the mortars for the tests required by 5.3.4 and 5.3.5 shall fulfil the requirements of EN 196-1. All requirements are specified as characteristic values. They serve to define the performance level and classification of the Hydraulic binder for non-structural applications. 5.2 Constituents and composition Hydraulic binder for non-structural applications shall comprise Portland cement clinker, inorganic constituents and where appropriate additive(s) as given in Table 1, Calcium sulphate is added in small quantities to the other constituents of Hy
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.