SIST EN 1640:2010
(Main)Dentistry - Medical devices for dentistry - Equipment
Dentistry - Medical devices for dentistry - Equipment
This European Standard specifies general requirements for items of dental equipment used in the practice of dentistry and which are medical devices. It includes requirements for intended performance, design attributes, components, packaging, marking, labelling, and information supplied by the manufacturer.
This European Standard does not include requirements for dental X-ray equipment.
This European Standard does not apply to any dental instruments connected to an item of dental equipment. These instruments are covered by the level 2 and level 3 standards for dental instruments.
Tests for demonstrating compliance with this standard are contained in the level 3 standards, if appropriate.
Zahnheilkunde - Medizinprodukte für die Zahnheilkunde - Ausrüstung
Diese Europäische Norm legt allgemeine Anforderungen an Ausrüstungsgegenstände fest, die in der Zahn-, Mund- und Kieferheilkunde verwendet werden und die Medizinprodukte sind. Sie enthält Anforderungen an die geplante Leistung, die Konstruktionsmerkmale, die Bauteile, die Verpackung, die Kennzeichnung, die Etikettierung und die Informationen durch den Hersteller.
Diese Norm enthält keine Anforderungen an dentale Röntgengeräte.
Diese Norm gilt nicht für zahnärztliche Instrumente, die mit einem zahnärztlichen Ausrüstungsgegenstand verbunden sind. Für diese Instrumente gelten die Normen der Ebenen 2 und 3 für zahnärztliche Instrumente.
Für Prüfungen, die die Konformität mit dieser Norm nachweisen, gelten die entsprechenden Normen der Ebene 3, falls anwendbar.
Art dentaire - Dispositifs médicaux pour l'art dentaire - Matériel
La présente Norme européenne établit les exigences générales relatives aux pièces de matériel dentaire utilisées dans la pratique de l’art dentaire et constituant des dispositifs médicaux. Elle comporte également les exigences relatives aux performances prévues, aux caractéristiques de conception, aux composants, à l’emballage, au marquage, à l’étiquetage, ainsi qu’aux informations fournies par le fabricant.
La présente Nome européenne ne s’applique pas aux matériels à rayons X.
La présente Norme européenne ne s’applique pas aux instruments dentaires connectés à une pièce de matériel dentaire. Ceux-ci sont traités dans l’EN 1639.
Les essais destinés à établir la conformité à la présente norme sont décrits, le cas échéant, dans les normes de niveau 3.
Zobozdravstvo - Medicinski pripomočki za zobozdravstvo - Oprema
Ta evropski standard določa splošne zahteve za zobozdravstveno opremo, ki se uporablja v zobozdravstveni praksi in je medicinski pripomoček. Vključuje zahteve za predvideno delovanje, lastnosti modela, sestavne dele, pakiranje, označevanje, uporabo nalepk in informacije, ki jih priskrbi proizvajalec. Ta evropski standard ne velja za zobozdravstveno rentgensko opremo. Ta evropski standard ne velja za noben zobozdravstveni instrument, povezan s predmetom zobozdravstvene opreme. Te instrumente vključuje standard EN 1639. Preskusi za dokazovanje skladnosti s tem standardom so navedeni v standardih 3. ravni, če je to primerno.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Zahnheilkunde - Medizinprodukte für die Zahnheilkunde - AusrüstungArt dentaire - Dispositifs médicaux pour l'art dentaire - MatérielDentistry - Medical devices for dentistry - Equipment11.060.20Dental equipmentICS:Ta slovenski standard je istoveten z:EN 1640:2009SIST EN 1640:2010en,fr,de01-januar-2010SIST EN 1640:2010SLOVENSKI
STANDARDSIST EN 1640:20051DGRPHãþD
SIST EN 1640:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1640
October 2009 ICS 11.060.20 Supersedes EN 1640:2004English Version
Dentistry - Medical devices for dentistry - Equipment
Art dentaire - Dispositifs médicaux pour l'art dentaire - Matériel
Zahnheilkunde - Medizinprodukte für die Zahnheilkunde - Ausrüstung This European Standard was approved by CEN on 19 September 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1640:2009: ESIST EN 1640:2010
EN 1640:2009 (E) 2 Contents page Foreword . 3Introduction . 41Scope . 52Normative references . 53Terms and definitions . 64Requirements . 64.1General . 64.2Chemical and physical properties . 64.2.1Materials . 64.2.2Contaminants and residues . 74.2.3Contact with substances . 74.2.4Ingress and leaking of substances . 74.3Control of contamination . 74.4Construction and environmental properties . 74.5Protection against radiation . 74.6Equipment connected to or equipped with an energy source . 84.7Programmable electronic subsystems (software programmes) . 84.8Protection against electrical risks . 84.9Protection against mechanical and thermal risks . 84.9.1Mechanical stability . 84.9.2Vibration . 84.9.3Noise . 84.9.4Electricity, gas, hydraulic and pneumatic energy . 84.9.5Surface temperature . 94.10Controls and indicators . 94.11Clinical evaluation . 94.12Marking, labelling and information supplied by the manufacturer . 94.12.1General . 94.12.2Symbols . 94.12.3Marking . 94.12.4Label . 104.12.5Detachable components . 104.12.6Instructions for use . 10Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 93/42/EEC . 11Bibliography . 12
SIST EN 1640:2010
EN 1640:2009 (E) 3 Foreword This document (EN 1640:2009) has been prepared by Technical Committee CEN/TC 55 “Dentistry”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2010, and conflicting national standards shall be withdrawn at the latest by April 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1640:2004. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive 93/42/EEC. For the relationship with EU Directive 93/42/EEC, see informative Annex ZA, which is an integral part of this document. The following changes were made: a) Normative references: 1) Addition of new relevant product standards, issued after 2004: EN 60601-1-4, EN 62304, EN ISO 7494-1, EN ISO 10650-1, EN ISO 10650-2, EN ISO 14155-1, EN ISO 14155-2, EN ISO 14971, EN ISO 17664, EN ISO 21530; 2) Deletion of the following withdrawn standard: EN ISO 7494. b) 4.11 Clinical evaluation: Clarification of requirement for a clinical evaluation; c) 4.12.6 Instructions for use: Clarification of requirement that information may be provided in an electronic format; d) Annex ZA: Actualisation of correspondence between this European Standard and Directive 93/42/EEC, as amended by Directive 2007/47/EC. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 1640:2010
EN 1640:2009 (E) 4 Introduction There are three levels of European Standards dealing with medical devices used in dentistry. These are as follows: — Level 1: General requirements for medical devices; — Level 2: Requirements for families of medical devices used in dentistry; — Level 3: Specific requirements for types of medical devices used in dentistry. There are no level 1 standards written exclusively in respect of medical devices used in dentistry. This European Standard is a level 2 standard and details requirements that apply to those items of dental equipment which are medical devices. For energy sources to be connected to dental instruments, this European Standard should be used in conjunction with EN 1639, which is applicable for dental instruments. This European Standard also indicates that there are additional requirements in the level 3 standards. Where available, these are included as normative references. To cover all the requirements for a particular product, it is necessary to use a standard of the lowest available level. In the Bibliography a reference for guidance on the classification of dental devices and accessories [3] is given. SIST EN 1640:2010
EN 1640:2009 (E) 5 1 Scope This European Standard specifies general requirements for dental equipment used in the practice of dentistry and which are medical devices. It includes requirements for intended performance, design attributes, components, packaging, marking, labelling, and information supplied by the manufacturer. This European Standard does not apply to dental X-ray equipment. This European Standard does not apply to any dental instruments connected to an item of dental equipment. These instruments are covered by EN 1639. Tests for demonstrating compliance with this standard are contained in the level 3 standards, if appropriate. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 980, Symbols for use in the labelling of medical devices EN 1041, Information supplied by the manufacturer of medical devices EN 1639, Dentistry — Medical devices for dentistry — Instruments EN 21942-1:1991, Dental vocabulary — Part 1: General and clinical terms EN 21942-4:1993, Dental vocabulary — Part 4: Dental equipment (ISO 1942-4:1989) EN 60601-1, Medical electrical equipment — Part 1: General requirements for basic safety and essential performance (IEC 60601-1:2005) EN 60601-2-22, Medical Electrical Equipment — Part 2-22: Particular requirements for the safety of diagnostic and therapeutic laser equipment (IEC 60601-2-22:1995) EN 60601-1-4, Medical electrical equipment — Part 1: General requirements for safety — 4. Collateral standard: Programmable electrical medical systems(IEC 60601-1-4:1996) EN 60825-1, Safety of laser products — Part 1: Equipment classification and requirements (IEC 60825-1:2007) EN 62304. Medical device software — Software life-cycle processes (IEC 62304:2006) EN ISO 6875, Dental equipment — Dental patient chair (ISO 6875:1995) EN ISO 7488, Dental amalgamators (ISO 7488:1991) EN ISO 7494-1, Dentistry — Dental units — Part 1: General requirements and test methods (ISO 7494-1:2004) EN ISO 7494-2, Dentistry — Dental units — Part 2: Water and air supply (ISO 7494-2:2003) EN ISO 9680, Dentistry — Operating lights (ISO 9680:2007) EN ISO 9687, Dental equipment — Graphical symbols (ISO 9687:1993) EN ISO 10637, Dental equipment — High- and medium-volume suction systems (ISO 10637:1999) EN ISO 10650-1, Dentistry — Powered polymerization activators — Part 1: Quartz tungsten halogen lamps
(ISO 10650-1:2004) SIST EN 1640:2010
EN 1640:2009 (E) 6 EN ISO 10650-2, Dentistry — Powered polymerization activators — Part 2: Light-emitting diode (LED) lamps
(ISO 10650-2:2007) EN ISO 11143, Dentistry — Amalgam separators (ISO 11143:2008) EN ISO 11498, Dental handpieces — Dental low-voltage electrical motors (ISO 11498:1997) EN ISO 13294, Dental handpieces — Dental air-motors (ISO 13294:1997) EN ISO 14155-1, Clinical investigation of medical devices for human subjects — Part 1: General requirements
(ISO 14155-1:2003) EN ISO 14155-2, Clinical investigation of medical devices for human subjects — Part 2: Clinical investigation plans (ISO 14155-2:2003) EN ISO 14971, Medical devices — Application of risk management to medical devices (ISO 14971:2007, Corrected version 2007-10-01) EN ISO 17664, Sterilization of medical devices — Information to be provided by the manufacturer for the processing of resterilizable medical devices (ISO 17664:2004) EN ISO 21530, Dentistry — Materials used for dental equipment surface
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.