SIST EN 301 029-10:2000

• Abstract:

  This EN will specify the support of frame relay.

• Status: Published
• Publication Date: 30-Nov-2000
• ICS: 33.080 - Integrated Services Digital Network (ISDN)
• Technical Committee: SPS - Signalling protocols and switching
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Dec-2000
• Due Date: 01-Dec-2000
• Completion Date: 01-Dec-2000
• Ref Project: ETSI EN 301 029-10 V1.1.3 (1998-10) - Broadband Integrated Services Digital Network (B-ISDN); Signalling System No.7; B-ISDN User Part (B-ISUP); Part 10: Support of frame relay [ITU-T Recommendation Q.2727 (1996)]

SIST EN 301 029-10:2000 is the Slovenian adoption of EN 301 029-10 V1.1.3, a European Telecommunications Standards Institute (ETSI) standard for Broadband Integrated Services Digital Network (B-ISDN) signalling. It specifies support of frame relay in the B-ISDN User Part (B-ISUP), based on ITU-T Recommendation Q.2727 (1996). In practice, it is the reference for implementing and checking how B-ISUP carries frame relay-related signalling.

What does SIST EN 301 029-10:2000 specify?

SIST EN 301 029-10:2000 specifies the support of frame relay in B-ISUP. The standard is part 10 of a multi-part B-ISUP signalling capability set, so it is meant to be used as one piece of a broader signalling framework rather than as a stand-alone description of all B-ISDN signalling.

The foreword places this part in B-ISUP signalling capability set 2, step 1. It also states that all elements of ITU-T Recommendation Q.2727 (1996) apply, which tells implementers that the technical content of this part is inherited from that ITU-T recommendation.

The document is organized as:

• front matter and identification details
• ETSI foreword
• national transposition dates
• endorsement notice
• history and publication information

What are the key requirements of SIST EN 301 029-10:2000?

SIST EN 301 029-10:2000 takes the frame relay support defined in ITU-T Recommendation Q.2727 (1996) and makes it part of the European standard. The most important practical point is that equipment claiming conformance to this part must implement the frame relay-related B-ISUP behaviour from that referenced recommendation.

The standard also sits inside a controlled series of B-ISUP parts. That matters because network designers and test teams need to align this part with the other parts of the same capability set when they define signalling features, interface behaviour, and interoperability tests.

Key technical points

• Frame relay support - this is the subject of the part. In practice, it is the signalling capability that network nodes need when frame relay is used over B-ISDN signalling.
• B-ISUP scope - the standard applies to the B-ISDN User Part of Signalling System No.7 (SS7). This tells implementers which signalling layer is affected.
• ITU-T basis - all elements of ITU-T Recommendation Q.2727 (1996) apply. For readers, that means the European standard is tied directly to the ITU-T technical definition.
• Capability set 2, step 1 - the part belongs to a named signalling capability set. This matters when comparing feature sets across different B-ISUP parts.
• Multi-part relationship - the foreword lists the other parts of the series. That helps procurement and engineering teams identify the companion documents needed for a complete B-ISUP implementation.
• National transposition - the document gives adoption, announcement, publication and withdrawal dates for conflicting national standards. This is useful for compliance and migration planning.

What terms does SIST EN 301 029-10:2000 define?

• B-ISDN - Broadband Integrated Services Digital Network, the broadband digital network family covered by the standard.
• SS7 - Signalling System No.7, the signalling architecture used for control information.
• B-ISUP - B-ISDN User Part, the SS7 user part addressed by this standard.
• NNI - Network Node Interface, the interface type named in the series title and companion parts.
• Frame relay - the signalling subject of this part, used here as the feature supported by B-ISUP.
• ISDN - Integrated Services Digital Network, the broader network family referenced in the title and keywords.
• ISUP - ISDN User Part, the signalling term reflected in the B-ISUP acronym.

Who uses SIST EN 301 029-10:2000?

SIST EN 301 029-10:2000 is used by telecom equipment designers, signalling protocol engineers, network operators, test laboratories and conformity teams working on B-ISDN systems. It is relevant when implementing or verifying B-ISUP behaviour for frame relay support, especially in SS7-based network node interfaces.

Buyers and quality managers use it when they need to confirm that a product or subsystem follows the correct B-ISUP part for frame relay. Procurement teams can also use it to make sure a supplier is referencing the right ETSI/ITU-T signalling standard.

What changed in SIST EN 301 029-10:2000 from the previous edition?

SIST EN 301 029-10:2000 is identical to EN 301 029-10 V1.1.3 (1998-10).

Which standards are used with SIST EN 301 029-10:2000?

• ITU-T Recommendation Q.2727 (1996) - this is the technical basis for the part; the endorsement notice states that all its elements apply.
• EN 301 029 series, Parts 1-10 - the foreword identifies the companion parts of the B-ISUP signalling capability set 2, step 1:
  • Part 1: overview of the B-ISDN NNI signalling capability set 2, step 1
  • Part 2: point-to-multipoint call/connection control
  • Part 3: additional traffic parameters for sustainable cell rate and quality of service
  • Part 4: look-ahead without state change for the network node interface
  • Part 5: negotiation during connection setup
  • Part 6: modification procedures
  • Part 7: ATM end system address
  • Part 9: network generated session identifier
  • Part 10: support of frame relay

What does the SIST EN 301 029-10:2000 document contain?

The document contains ETSI front matter, copyright and intellectual property notices, a foreword, national transposition dates, an endorsement notice and a short publication history. It identifies the standard as part 10 of the B-ISUP capability set 2, step 1 series and names the companion parts of that series.

It also gives the publication reference for the European Standard and the Slovenian adoption details. For readers, this makes the document useful as a traceable standards reference for implementation, procurement and compliance records.

SLOVENSKI STANDARD
3SIST EN 301 029-10:
01-december-
âLURNRSDVRYQRGLJLWDOQRRPUHåMH]LQWHJULUDQLPLVWRULWYDPL%,6'16LJQDOL]DFLMD
ãW8SRUDEQLãNLGHO%,6'1%,683GHO3RGSRUDEORNRYQHJD
SRVUHGRYDQMDSULSRURþLOR,7874
Broadband Integrated Services Digital Network (B-ISDN); Signalling System No.7; B-
ISDN User Part (B-ISUP); Part 10: Support of frame relay [ITU-T Recommendation
Q.2727 (1996)]
Ta slovenski standard je istoveten z: EN 301 029-10 V1.1.3
ICS:
33.080 Digitalno omrežje z Integrated Services Digital
integriranimi storitvami Network (ISDN)
(ISDN)
3SIST EN 301 029-10: en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 301 029-10 V1.1.3 (1998-10)
European Standard (Telecommunications series)
Broadband Integrated Services Digital Network (B-ISDN);
Signalling System No.7;
B-ISDN User Part (B-ISUP);
Part 10: Support of frame relay
[ITU-T Recommendation Q.2727 (1996)]

2 EN 301 029-10 V1.1.3 (1998-10)
Reference
DEN/SPS-01043-10 (9j2i0ie0.PDF)
Keywords
B-ISDN, SS7, B-ISUP, NNI, frame relay,
broadband, ISDN, ISUP
ETSI
Postal address
F-06921 Sophia Antipolis Cedex - FRANCE
Office address
650 Route des Lucioles - Sophia Antipolis
Valbonne - FRANCE
Tel.: [phone]  Fax: [phone]
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Internet
[e-mail]
http://www.etsi.org
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1998.
All rights reserved.
ETSI
3 EN 301 029-10 V1.1.3 (1998-10)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect
of ETSI standards", which is available free of charge from the ETSI Secretariat. Latest updates are available
...