SIST EN 249:2011
(Main)Sanitary appliances - Shower trays made from crosslinked cast acrylic sheets - Requirements and test methods
Sanitary appliances - Shower trays made from crosslinked cast acrylic sheets - Requirements and test methods
This European Standard specifies the requirements for shower trays for domestic purposes made from crosslinked cast acrylic sheet conforming with EN 263 with the aim of ensuring that the product, when installed in accordance with the manufacturer’s instructions, will provide satisfactory performance in use. This standard is applicable to all sizes and shapes of shower trays.
Sanitärausstattungsgegenstände - Duschwannen, hergestellt aus vernetzten gegossenen Acrylplatten - Anforderungen und Prüfverfahren
Diese Europäische Norm legt Anforderungen an Duschwannen für den Hausgebrauch, hergestellt aus vernetzten gegossenen Acrylplatten, die EN 263 entsprechen, fest, mit dem Ziel sicherzustellen, dass das nach den Einbauanweisungen des Herstellers eingebaute Produkt eine zufrieden stellende Gebrauchs-tauglichkeit aufweist. Diese Norm ist auf alle Größen und Formen von Duschwannen anwendbar.
Appareils sanitaires - Receveurs de douche en feuilles d'acrylique réticulées coulées - Prescriptions et méthodes d'essai
La présente Norme européenne spécifie les prescriptions concernant les receveurs de douche à usage domestique constitués de feuilles d’acrylique réticulées coulées conformes à l’EN 263, dans le but de s’assurer que le produit, lorsqu’il est installé conformément aux instructions du fabricant, fournit une performance satisfaisante en cours d’utilisation. La présente norme est applicable aux receveurs de douche de toutes tailles et de toutes formes.
Sanitarne naprave - Kopalne kadi za prhanje iz litih akrilnih plošč - Zahteve in preskusne metode
Ta evropski standard opredeljuje zahteve za kopalne kadi za prhanje v domači uporabi, narejene iz zamreženih litih akrilnih plošč, ki so v skladu z EN 263 in zagotavljajo, da proizvod, kadar je nameščen v skladu z navodili proizvajalca, omogoča zadovoljivo delovanje. Ta standard velja za vse velikosti in oblike kopalnih kadi za prhanje.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.QHW]WHQSanitary appliances - Shower trays made from crosslinked cast acrylic sheets - Requirements and test methods91.140.70Sanitarne napraveSanitary installationsICS:Ta slovenski standard je istoveten z:EN 249:2010SIST EN 249:2011en,fr,de01-november-2011SIST EN 249:2011SLOVENSKI
STANDARD
SIST EN 249:2011
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 249
March 2010 ICS 91.140.70 English Version
Sanitary appliances - Shower trays made from crosslinked cast acrylic sheets - Requirements and test methods
Appareils sanitaires - Receveurs de douche en feuilles d'acrylique réticulées coulées - Prescriptions et méthodes d'essai
Sanitärausstattungsgegenstände - Duschwannen, hergestellt aus vernetzten gegossenen Acrylplatten - Anforderungen und Prüfverfahren This European Standard was approved by CEN on 14 February 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 249:2010: ESIST EN 249:2011
EN 249:2010 (E) 2 Contents Page Foreword .31 Scope .42 Normative References .43 Terms and definitions .44 Requirements .44.1 General .44.2 Material .44.3 Surface appearance .44.4 Waste outlet hole .44.5 Overflow hole .54.6 Hole edges .54.7 Dimensional deviations .54.8 Geometric deviations .54.8.1 General .54.8.2 Squaring .54.8.3 Straightness of the rim sides .54.8.4 Straightness of the bottom edge of the rim .54.8.5 Flatness of the top surface of rim .54.9 Bottom of the shower tray .54.10 Resistance to temperature changes .64.11 Resistance to impact .64.12 Permitted deflections .64.13 Rim .65 Marking .6Annex A (normative)
Shower tray test methods .7A.1 Sequence of tests .7A.2 Geometric deviations .7A.2.1 Test apparatus .7A.2.2 Squaring .7A.2.3 Straightness of the rim side .8A.2.4 Straightness of the bottom edge of the rim .9A.2.5 Flatness of the top surface of the rim. 10A.3 Resistance to temperature change . 11A.3.1 Test apparatus . 11A.3.2 Procedure . 11A.4 Resistance to impact . 12A.4.1 Test apparatus . 12A.4.2 Procedure . 12A.5 Determination of deflections . 12A.5.1 General . 12A.5.2 Test apparatus . 12A.5.3 Preloading . 13A.5.4 Deflection test 1 − Deflection of the rim and the bottom due to a load on the bottom . 13A.5.5 Deflection test 2 − Deflection of the rim due to a load on the rim on the side of entry . 14Bibliography . 17 SIST EN 249:2011
EN 249:2010 (E) 3 Foreword This document (EN 249:2010) has been prepared by Technical Committee CEN/TC 163 “Sanitary appliances”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2010, and conflicting national standards shall be withdrawn at the latest by September 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 249:2011
EN 249:2010 (E) 4 1 Scope This European Standard specifies the requirements for shower trays for domestic purposes made from crosslinked cast acrylic sheet conforming with EN 263 with the aim of ensuring that the product, when installed in accordance with the manufacturer's instructions, will provide satisfactory performance in use. This standard is applicable to all sizes and shapes of shower trays.
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 251, Shower trays
Connecting dimensions EN 263, Sanitary appliances
Crosslinked cast acrylic sheets for baths and shower trays for domestic purposes 3 Terms and definitions
For the purposes of this document the following terms and definitions apply. 3.1 domestic purposes use in homes, hotels, accommodation for students, hospitals and similar buildings, except when special medical provisions are required 4 Requirements 4.1 General The manufacturer shall provide instructions for installation and care with each shower tray.
The shower tray shall be free from sharp edges that would be exposed after the installation of the shower tray in accordance with the manufacturer's instructions. 4.2 Material The shower tray shall be manufactured from crosslinked cast acrylic sheet complying with EN 263. 4.3 Surface appearance When the shower tray is visually inspected under strong and oblique illumination there shall be no evidence of cracks, chips, or other surface defects, such as unexpected changes in colours, etc., that will impair the appearance or performance of the shower tray. 4.4 Waste outlet hole The shower tray shall have at least one outlet hole. The dimensions of the waste outlet hole and the clearance around the waste outlet hole shall either be in accordance with the requirements of EN 251 or the manufacturer shall supply or recommend a suitable waste outlet fitting. SIST EN 249:2011
EN 249:2010 (E) 5 4.5 Overflow hole When the shower tray is provided with an overflow hole the dimensions of the overflow hole and the clearance around the overflow hole shall either be in accordance with the requirements of EN 251 or the manufacturer shall supply or recommend a suitable overflow fitting. 4.6 Hole edges The edges of any holes in the shower tray shall not show evidence of chips, cracks, or any other defects that can impair the appearance or performance of the shower tray. 4.7 Dimensional deviations The dimensions of shower trays shall not deviate from the size quoted by the manufacturer by greater than ± 5 mm. If the manufacturer states two sizes (e.g. both a work size and a nominal size) he shall state to which size the permitted deviations apply. For round shower trays, length and width correspond to the diameter. 4.8 Geometric deviations 4.8.1 General The straight sides or edges of the shower tray that might abut independent surroundings or supporting structures shall comply with the requirements of 4.8.2 to 4.8.4 and all shower trays shall comply with 4.8.5. NOTE These requirements are not applicable to sides or edges that are purposedly designed as curves or slopes. 4.8.2 Squaring When tested in accordance with A.2.2 the deviation from square, ∆q, shall be less than or equal to 5 mm. 4.8.3 Straightness of the rim sides When tested in accordance with A.2.3 the deviation from straightness of the rim sides, ∆s, shall be less than or equal to 5 mm. 4.8.4 Straightness of the bottom edge of the rim When tested in accordance with A.2.4 the deviation from straightness of the
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.