SIST EN 13164:2013+A1:2015/oprA2:2018

Thermal insulation products for buildings - Factory made extruded polystyrene foam (XPS) products - Specification

DOW = DAV + 21 months

Wärmedämmstoffe für Gebäude - Werkmäßig hergestellte Produkte aus extrudiertem Polystyrolschaum (XPS) - Spezifikation

Produits isolants thermiques pour le bâtiment - Produits manufacturés en mousse de polystyrène extrudé (XPS) - Spécification

Toplotnoizolacijski proizvodi za stavbe - Proizvodi iz ekstrudiranega polistirena (XPS) - Specifikacija

General Information

• Status: Not Published
• Public Enquiry End Date: 25-Nov-2018
• ICS: 91.100.60 - Thermal and sound insulating materials
• Technical Committee: TOP - Thermal insulation
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 10-Aug-2021
• Due Date: 15-Aug-2021
• Completion Date: 10-Aug-2021
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Mandate: M/103 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on thermal insulating products
• Ref Project: EN 13164:2012+A1:2015/prA2 - Thermal insulation products for buildings - Factory made extruded polystyrene foam (XPS) products - Specification

Relations

• Amends: SIST EN 13164:2013+A1:2015 - Thermal insulation products for buildings - Factory made extruded polystyrene foam (XPS) products - Specification
• Effective Date: 06-Sep-2017

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13164:2013+A1:2015/oprA2:2018
01-november-2018
Toplotnoizolacijski proizvodi za stavbe - Proizvodi iz ekstrudiranega polistirena
(XPS) - Specifikacija
Thermal insulation products for buildings - Factory made extruded polystyrene foam
(XPS) products - Specification
Wärmedämmstoffe für Gebäude - Werkmäßig hergestellte Produkte aus extrudiertem
Polystyrolschaum (XPS) - Spezifikation
Produits isolants thermiques pour le bâtiment - Produits manufacturés en mousse de
polystyrène extrudé (XPS) - Spécification
Ta slovenski standard je istoveten z: EN 13164:2012+A1:2015/prA2
ICS:
91.100.60 0DWHULDOL]DWRSORWQRLQ Thermal and sound insulating
]YRþQRL]RODFLMR materials
SIST EN en,fr,de
13164:2013+A1:2015/oprA2:2018
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13164:2013+A1:2015/oprA2:2018

---------------------- Page: 2 ----------------------

SIST EN 13164:2013+A1:2015/oprA2:2018


DRAFT
EUROPEAN STANDARD
EN 13164:2012+A1:2015
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA2
September 2018
ICS 91.100.60
English Version

Thermal insulation products for buildings - Factory made
extruded polystyrene foam (XPS) products - Specification
Produits isolants thermiques pour le bâtiment - Wärmedämmstoffe für Gebäude - Werkmäßig
Produits manufacturés en mousse de polystyrène hergestellte Produkte aus extrudiertem
extrudé (XPS) - Spécification Polystyrolschaum (XPS) - Spezifikation
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 88.

This draft amendment A2, if approved, will modify the European Standard EN 13164:2012+A1:2015. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13164:2012+A1:2015/prA2:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13164:2013+A1:2015/oprA2:2018
EN 13164:2012+A1:2015/prA2:2018 (E)
Contents Page
European foreword . 3
1 Modification to the European foreword . 4
2 Modifications to the Scope . 4
3 Modifications to Clause 2, "Normative references" . 4
4 Modifications to Clause 3, "Terms, definitions, symbols, units, abbreviated terms" . 4
5 Modification to Clause 4, "Requirements" . 5
6 Modification to 4.1, "General" . 5
7 Modification to 4.2.1, "Thermal resistance and thermal conductivity" . 5
8 Modification to 4.2.5.3, "Durability of thermal resistance and thermal conductivity
against ageing / degradation . 5
9 Modification to 4.3.10, "Release of dangerous substances" . 5
10 Modification to 4.3.12, "Continuous glowing combustion" . 6
11 Modification to 5.3.2, "Thermal resistance and thermal conductivity" . 6
12 Modification to Clause 6, "Designation code" . 7
13 Modification to Clause 7, "Assessment and Verification of the Constancy of
Performance (AVCP)" . 8
14 Modification to Clause 8, "Marking and labelling" . 8
15 Modifications to Annex B, "Product type determination (PTD) and Factory
production control (FPC)" . 8
16 Modification to Annex E, "Additional properties" . 13
17 Modification to Annex ZA, "Clauses of this European Standard addressing the
provisions of the EU Construction Products Regulation" . 14

2

---------------------- Page: 4 ----------------------

SIST EN 13164:2013+A1:2015/oprA2:2018
EN 13164:2012+A1:2015/prA2:2018 (E)
European foreword
This document (EN 13164:2012+A1:2015/prA2:2018) has been prepared by Technical Committee
CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
For relationship with EU Regulations, see informative Annex ZA which is an integral part of this
document.
3

---------------------- Page: 5 ----------------------

SIST EN 13164:2013+A1:2015/oprA2:2018
EN 13164:2012+A1:2015/prA2:2018 (E)
1 Modification to the European foreword
In the seventh paragraph, delete ", and supports essential requirements of EU Directive(s)."
Delete the ninth paragraph (list of changes) and replace the tenth and eleventh paragraph with the
following:
"Amendment A2 modifies EN 13164:2012 and its A1 amendment. This amendment introduces or
corrects:
a) Modified the clause "Release of Dangerous substance";
b) Modified the definition for "class F" in the clause "reaction to fire";
c) Delete 4.3.12 Continuous glowing combustion;
d) Modifications to be in line with the CPR e.g. PTD replaced by TT;
e) Modified the Annex ZA;
f) Editorial modifications in different parts of the text and linked to the above modification.".
In the fourteenth paragraph, add the following standard to the end of the list of standards:
"EN 16069, Thermal insulation products for buildings — Factory made products of polyethylene foam
(PEF) — Specification".
2 Modifications to the Scope
Replace the first sentence with:
"This European Standard specifies the characteristics for factory made products of extruded
polystyrene foam, with or without facings or coatings, which are used for thermal insulation of
buildings.".
Replace the third paragraph with:
"This standard describes product characteristics and includes procedures for testing, assesment and
verification of constancy of performance (AVCP), marking and labelling.".
3 Modifications to Clause 2, "Normative references"
Add the following references:
"EN 16516, Construction products — Assessment of release of dangerous substances — Determination of
emissions into indoor air
EN ISO 4590, Rigid cellular plastics — Determination of the volume percentage of open cells and of closed
cells (ISO 4590)".
4 Modifications to Clause 3, "Terms, definitions, symbols, units, abbreviated
terms"
Delete the term and definition for "3.1.6 level" and "3.1.7 class" and modify the numbers of the remaining
terms accordingly.
4

---------------------- Page: 6 ----------------------

SIST EN 13164:2013+A1:2015/oprA2:2018
EN 13164:2012+A1:2015/prA2:2018 (E)
Delete the following abbreviated terms:
PTD is Product Type Determination (previously named ITT for Initial Type Test)
VCP is Verification of Constancy of Performance (previously named evaluation of conformity)
Add the following abbreviated term:
"
TT is Type Testing
CWFT Classification without further testing
".
5 Modification to Clause 4, "Requirements"
In the title of the clause, replace the term "Requirements" with "Characteristics".
6 Modification to 4.1, "General"
Replace the text in the clause with the following:
"Product properties shall be assessed in accordance with Clause 5. To comply with this standard,
products shall meet the characteristics of 4.2, and the characteristics of 4.3 as appropriate.
For multi-layered products, additional characteristics are given in Annex D.
One test result for a product property is the average of the measured values on the number of test
specimens given in Table 9.
NOTE Information on additional properties is given in Annex E.".
7 Modification to 4.2.1, "Thermal resistance and thermal conductivity"
Please replace the second paragraph with the following:
"The thermal resistance and thermal conductivity shall be determined in accordance with Annex A and
Annex C and declared according to the following:".
8 Modification to 4.2.5.3, "Durability of thermal resistance and thermal
conductivity against ageing / degradation
Replace the current title of the clause with "Durability of thermal resistance and thermal conductivity
against ageing / degradation".
9 Modification to 4.3.10, "Release of dangerous substances"
Replace the text in the clause with the following:
1
"If the release of dangerous substances into indoor air is tested, this shall be done according to
EN 16516.
NOTE 1 An informative database covering European and national provisions on dangerous substances is
available at the Construction web site on EUROPA accessed through: http://ec.europa.eu/growth/tools-
databases/cp-ds ".

1 See for reference the LCI list of the European Commission "Agreed EU-LCI values"
(http://ec.europa.eu/growth/sectors/construction/eu-lci/values_en).
5

---------------------- Page: 7 ----------------------

SIST EN 13164:2013+A1:2015/oprA2:2018
EN 13164:2012+A1:2015/prA2:2018 (E)
10 Modification to 4.3.12, "Continuous glowing combustion"
Delete the whole clause.
11 Modification to 5.3.2, "Thermal resistance and thermal conductivity"
Replace Table 9 with the following:
"Table 9 — Test methods, test specimens and conditions
Dimensions in millimetres
Clause Minimum
 Specific conditions
Test specimen
number of

measuremen
Length and
Test
a
ts to get one
width
No Title
method
test result
4.2.1 Thermal resistance EN 12667 See EN 12667 1 See Annex C
- or or EN 12939

and Annex C
Thermal EN 12939
conductivity
4.2.2 Length and width EN 822 Full size 1 –
4.2.2 Squareness on EN 824 Full size 1 .
length and width
4.2.2 Flatness EN 825 Full size 1 –
4.2.3 Thickness EN 823 Full size 1 Load: (250 ± 5) Pa
4.2.4 Reaction to fire of See EN 13501-1 and EN 15715 See Clause 5 of
the product as EN 15715:2009
placed on the
market
4.3.2 Dimensional EN 1604 200 x 200 2 Condition specimens
stability under for 45 days
specified conditions
4.3.3 Deformation EN 1605 100 x 100 3 Condition specimens
for 45 days
under specified
compressive load
and temperature
conditions
4.3.4 Compressive EN 826 100 x 100 5 Condition specimens
stress/ for 45 days
 strength  150 x 150 3 (Length and width of
specimen shall be ≥
thickness of specimen)
4.3.5 Tensile strength EN 1607 50 x 50 5 Condition specimens
perpendicular to for 45 days
faces
6

---------------------- Page: 8 ----------------------

SIST EN 13164:2013+A1:2015/oprA2:2018
EN 13164:2012+A1:2015/prA2:2018 (E)
Clause Minimum
 Specific conditions
Test specimen
number of

Length and measuremen
Test
a
ts to get one
width
No Title
method
test result
4.3.6 Compressive creep EN 1606 100 x 100 2 Test specimen selected
from the area giving
150 x 150 2
average compressive
strength/ stress area
of a board.
Condition specimens
for 45 days
4.3.7.1 Long term water EN 12087 200 x 200 2 Method 2A
absorption by
immersion
4.3.7.2 Long term water EN 12088 500 x 500 2 –
absorption by
diffusion
4.3.8 Freeze-thaw EN 12091 500 x 500 1 Set A
resistance
   100 x 100 or 5 Set B and B
1 2
   150 x 150 3 Set B and B
1 2
4.3.9 Water vapour EN 12086 See 6.1 in 3 Conditions, Set A
transmission EN 12086:1997
properties
4.3.10 Release of EN 16516 See EN 16516 See EN 16516 See EN 16516
dangerous
substances
4.3.11 Reaction to fire of See EN 13501-1 and EN 15715 See Clause 6 of
the product in EN 15715:2009
standardized
assemblies
simulating end use
applications
4.3.12 Shear strength EN 12090 250 x 50 x 5 Single specimen –
thickness, (max Condition specimen for

50 mm thick) 45 days
200 x 100 x 3 Double specimen –
thickness, (max Condition specimen for
50 mm thick) 45 days
a
Full-size product thickness, except for 4.2.3.
".
12 Modification to Clause 6, "Designation code"
Replace the first paragraph with the following:
"If a designation code is provided, it shall be given as follows:"
7

---------------------- Page: 9 ----------------------

SIST EN 13164:2013+A1:2015/oprA2:2018
EN 13164:2012+A1:2015/prA2:2018 (E)
13 Modification to Clause 7, "Assessment and Verification of the Constancy of
Performance (AVCP)"
Replace the subclauses with the following:
"7.1 General
The manufacturer or his authorized representative shall be responsible for the conformity of his
product with the requirements of this European Standard. The Assessment and Verification of
Constancy of Performance (AVCP) shall be carried out in accordance with EN 13172 and shall be based
on Type Testing (TT), Factory Production Control (FPC) by the manufacturer, including product
assessment and tests on samples taken at the factory.
The compliance of the product with the requirements of this standard and with the stated values
(including classes) shall be demonstrated by:
— Type Testing (TT),
— Factory Production Control (FPC) by the manufacturer, including product assessment.
If a manufacturer decides to group his products, it shall be done in accordance with EN 13172.
7.2 Type Testing (TT)
All characteristics defined in 4.2 and those in 4.3 if declared, shall be subject to Type Testing (TT) in
accordance with Annex B.
For the relevant characteristics, TT on products corresponding also to EN 14307 and EN 14934 may be
used for the purpose of TT and Declaration of Performance (DoP) according to this standard.
7.3 Factory Production Control (FPC)
The manufacturer shall establish, document and maintain an FPC system to ensure that the products
placed on the market comply with the declared performance of the essential characteristics.
The minimum frequencies of tests in the factory production control (FPC) shall be in accordance with
Annex B of this standard. When indirect testing is used, the correlation to direct testing shall be
established in accordance with EN 13172.
For the relevant characteristics, FPC on products corresponding also to EN 14307 and EN 14934 may be
used for the purpose of FPC and Declaration of Performance (DoP) according to this standard.
7.4 Initial inspection
The initial inspection of the factory and of FPC shall be done in accordance with EN 13172.
7.5 Continuous surveillance
The continuous surveillance of FPC shall be done in accordance with EN 13172.".
14 Modification to Clause 8, "Marking and labelling"
Delete the note and example.
15 Modifications to Annex B, "Product type determination (PTD) and Factory
production control (FPC)"
Replace the current title of the annex with: "Type testing (TT) and factory production control (FPC)".
Replace Table B.1 with the following:
8

---------------------- Page: 10 ----------------------

SIST EN 13164:2013+A1:2015/oprA2:2018
EN 13164:2012+A1:2015/prA2:2018 (E)
"Table B.1 — Minimum number of tests for TT and minimum product testing frequencies
b a,c
TT FPC
Clause
Minimum

number of Minimum testing frequency
c,d
tests
Indirect testing
No Title  Direct testing
Test method Frequency
A minimum of Manufacturer's
Initial value 1 per 24 h 1 per 24 h
10 tests are method
needed
statistically
Thermal resistance –
4.2.1
with a
Thermal conductivity
Aged values: 1 per 2 years – _
minimum of 4
from the TT.

4.2.2 Length and width 4 1 per 2 h
...