EN 13164:2012+A1:2015/prA2

Thermal insulation products for buildings - Factory made extruded polystyrene foam (XPS) products - Specification

DOW = DAV + 21 months

Wärmedämmstoffe für Gebäude - Werkmäßig hergestellte Produkte aus extrudiertem Polystyrolschaum (XPS) - Spezifikation

Produits isolants thermiques pour le bâtiment - Produits manufacturés en mousse de polystyrène extrudé (XPS) - Spécification

Toplotnoizolacijski proizvodi za stavbe - Proizvodi iz ekstrudiranega polistirena (XPS) - Specifikacija

General Information

• Status: Not Published
• Publication Date: 09-Apr-2020
• Withdrawal Date: 11-Oct-2020
• ICS: 91.100.60 - Thermal and sound insulating materials
• Technical Committee: CEN/TC 88 - Thermal insulating materials and products
• Drafting Committee: CEN/TC 88/WG 2 - Coordinating group
• Current Stage: 4098 - Decision to abandon - Enquiry
• Completion Date: 19-Jul-2021
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Mandate: M/103 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on thermal insulating products
• Ref Project: SIST EN 13164:2013+A1:2015/oprA2:2018 - Thermal insulation products for buildings - Factory made extruded polystyrene foam (XPS) products - Specification

Relations

• Amends: EN 13164:2012+A1:2015 - Thermal insulation products for buildings - Factory made extruded polystyrene foam (XPS) products - Specification
• Effective Date: 06-Sep-2017

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13164:2013+A1:2015/oprA2:2018
01-november-2018
Toplotnoizolacijski proizvodi za stavbe - Proizvodi iz ekstrudiranega polistirena
(XPS) - Specifikacija
Thermal insulation products for buildings - Factory made extruded polystyrene foam
(XPS) products - Specification
Wärmedämmstoffe für Gebäude - Werkmäßig hergestellte Produkte aus extrudiertem
Polystyrolschaum (XPS) - Spezifikation
Produits isolants thermiques pour le bâtiment - Produits manufacturés en mousse de
polystyrène extrudé (XPS) - Spécification
Ta slovenski standard je istoveten z: EN 13164:2012+A1:2015/prA2
ICS:
91.100.60 0DWHULDOL]DWRSORWQRLQ Thermal and sound insulating
]YRþQRL]RODFLMR materials
SIST EN en,fr,de
13164:2013+A1:2015/oprA2:2018
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13164:2013+A1:2015/oprA2:2018

---------------------- Page: 2 ----------------------

SIST EN 13164:2013+A1:2015/oprA2:2018


DRAFT
EUROPEAN STANDARD
EN 13164:2012+A1:2015
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA2
September 2018
ICS 91.100.60
English Version

Thermal insulation products for buildings - Factory made
extruded polystyrene foam (XPS) products - Specification
Produits isolants thermiques pour le bâtiment - Wärmedämmstoffe für Gebäude - Werkmäßig
Produits manufacturés en mousse de polystyrène hergestellte Produkte aus extrudiertem
extrudé (XPS) - Spécification Polystyrolschaum (XPS) - Spezifikation
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 88.

This draft amendment A2, if approved, will modify the European Standard EN 13164:2012+A1:2015. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13164:2012+A1:2015/prA2:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13164:2013+A1:2015/oprA2:2018
EN 13164:2012+A1:2015/prA2:2018 (E)
Contents Page
European foreword . 3
1 Modification to the European foreword . 4
2 Modifications to the Scope . 4
3 Modifications to Clause 2, "Normative references" . 4
4 Modifications to Clause 3, "Terms, definitions, symbols, units, abbreviated terms" . 4
5 Modification to Clause 4, "Requirements" . 5
6 Modification to 4.1, "General" . 5
7 Modification to 4.2.1, "Thermal resistance and thermal conductivity" . 5
8 Modification to 4.2.5.3, "Durability of thermal resistance and thermal conductivity
against ageing / degradation . 5
9 Modification to 4.3.10, "Release of da
...