oSIST prEN ISO 7719:2024
(Main)Fasteners - Prevailing torque hexagon nuts - Regular nuts (all metal) (ISO/DIS 7719:2024)
Fasteners - Prevailing torque hexagon nuts - Regular nuts (all metal) (ISO/DIS 7719:2024)
ISO 7719:2012 specifies the characteristics of prevailing torque type all-metal hexagon regular nuts with threads from M5 up to and including M36, in product grade A for threads up to and including M16 and product grade B for threads above M16, and with property classes 5, 8 and 10.
Verbindungselemente - Sechskantmuttern mit Klemmteil - Normalhohe Muttern (Ganzmetallmuttern) (ISO/DIS 7719:2024)
Fixations - Écrous hexagonaux autofreinés - Écrous normaux (tout métal) (ISO/DIS 7719:2024)
L'ISO 7719:2012 spécifie les caractéristiques des écrous hexagonaux normaux autofreinés tout métal, de diamètre de filetage M5 à M 36 inclus, de grade A pour les filetages jusqu'à M 16 et de grade B pour les filetages supérieurs à M16, et de classes de qualité 5, 8 et 10.
Vezni elementi - Šestrobe zaščitne matice - Navadni matice (vse kovine) (ISO/DIS 7719:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN ISO 7719:2024
01-julij-2024
Nadomešča:
SIST EN ISO 7719:2014/AC:2014
Vezni elementi - Šestrobe zaščitne matice - Navadni matice (vse kovine) (ISO/DIS
7719:2024)
Fasteners - Prevailing torque hexagon nuts - Regular nuts (all metal) (ISO/DIS
7719:2024)
Verbindungselemente - Sechskantmuttern mit Klemmteil - Normalhohe Muttern
(Ganzmetallmuttern) (ISO/DIS 7719:2024)
Fixations - Écrous hexagonaux autofreinés - Écrous normaux (tout métal) (ISO/DIS
7719:2024)
Ta slovenski standard je istoveten z: prEN ISO 7719
ICS:
21.060.20 Matice Nuts
oSIST prEN ISO 7719:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 7719:2024
---------------------- Page: 2 ----------------------
oSIST prEN ISO 7719:2024
DRAFT
International
Standard
ISO/DIS 7719
ISO/TC 2/SC 12
Fasteners — Prevailing torque
Secretariat: DIN
hexagon nuts — Regular nuts (all
Voting begins on:
metal)
2024-06-06
Fixations — Écrous hexagonaux autofreinés — Écrous normaux
Voting terminates on:
(tout métal)
2024-08-29
ICS: 21.060.20
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 7719:2024(en)
© ISO 2024
---------------------- Page: 3 ----------------------
oSIST prEN ISO 7719:2024
DRAFT
ISO/DIS 7719:2024(en)
International
Standard
ISO/DIS 7719
ISO/TC 2/SC 12
Fasteners — Prevailing torque
Secretariat: DIN
hexagon nuts — Regular nuts
Voting begins on:
(all metal)
Fixations — Écrous hexagonaux autofreinés — Écrous normaux
Voting terminates on:
(tout métal)
ICS: 21.060.20
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 7719:2024(en)
© ISO 2024
© ISO 2024 – All rights reserved
ii
---------------------- Page: 4 ----------------------
oSIST prEN ISO 7719:2024
ISO/DIS 7719:2024(en)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Dimensions .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.